chemical material Italy

... formulation into the porosity of the material, even without mechanised pumping systems being set up. Being deprived of its source of damp, the masonry above the operation will gradually and slowly yield its residual moisture content by evaporation. Since this process can crystallise the salts contained in the masonry, bleaching and saline efflorescence effects may occur on the surface of the exposed masonry...

... toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: AISI 304 / AISI 316 / AISI 316Ti • Discharge door with round profile, building the bottom side of the mixing chamber • Front side inspection door complete with safety electric lock • Electric control panel with inverter for speed variation of the main rotor shaft • Internal finishing with roughness Ra 0.5-0.8 µm...

...High performance physicalchemical separation process for water clarification, sludge thickening and raw material recovery.

... chemical products.","DESCRIPTION":"Low safety footwear type S2 SR FO","ITEM CODE":"WP-LINCE","Toe Cap":"Composite non-magnetic material. Greater comfort and 50% lighter than steel.","Available Sizes":"35-46","Weight":"450 g (size 40)","Metal Free":"YES","NAME":"LINCE","Inner Lining":"Breathable perforated fabric. Facilitates sweat absorption to ensure high comfort even with intensive use.","Insole":"Footwear comes with an internal insole and an additional insole in poroton for added comfort."}...

...USAGE removable seal for inspecting concrete or other material manholes with the possibility of a finish matching the surrounding pavement. Made of AISI 304 stainless steel, it is also suitable for areas particularly exposed to corrosive substances and in environments where maximum hygiene is required (food, dairy, chemical industries, etc.). Complete with TTQST 8×80 bolts. EXAMPLE porphyry...

... even against very aggressive agents such as oxidizing acids. The amorphous structure allows the alloy to be non-ferromagnetic and therefore not attracted to magnetic fields. Niplate 500 has extremely low porosity even at low treatment thicknesses. This effectively protects the base material from corrosion, especially in the case of iron or aluminum alloy items.

... BS6920 and FIRE TEST REPORT F180. Product suitable for use on laminated and/or solid wooden supports. These types of supports can be very heterogeneous in structure, type, and composition. It is recommended to conduct on-site tests to assess the load-bearing capacity of the fixing point. Ease of penetration into porosities and hollow areas. Allows for secure fastening without expansion and therefore without stress on the base material, and is resistant to acids and solvents, adapting to repairs and applications on all support materials.

... logistical point for the supply of any type of building material. We deal in both wholesale and retail of construction materials, renovation supplies, building equipment, tools, insulation, clothing, safety gear, chemical products, paints, varnishes, and consumables. We have a showroom primarily aimed at private customers, where clients can personally view a wide range of tiles, parquet flooring, interior doors, stoves, and thermo-fireplaces (both pellet and wood).

...and pe-hd, are guaranteed for a vast range of chemical products. Designed to withstand heavy-duty work in transferring corrosive and aggressive liquids, they are used in various sectors: chemical, pharmaceutical, steel, galvanic, energy, tanning, and many others. Pumps with no metallic parts in contact with the pumped liquid. At the service of the customer, the study, sizing, design, construction, and commissioning of suction systems, which can consist of hoods, suction inlets, fittings, and piping in plastic material, extraction fans.

... pe-hd, are guaranteed for a vast range of chemical products. Designed to withstand heavy-duty work in transferring corrosive and aggressive liquids, they are used in various sectors: chemical, pharmaceutical, steel, galvanic, energy, tanning, and many others. Pumps with no metallic parts in contact with the pumped liquid. At the service of the customer, the study, sizing, design, construction, and commissioning of suction systems, which can consist of hoods, suction inlets, fittings, and piping in plastic material, extraction fans.

... material ordering phase to the post-sales assistance phase. Certification AD 2000 W0 and PED 2014/68/EU for the processing of carbon steel for the production of domes. The domes are used in the thermal sanitary, food, chemical-pharmaceutical, and cryogenic sectors. In the industry for the production of tanks, pressure vessels, and for LNG, and in the production of braziers, pumps, and household...

The Textile Services Center of Prato is a laboratory specialized in chemical, physical, and commercial analyses of food and agro-food products as well as textile products. All tests conducted at the laboratory are performed according to current international standards by professionals registered with the Register of Expert Chemists at the Civil Court of Prato and Florence. Certified reports are...

... rooms are available for conducting technical micronization tests from small quantities to large batches. FPS offers a complete range of machines that ensure the micronization of powders of any type of material. Starting from the initial research phases in pilot plants and then in production facilities, FPS machines provide the appropriate equipment for any batch size at every stage of development. FPS...

... environmental balances, proposed and pursued by raw material producers. Valvosacco, in fact, only uses top-quality paper sourced from forests with planned and controlled deforestation and boasts contacts throughout Italy and much of Europe, in the sectors of cement, hydraulic binders, starches, carbonates, and in the milling, feed, and chemical industries.

... products. Upon request, we can issue quality certificates verifying the chemical and mechanical characteristics of our products. By using certified European raw material suppliers, we ensure complete traceability of our productions. Inoxdadi s.r.l. stands for quality and service, guaranteed.

... the sector, the use of highly pure raw material suppliers, and the collaboration of highly qualified agronomists, chemists, and researchers, GAP CHEMICAL is able to provide a complete and effective range of biostimulants, special fertilizers, and resistance inducers for all enological phases of any crop.

...covered enclosures, and all those areas subject to foot traffic. All products from Plastiche 3F s.r.l. are made from recycled and recyclable plastic, non-toxic and free from polluting chemical agents. By using this type of raw material, the company contributes to the global recycling of plastic materials.

... more effectively on the hair. Essential for pre-drying, even for very long hair, which will become softer and shinier. You will save precious time! It is designed, developed, and entirely built by us in ITALY with the utmost care and professionalism. The material used is rigid polyurethane (Baydur® 60, Baydur® 110), with high resistance to chemical agents and mechanical stress, and can be disposed...

...which led to the development of a screw chip transport system that, due to its universality and operational versatility, was granted an international patent. This transport system is capable of moving metal chips of any morphology and any metallic material, both in pits and overhead. The company manufactures centralized chip transport systems, fluid centrifugation and filtration systems, individual conveyors for moving chips, scrap, hot forging or foundry pieces, and materials of all kinds.

... main families: HPE series (high pressure) and LPE series (low pressure). These machines are designed to interface with automated rotary systems, such as carousels and merry-go-rounds, through manipulators and pouring robots. The company is equipped with an active chemical laboratory focused on the development of new polyurethane products, quality control of polyurethane system production, and technical assistance to customers through problem and process analysis.

... uses are diverse: from the chemical industry, water supply, and irrigation (generally for the transport of fluids under pressure up to 16 atmospheres) to the food industry, thanks to the use of PVC, a thermoplastic material compatible with food fluids in accordance with current international regulations. The company has developed an elaborate quality management system (QMS) internally, in accordance with the international standard UNI EN ISO 9001:2008.

...Third-party processing - Electrostatic painting - Liquid - Powders - Metal stripping Pyrolytic and chemical - CERTIF. UNI EN ISO 9001/2000...

...REPETTO GIULIANO DI PAOLO REPETTO & C. S.A.S Fax YOU WILL FIND THE WIDEST RANGE OF COLORS AND PAINTS, STANDARD AND SPECIAL CHEMICAL PRODUCTS EQUIPMENT FROM THE BEST BRANDS PRODUCTS AND CYCLES FOR CONSTRUCTION - BODYWORK - INDUSTRY CERTIFIED ECOLOGICAL PRODUCTS AND CYCLES FOR THE HOME P Computerized reproduction of the desired color on any material at the service of customers FREE TECHNICIAN SURVEY - HOME DELIVERY GARAGE ROBUSTELLI DISTRIBUTION CENTER PRIVATE GARAGE the first...