screws Italy

... and a special black phosphating treatment on the surface is added. They can be used up to a peripheric speed of 30 mt/sec. Beyond this limit it is advised to usehigh resistance materials. Our pulleys are balanced according to the ISOG16 standard. Pbushes are made of GG25 grey cast iron and a special black phosphating treatment on the surface is added. They have a H7shaped bore and a complete set of screws to be fixed at the pulley.

In Breganze, in the province of Vicenza, the company Comex operates internationally in the production and distribution of high-quality interchangeable spare parts for Laverda, Fiat Agri, New Holland, and Claas harvesters. We can provide spare parts in very short times, and also produce new components here in a short time. We have 4 warehouses to produce, store, design, and supply our current and f...

...Cup elevators, abrasive recovery screws, abrasive regeneration selector, dust filter, electrical panel. Max cylinder diameter: 400 mm Max cylinder height: 1250 mm Number of turbines: 3 Turbine diameter: 330 mm Turbine motor power: 7.5 kW Total installed power: 26.85 kW...

... before use. Elastocap-D must be applied by spraying with low pressure airless devices. It must be applied on both sides of each sheet. Sheets must be removed from the fasteners (hooks, screws, nails, etc. ) with the utmost care not to damage the sheets themselves. After uninstalling the sheets, handled with care in order to avoid falls and/or shattering, should be dropped to the ground with adequate...

...Straight brackets made of cold-formed sheet steel, fitted with housing for supporting the roller axle.The choice of brackets to be welded or secured by screws depends on the type of roller to be supported and the installation to be achieved.See diagrams and tables.

...Austenitic stainless steel A2: Aisi304Cu (EN 1.4567) Austenitic stainless steel A4: Aisi316Cu (EN 1.4578) The tensile test and the maximum clamping force test is carried out with steel and aluminium, for steel screws of resistance class 12.9, while stainless steel, with screws of resistance class A2/70.Resistance values may be subject to changes...

...Imeta has also developed Cover Feeders that can feed aerosol tops and bottoms and special components such as varnish rings or deepdrawn covers, as well as a wide range of special feeders with three or four screws for rectangular or oval covers.

...Properties • no screws, pull-in sleeves or stiffeners in contact with the product on which the product can deposit • all parts that come into contact with the product are suitable for contact with food • continuously welded seams • hinged, lateral inspection hatch, which closes practically without dead space, with replaceable and washable seal • parts in contact with the product made of stainless steel with material certificate 3.1 according to EN 10204 • available for applications in positive or negative pressure or equipped with a fan...

...Painted steel litter bin for urban furniture, complete with bracket, pole, and bin, including screws, black PVC cap, to be anchored to the ground. Dimensions: Length: 26 cm Width: 35 cm Height: 120 cm Weight: 8 kg...

...Tedeschi Gomma produces flat gaskets, flat washers, or rubber NBR75 Sh/A washers. These gaskets are used as: spacers for screws, seals for faucet seats, seals for engine oil caps, for oil filters, for oil level seals, cable seals for pumps, anti-vibration spacers for pressure washers, seals for the front of pneumatic valves, seals for lamps in amusement parks, seals on mushroom valves of foot-operated mixers, and drip-proof seals for self-tapping screws on water drains.

...FITTINGS: GAS / JIC / ORFS / METRIC / DKOS / DKOL. WASHING FITTINGS FOR PRESSURE WASHERS EYELETS / FLANGES / HOLED SCREWS...

... ability to differentiate the specific load within the same hot section allows for varied temperatures in different parts of an element. Technology with integrated cold parts is also available. You can purchase the cable already cut to size and finished according to your needs, or wound on a spool. Upon request, it can also be completed with accessories: bipolar plugs for connection, straps with screws for application to different sizes and models.

...The load-bearing structure made of steel sheet profiles joined by three-way die-cast aluminum joints ensures great robustness and also allows for easy and quick disassembly/assembly of the entire structure. The door can be solid or made of tempered glass with a rotating handle and a key lock; the locking system is at 4 points, and the side and rear panels are removable using screws. The protection rating is IP55 in accordance with standard EN 60529, guaranteed by the continuous cast polyurethane seal.

...Knee-operated command according to the HACCP system trapezoidal handwashing station in AISI 304 stainless steel Pre-assembly of: - timed knee mixer dispensing for about 10 seconds connected to the adjustable spout 800 00 A7 with a reducer of 7 liters/minute - stainless steel drain Ø 1"1/2 - blue and red stainless steel hoses for connection to the network, including adjustable siphon, stainless steel wall mounting support, screws, and plugs...

... needs and requests; will not splinter or crack; durable; recyclable indefinitely. WPC is a composite wood, therefore it can be processed like wood, and consequently, the same equipment can be used; it can be cut, milled, shaped, sanded, and inserts, rivets, and screws can be added. In addition to standard sizes, other sizes are available upon specific customer request, without price increases. IT REQUIRES NO MAINTENANCE...

...The gear hobbing machine model DM 8.0 is designed for the machining of spur, helical and curved gears, endless screws, splined profiles and pulleys. Solidity and power are ensured by large dimension guides and torque motors, for all types of gear hobbing. Its versatility allows to adapt to any customer equipment, for each production code. The shift axis allows the mounting of several tools...

... new digital control unit, is truly cutting-edge; it is also equipped with an adaptive anti-crushing system and can connect safety devices as required by the EN12453 standard. The release mechanism is easy to use and allows the door to be closed even in the absence of power and to lock it. TAIMEN can be equipped with an optional battery kit for emergency opening in case of a blackout. Brackets and screws are fully painted to maintain the aesthetics of the system for a long time.

...Bushing in zamak with external wood thread and internal metric thread. Head with hexagonal hollow imprint. Designed for fastening metric screws to wooden components.

... contamination environments. The door can be mounted on a movable wall, drywall, or masonry. The door frame is equipped with a PVC stop seal and an aluminum snap cap that conceals the fastening screws and signaling systems.

...Waste bin for selective collection, ideal for large facilities such as airports, shopping centers, etc... The external cylindrical structure is made of perforated steel sheet, resting on a circular base of rolled plate. The container is internally divided into 3 sections using sheet metal panels, with each section equipped with a bag holder. The openable lid is finished in 3 colors with identifying text according to the division for waste separation. All the screws are made of stainless steel. http://heliosarredourbano.com/...

...Magnetic board in steel 74 x 57 x 0.12 cm. Wipeable with a damp cloth and/or non-aggressive detergent. Can be fixed to the wall with screws and plugs or with suitable adhesives. The KalaMitica boards are the ideal support for those who collect magnets. Writable product with liquid chalk markers and chalks. The KalaMitica board: space for your creativity. The perfect complement for all...

...High-performance mechanical anchor for through and non-through fixings for medium-heavy loads on uncracked concrete, with European Technical Approval in Option 7 for use on uncracked concrete. - Soft expansion thanks to the 3 sectors in which the body is divided. - External gripping protrusions with anti-rotation geometry. - Internal metric threading allowing the use of various types of screws...

... machine to another; equally fast is the adaptation to the new machine and/or mold. The CA PRESSE auxiliary injection units are offered with plasticizing screws ranging from Ø 18 mm to Ø 55 mm, with injection capacities from 20 g to 700 g and maximum pressures reaching 2500 bar. CA PRESSE has chosen to use electronic and hydraulic components from leading market brands (Bosch-Rexroth, Atos, Parker, Voith, Omron, Gefran), which are easily available internationally.

... can be carried out. The absence of a naked flame, besides lowering costs by more than 50% compared with the use of tanks, allows work to be done even near cables, hoses or other heat-sensitive parts. Functionality Induction heating systems are particularly suitable for: - Brazing - Shaping - Hardening - Before/after heating straightening - Annealing - Removal of: welded pins, suspensions, shock absorbers - Straightening of: shafts, rods, leaf springs, rigid axles - Loosening of ball joints, bolts, silencers, Lambda sensors, wheel arms, screws and rusty elements - Work on the brake discs...

...representing the sound-insulating part of the barrier, consists of a battened or tongue&grooved matchboard. Inside the panel no sound-absorbing material is fitted. The front face is embellished with motifs and drawings of various kinds. An "EPDM" seal is fitted on the vertical sides of the panel front to lock the panel inside the HE profile; an "EPDM" flat seal is also fitted at the panel bottom to avoid breaks between the panels. Bolts and screws include stainless steel screws, 15-micron passivated ring nails, galvanized clips. The wood used is impregnated pinewood; all the wooden elements are impr...

... standard and structural rivets, from inserts to special screws, and to products made to customer specifications. To provide a complete service, we have included in our line the trade of machines for the installation of rivets and manual, pneumatic, and battery-operated inserts. Our mission remains customer satisfaction, and for this reason, we utilize a certified production process compliant with the UNI EN ISO 9001:2015 standard, increasingly convinced that quality remains the foundation for having satisfied customers.</p>...

Since 1966, ARSER has been the leading European manufacturer of high-quality threaded fasteners, used in various mechanical sectors, particularly in window fittings, electrotechnical equipment, and automotive components. We produce standard fasteners in four commercial points (flat, conical, cylindrical, cup), special fasteners, and hex keys. The entire processing cycle, from raw material to finis...

Operating in Veneto since 1992 as a turning shop, MINUTERIE METALLICHE TORNITE BORDIN LUCIANO has continually refined and diversified its activities, reaching today the pinnacle of series production of turned and precision small parts. The operational scope spans various sectors: furniture, footwear, faucets, chandeliers, and window frames. The materials processed include automatic steel AISI 303,...

Puntoviti, a leader in fastening systems, specializes in the sale of bolts, screws, professional tools, and safety equipment. We offer: stainless steel screws, brass, nylon, photovoltaic fastening systems, fasteners, bolts, studs, threaded rods, tensioners, set screws, self-drilling screws for roofing, self-tapping screws, for plastic, anti-loosening screws, adjustment screws, eyepieces, anchors...

The company was founded in 1982 under the name ITALVITI snc to carry out trading in the field of fasteners and bolts in various productive sectors. In July 2002 it adopted its current name COMMERCIAL FASTENERS Srl to meet the new demands of the market and expand its business into diversified industries. The headquarters is located in Pongelli Ostra Vetere (AN) in the interior of the Ancona provin...