stainless steel bearing Germany

...Double universal joints made of stainless steel for use in corrosive environments. Sliding bearing construction with one large and one small pin secured by a retaining ring. Outer diameter 9.5-63mm (0.375"-2.00") Nominal torque 1.6Nm-340Nm Breaking torque 27.1-1762Nm Operating speed up to 1000 RPM (dependent on lubrication) Operating angle up to 90° (45° per joint) Minimal play Regular...

...The balls of the HQW bearings are made of stainless steel (X65Cr13) as standard. However, for particularly demanding applications, ceramic balls made of silicon nitride or zirconium oxide are used. For the spindle ball bearings from HQW, only balls from accuracy classes Grade 3 and 5 are used. These two classes meet the highest tolerances regarding dimensions, roundness, and roughness.

...1) Most common geometry: Radial 2) Thickness [mm], width [mm], length [mm]: Thickness 5-20 mm, width 10-50 mm, diameter 10-300 mm 3) Materials: Chrome steel, stainless steel 4) Uses: Mechanical engineering, automotive industry, electric motors The exact specifications depend on the specific requirements and structural conditions.

...Stainless steel wheels, either pressed or solid welded. Available with various wheels made of polyamide, polyurethane, rubber, and elastic solid rubber. Stainless steel wheels with rustproof housings made of high-quality, rustproof chrome-nickel steel, either pressed or solid welded. Available with various wheels made of polyamide, polyurethane, rubber, and elastic solid rubber. The wheels are equipped with rustproof roller bearings or deep groove ball bearings or with plain bearing holes. Wheel diameter: 35 - 200 mm Load capacity: 50 - 2,000 kg...

...In the case of larger bearings and bearing elements, adjustment of the rotational resistance is simplified by using washers between the split inner or outer rings. The washers are made of stainless steel. For the coordination it is advisable to provide a theoretical starting gap of 0.5 mm in the design.

...• Dimmable, high-quality LED spotlight for indoor and outdoor use • For atmospheric accent lighting even in inconspicuous places • Very small and elegant design - discreet during the day • High protection rating of IP 68 due to high-quality encapsulation • Load-bearing up to 3 tons, making it ideal for paths and driveways • V2A stainless steel housing with square or round bezel • Also available...

... following new features: - One-sided rotor bearing - Rotor can be removed for cleaning - No product-contacting bearings - Mechanical seal in hygienic design - Polished surfaces - Sight glasses for the product chamber The hygienic design of the new HYVAP meets the common GMP requirements. The evaporators are available in sizes from 0.2 m² for laboratory applications up to 6 m² for industrial applications. Heating is provided, for example, by low-pressure steam or hot water. Material: Stainless steel, carbon steel...

...Spigot according to ASME B16.48, with RTJ groove female, from the manufacturer. Spigot according to ASME B16.48, with RTJ groove female, also available as male type. In all steel and stainless steel grades with acceptance certificates 3.1 or 3.2-TÜV possible.

...Temperature sensor T.4.-0. / type K or type J thermocouple / bearing temperature - Stainless-steel stick-in sensor, thermocouple. Compact and robust design. Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via compression fitting. Type K or type J thermocouple; two thermocouples per sensor available as an option. Available in various immersion depths. 90...

... are paramount. Typical areas of application include the automotive industry, mechanical engineering, and electronics, where a uniform layer is applied to materials such as stainless steel, copper, bronze, and aluminum alloys to ensure protection in aggressive environments. Chemically Nickel for optical functional surfaces is specifically designed for applications that require high optical...

...Grid grates with various mesh sizes, with load-bearing cross-sections adapted to load and span, featuring a smooth or slip-resistant profiled surface. Grid grates available upon request with cutouts as well as accessories such as closures and hinges. Grid grates as individual covers made of stainless steel V2A, V4A pickled or hot-dip galvanized steel, with corresponding angle frames for embedding in concrete or with support angles for bolting, including fastening materials, available.

...With dosing screws, precise volumetric dosing of bulk and flowable goods is achieved. The depicted system is used, for example, for the dosing of hazelnuts. It is made of stainless steel and features external bearing support. You can obtain dosing screws in the size and design that suits your application.

... modifications. The NASH 2BE5 model is available in cast iron, with stainless steel coming soon. The 2BE5 is perfect for use in mining, filter applications, paper mills, power plants, chemical plants, refineries and more.

... slow speeds and intermittent service. Applications Water turbines, injection molding machines, packing machinery, food and beverage industry, printing machines, shut-off values, hydromechanical engineering, tire molds, construction equipment and many more. Structure 1. Low-friction surface film 2. Bearing layer (bronze) 3. Solid lubricant (PTFE) 4. Stainless steel backing...

...Heat-resistant plastic wheel 100x35mm, black, with Teflon axle tube. Heat-resistant plastic wheel 100x35mm, gray, ball bearing. Swivel caster with stainless steel housing, 4-hole or single-hole mounting.

...• WD: Length L = 0,2 - 4 m \ Tmax = 90°C • WDS: Length L = 0,2 - 6 m \ Tmax = 200°C • backlash free, exact torque transfer without additional intermediate bearing • high speed, low moment of inertia • very easy to fit with splitted hub design • torque range: 15 - 1600 Nm • shaft diameter: 6 - 85 mm Material bellow:stainless steel Material hub:sizes 15 – 400: high-tensile aluminum / sizes 800-1600: steel – oxidized Material intermediate pipe:aluminum – optional: steel, stainless steel, CFC temperature range:-40°C up to +200°C Torque range:15 - 1600 Nm Shaft diameter:6 - 85 mm...

... AGION antibacterial coating • Integrated cleaning system • Condenser air filter • Double defrosting system • Outer casing made of stainless steel, DIN 1.4509 with rounded edge protection • Water-bearing parts made of food-safe materials • All dirt-prone components can be accessed from the front for service and cleaning purposes Item number: 1388772273037382 Capacity: 1 x storage container 68 kg Performance: approx. 210 kg in 24h Energy consumption: 35 kWh/24h Water consumption: 2200 l...

...Construction-approved anchor rails Type 40/22, 50/30, and 52/34 The anchor rails not only offer excellent adjustability but also significant time advantages during installation. The result: faster construction progress and thus cost savings. Safe and Reliable > No damage to the load-bearing reinforcement > Suitable for components with fire protection requirements > Suitable for...

...Post-and-beam constructions allow for the creation of various facades. The load-bearing structure is formed by post and beam profiles in different construction depths, which can be combined depending on static requirements or the desired visual impression. As an additional design option, a diverse range of cover shell programs with design cover shells is also offered in stainless steel. The highly thermally insulated construction ensures compliance with the current legally required energy-saving regulations.

... small balls find highly precise applications in medical technology, the computer, watch, and writing instrument industries. With our large balls, with diameters up to 250 mm, we serve large bearing applications in the field of renewable energies as well as heavy machinery construction. Certified according to IATF 16949:2015, DIN EN ISO 9001:2015, NAT certificate, EMAS certificate, and DIN EN ISO 14001:2015.

... assemblies. With our welding certifications according to DIN15085-2 CL1 for rail vehicles, EN1090-2/-3 EXC3 for load-bearing structures, and AD 2000 HP0 for pressure equipment, we also meet your demanding requirements.

... according to German, Japanese, and American standards. The products manufactured according to German standards are dimensionally identical to those of INA, SKF, and FAG. In the housing bearing sector, PTI is one of the leading manufacturers worldwide and offers a good alternative in terms of quality and price to INA products. Furthermore, we are capable of producing special and custom bearings, as well as drive technology products according to your drawings and specifications.

...and AKN. Program expansion through certified suppliers with ball bearings made of stainless steel and plastic, inch-sized bearings, miniature bearings, high-precision bearings, sleeve bearings, pedestal bearing housings, linear technology, tool sets for bearing installation and removal, maintenance products, etc. Own manufacturing or services Special bearings of all kinds, cylindrical roller bearings, four-point bearings, angular contact ball bearings, deep groove ball bearings, electrically insulated rolling bearings, angle rings, bearing modifications Export Europe...

...HYDROKOMP supplies the industrial sectors of agricultural machinery construction, operating equipment construction, mold making, handling technology, robotics, fixture construction, tool making, and machine tool construction worldwide. We design and manufacture manual couplings with safety engagement, stainless steel coupling mechanisms, and coupling nipples in nominal sizes 3/5/8/12, multiple...

...sawtooth and woven designs, as well as handrails and railings that can be elegantly covered in leather. Product overview: indoor staircases, outdoor staircases, design staircases, glass staircases, steel staircases, wooden staircases, space-saving staircases, stainless steel staircases, stringer staircases, aluminum staircases, special staircases, design indoor staircases, stair treads and...

...Welcome to Melzer Fastening Technology, one of the leading specialists in masonry brackets. Our masonry brackets are designed to support the self-weight of facing masonry. The weight is transferred to the building's load-bearing shell. With a height adjustment of ± 3.5 cm, existing construction tolerances or inaccuracies of anchors are compensated. Features: - tested anchoring - very good adjustment options - comprehensive program for facing masonry - stainless steel version available in different variants...

... imperial), miniature ball bearings, stainless steel bearings, spindle ball bearings, machine spindles, clamping body freewheels, labyrinth and gap seals, and lubricants. Since 1996, WAELAG has been involved in linear technology and offers a wide range of linear components and electric linear axis modules, as well as ball bushings, precision steel shafts, bearing units, linear guides, monocarriers, precision-ground and rolled ball screw drives, positioning units, linear axes, and guide rails.

... continuous cooling of electric motors. These units consist of a special axial external fan drive, which is integrated into an external fan cover for protection against damage. In addition to our standard range of external fan units, which are available from stock, we supply units for original equipment as well as retrofitting for all electric motor manufacturers on the market. Furthermore, we supply centrifugal fans/radial fans from 50m³/h to 68000m³/h with direct drive and belt drive for media temperatures up to 200°C, as well as fans in stainless steel and special designs.