bar steel Italy

...Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 45 mm (#14) Plate revolving speed 5÷12 RPM Equipped with electronic programmer up to 50 bends Plate revolving speed:5÷12 rpm Installed power:5.5 kW Machine's weight:765 kg (1687 lb) Machine dimensions:114x90x88(h)cm (45"x35"x35"h)...

...PVC-STEEL cylindrical and tapered rollers with one or two grooves rolled on the steel tube, driven by round belt links in series or individually connected to a transmission bar activated by the motor unit. PVC and PVC-STEEL rollers with flat or toothed polyamide resin PA or steel ACC pulley driven by tangential belt or belt links in series. The diagrams and tables on page 86 show the dimensional...

... matrix binders, it particularly facilitates the achievement of physical and mechanical performances in combination with Unisan mortar, with those of the REPAR, GROUT family and with the structural resins of the SYNTECH family. The optional accessory Connector Steel Aisi 304, supplied separately on request, allows the connection between the passing helical bar and the helical bar positioned deeply on...

...Opens any type of can Easy and efficient mechanical system with pressure adjustment Reversible stainless steel blade Available with clamp locking (OXV55) or with the surface bolted to the worktop (OXP55) Bar length:55cm...

... p is multiple and at the customer's discretion, as for the types of meshes a x b. AVAILABLE SUPPORTING AND INCLINED BARS From plates 20×2 mm to plates 100×5 mm. EDGING Generally obtained using plates of 35×5 mm or 50×5 mm with holes to allow for quicker assembly. INCLINATION OF BARS: 30° or 45°. MATERIALS Galvanized iron, raw or painted, stainless steel, aluminum, or corten steel. INCLINATION OF BARS: 30° or 45°.

...Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of installing the fitting for flexible connection SFU - Pressure / vacuum seal up to 0.2 bar - Disc in aluminum or stainless steel AISI 304 (upon request in AISI 316) - NBR gasket (upon request suitable for contact with food) - HNBR Therban...

...BAR STOCK / THREADED BARS PARTIAL - TOTAL - CUSTOM THREADS ACCORDING TO DIN / ISO / UNI / NFE / ANSI STANDARDS METRIC AND IMPERIAL THREADS MATERIALS: ZINC-COATED STEEL, STAINLESS STEEL, NICKEL ALLOYS, TITANIUM, BRASS, ALUMINUM, DUPLEX, SUPER-DUPLEX, ASTM GRADES, MONEL, ERGAL, NIMONIC COMPLETE TRACEABILITY WITH MILL CERTIFICATES ISSUANCE OF CERTIFICATES 2.2 - 3.1 - PPAP LEVEL 3 - IMDS - VDA LEVEL 2 ISSUANCE OF ANALYSIS WITH FIXED SPECTROMETER (30 ELEMENTS)...

...The company is certified as a steel processing center and offers suitable solutions for civil and industrial construction. We perform flame cutting on beams and produce brackets, angles, and other elements using our bending machine with rods ranging from Ø 6 to Ø 24. We also work with iron to provide all reinforced concrete structures (foundations, columns, slabs, beams).

...The ABSL-RC antistatic bar has been designed for installation in high-speed machines, as it has a strong ability to reduce electrostatic charges. This antistatic bar features a PVC core, where all its electronic components are embedded in epoxy resin, ensuring safety and durability, and it is covered with aluminum, with stainless steel emitters. The emitters are resistively connected to high...

...Brand: ATS Mechatronics - Automazioni Industriali Capitanio (AIC) Min stack size: 300 x 300 mm Max stack size: 1100 x 1100 mm Wire diameter (upon customer's request): 5,5 ÷ 8 mm Knot position: 45 degrees Number of turns (Selectable via control panel): 1 or 2 Turn type (Selectable via control panel): Tight or Loose Installed power: 35 kW Working pressure: 120 bar (Hydr.) Tying cycle: 11,5 s...

... built on a solid painted metal structure for greater protection against scratches and rust. For use in particularly demanding environments, a reinforced Total Steel® version is also available, which features an additional steel sheet body and a dedicated anti-shock bar for the protection of the drive wheel.

...Photocell mixer in polished and chrome-plated cast brass – built-in solenoid valve and battery easy to replace – anti-flooding function stops after 60 seconds of continuous flow – anti-legionella function dispenses for 45 seconds after 24 hours of non-use – powered by a standard 9V alkaline battery for approximately 100,000 uses (2 years) – includes 2 stainless steel flexible hoses 350 mm with special non-return valves and stainless steel filters. Dynamic pressure 0.5-6 bar – maximum temperature 70°C – mounting hole mm.34 for surfaces up to mm.40 thick.

...Single-phase steam generator with a steel casing, automatic refill system with electromechanical water level control in the boiler - True Temp™. Electronic console with functions: thermometer, pressure gauge, hour meter, 'CALC' alert for boiler cleaning. Standard superheated water injection.

...ALL PRODUCTS TUBES RUBBER SHEETS AND ROLLER PROFILES FITTINGS CONNECTORS, TUBES, STAINLESS STEEL VALVES AWH TUBES AND ASME BPE WSG FITTINGS OTHER PRODUCTS HIGH PRESSURE HYDRAULIC FITTINGS High pressure hydraulic fittings are used in the industrial sector for achieving high production performance exceeding 100 bar of pressure. Available in various materials.

... steel, case-hardened and tempered to 60 HRC, and are fully ground to ensure maximum durability, precision, and balance. The Msdtn type chucks are designed with a flange connection (AF) and can mount various types of flanges with ISO-A (DIN 55026), D1 CAMLOCK (DIN 55029), etc. The opening and closing of the collets and expandable collets in the Msdtn chuck occur through hydraulic feed at the lathe spindle nose. For bar machining, the use of double cone collets type BD is recommended.

... control panel, with a power button, temperature adjustment, and LED light activation. The package includes 5 stainless steel trays. 12-month warranty CE certification and digital compliance with the European Community EPREL...

... tolerances, SM Model with increased tolerances, both being made in AISI 316 stainless steel and both available with Duplex shafts. HP Model has crescent shaped rotors in antiseizure stainless steel alloy with shafts in Duplex for counter pressures up to 20 Bar. The OMAC Lobe Pump is modular in design allowing the main parts such as the rotor and seals, to be changed quickly and easily. A wide range of rotors, seals and gaskets is also available.

... move along stainless steel plates, assembled in situ; • mechanical anchoring system consisting of threaded bars or, as an alternative, multidirectional clamps and anchor rods, depending on site requirements; • stainless steel gutter; • "L"-shaped stainless steel profile for under pavement waters drainage; • epoxy mortar strips connecting the joint elements and the bituminous pavement. JOINT TYPE TOTAL MOVEMENT (mm) *X (mm) Y (mm) BRIDGE P. (mm) BELLOWS RAN P 400 400 55 760 220 DOUBLE + SINGLE RAN P 500 500 65 890 270 DOUBLE + DOUBLE RAN P 600 600 75 1040 320 DOUBLE + DOUBLE RAN P 700 700 85...

...Able to gently cut frozen meat. During operation, the height of the cutting bar can be adjusted according to the size of the corresponding blocks to utilize the full capabilities of the machine. Construction: entirely made of stainless steel.

... according to their various needs. The company specializes in professional taps; taps for communities; pedal mixers; shower groups; hose reels; handwash basins; pipes for gas and for loading and unloading washing machines and dishwashers. Its products span the sectors of large installations, community kitchens, traditional kitchens, bar furnishings, plumbing, and irrigation.

... specialize in precision turned small parts, turning of stainless steel, titanium, and aluminum alloys, CNC automatic turning with a movable spindle, CNC turning, and machinable plastic from bar, as well as operations on horizontal and vertical 5-axis continuous machining centers. From our CNC movable spindle lathes, we can achieve, through appropriate programming, parts with diameters ranging from 0.5...

... specialize in precision turned small parts, turning of stainless steel, titanium, and aluminum alloys, CNC automatic turning with a movable headstock, CNC turning, and machinable plastic from bar stock, as well as operations on horizontal and vertical 5-axis continuous machining centers. From our CNC movable headstock lathes, we can produce parts ranging from a diameter of 0.5 mm to 38 mm, with fixed...

Alex offers its customers professional items including cash registers, appliances for communities, stainless steel furnishings, and custom designs for bars. The qualified and competent staff provides attentive sales and repair services for slicers and scales, installation of counters, cold rooms, and blast chillers. Each customer is assisted with great care and courtesy to provide the best and...

... corporate concept that bases its development on investment and innovation. For this reason, not only have we focused on providing continual employee training and developing targeted partnerships, but we have also added titan bars, tubes, and sheets to our core business in steel, along with special customized pieces and the engineering of titan pieces.

... designs, parts from bar stock and various mechanical processes on ferrous materials, stainless steel, cast iron, and light alloys such as brass, bronze, copper, aluminum, and plastic materials. With the use of extremely precise measuring instruments, final testing can be performed on the various parts. Additionally, the company is capable of carrying out support operations such as small assemblies and/or welding in collaboration with trusted suppliers. Meccanica G.L. operates internationally.

EUROASIA is a direct manufacturer and exporter of high-quality housewares, stainless steel cutlery, cooking utensils, kitchenware, cookware, dinnerware, tableware, bar accessories, pet products, garden tools, bags and purses, and apparel from India and China. Our diverse range of products is exported to major importers, brands, supermarkets, and chain stores around the world. We manufacture...

Sida Pirolisi srl designs, produces, and manufactures neutral furniture such as tables, cabinets, sinks, back bars, bar counters, coffee furniture, pyrolysis stoves, and grills for the restaurant, hotel, bar, catering, pizzeria sectors, etc. We create custom products for your establishment. We produce with seriousness and quality, crafting furniture from stainless steel 304 and 430 in various thicknesses. Contact us for quotes and price lists. We are always available to improve and enhance our services, taking your suggestions and advice with professionalism and expertise.

... 55 with thermal protection, dry combustion chambers made of stainless steel, double coils that are phosphated and constructed without welds, tested for pressures starting from 600 bar in standard models, and the hoses are specific for high pressures. Ease of use: the assembly and mounting methods are designed for extreme ease of maintenance. All components are easily accessible for any control needs, allowing for more timely interventions.

... with years of experience, it offers an extremely articulated and flexible production structure, capable of producing mechanical parts and structures in various shapes and sizes for any production sector. TOMASONI MECCANICA can also provide assembly, painting, and the creation of hydraulic, pneumatic, and electrical systems. It is a partner of Rides and Fun for amusement park equipment www.ridesandfun.com and www.imecengineering.it for the steel and packaging sectors.