output Germany

Welcome to FH Maschinen und Braumanufaktur Werk II GmbH! Since our founding, we have been your reliable partner for top-quality machines and brewing systems. With our many years of experience and our commitment to quality, we are a trusted provider in the food and beverage industry. Our goal is to provide our customers with the best possible solutions to optimize their production processes and en...

... meet individual needs Benefits: - Energy Efficiency: Optimal heat output with low energy consumption - Durability: Robust materials for a long lifespan - Aesthetics: Modern design suitable for any room Trust the Eder Group for your radiator needs and benefit from our years of experience and commitment to quality.

... done via a conveyor belt from a turntable. After filling, the sealing discs are placed from a stack magazine (optionally) and welded to the jar in the next station. The screwing of the closures can also be aligned and is performed with our GSM500 station with precise torque. Various output options are available.

... abrasion-resistant, heat, UV, and solvent-resistant power label the output voltage is indicated by a green LED Input voltage: AC 220/230/240 V or AC 380/400/420 V Switching group: Ii0 with shield winding Output voltage: SELV DC 24 V according to EN 61131-2 Protection class: IP 00 Ambient temperature: max. 60°C Frequency: 50-60Hz Power range: 72 W - 192 W Residual ripple: < 5% Emissions: EN 61000-6 -3/-4, (Class B) Immunity: EN 61000-6 -1/-2 Protection classes: I...

... sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 2 mW to 12 mW in 0.1 mW increments. The...

...The TEC 55 was developed to meet the demand for high throughput rates. Flexibility, easy maintenance, simple settings, synchronisation with the infeed systems, flexibility and quiet operation were the priorities in the development of this machine. The machine achieves an output of up to 80 bags / minute. The most common options and accessories: - Hanger hole - Precutter for easy opening...

... the second palletizing system for output. Defective parts are automatically ejected by the robots. Leak Testing: ATEQ Cameras: 3 units Pallet Storage: 2 units of 20 pallets each Robots: Kuka KR5 Rotary Table: TC 2205 by Weiss...

...• Rogowski coil with amplifier unit • Use with matched current sensor (Rogowski coil L-B22-175) for • universal measurement of alternating currents • standardized output signal 0 ... 1A • measurement ranges 250 ... 4000 A • power supply: 24VDC • compact design in plastic housing • mounting on DIN rail...

... display. Optional versions like e.g. an intrinsically safe version, max. 4 contacts and an analogue output complete the profile. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.5 % FSO — indication of measured values on a 4-digit LED display — rotatable and configurable display module — 1, 2 or 4 independent PNP contacts, freely configurable Optional Features: — IS-version Ex ia = intrinsically safe for gases — pressure port PVDF — customer specific versions...

...MFZ SERIES – FIT 2 PART – YOUR TASK DEFINES OUR MACHINE. Highest performance and output per square meter, at the same time lower costs and higher productivity – that was the task for our engineers and developers at SAMAG MachineTools. The result: the MFZ series with FIT 2 PART. The conception of the new series leaves nothing to be desired. Technological know-how - for the highest precision...

... impacts. The measurement output is digital via an I²C interface, with the address being customer-specific. Thanks to the bus capability of the interface, combining multiple sensors within a system is easily achievable. Measurement range:: 0...80% rH, 80 - 100% rH (short-term); -40..+100°C Accuracy:: +/- 1.8% rH in the range of 10..80% rH; +/- 0.2% rH in the range of 0..10% rH; +/- 0.2° C in the range of 0..60°C Operating pressure:: max. 150 bar...

...Mobile metal detector for connection to a vacuum filler including separation mechanism Metal separators of the MEATLINE 07 O series are connected to the output of vacuum fillers in sausage production. Mechanical connections for all common sausage and ham fillers are available, as well as electronic control adapters for signal exchange between the filler, metal detector, and subsequent systems such as turners or clippers.

...The boiler is high-powered and extremely compact. It is designed in accordance with the Gas Appliance Regulation. — High-efficiency heating output from 650 to 25,000 kW with very high efficiencies of up to 105% — Compact design for easy installation and effective heat utilization — Flexible use and capability for low return temperatures of 50 °C — Individual control concept and optional real...

...• Our smallest series inverter to date • 380VA S1/100% output power • The ideal solution for all CAD/CAM and dental applications • Perfect performance across all power ranges with outstanding acceleration and braking capabilities and 28.5 kHz PWM • Compatible with all temperature sensors: PTC, KTY, and PT100 Output power S1/100%: 380VA...

...) Temperature range: 50 to 3200 °C (depending on model) Optical resolution: 300:1 max Operating ambient temperature: Max. 65 °C; 315 °C with cooling jacket Protection rating: IP65 (NEMA4) Spectral response: 1.0 μm, 1.6 μm, 2.4 μm Accuracy: ±0.3 % / ±2 °C Resolution: 0.1 °C Response time: 2 ms, 20 ms (95 %) Power supply: 20 to 48 Vdc, 500 mA, or via Ethernet cable (PoE) Digital outputs: Ethernet, Profinet Serial output: RS485 Analog outputs: 0/4 to 20 mA Alarm output: Relay 48 V/300 mA...

... as other areas of bulk material processing with lump sizes of up to 280 mm. With its adjustable crushing gap, individually controllable rollers, and the use of various spike roller profiles, the final particle sizes can be tailored to specific products. The smallest achievable output particle size ranges from 0.5 to 20 mm, depending on the roller profile and gap width. The rollers can be operated in both synchronous and friction modes. Scrapers prevent the material from sticking to the crushing rollers.

... between temperature and voltage corresponds to the characteristic curve for the Pt 1000 and is thus nearly linear. The assignment between temperature and output voltage is nearly freely selectable, the lesser temperature corresponding to the lesser output voltage. The sensor‘s lowest possible output voltage is 0.1 V and its greatest is 10 V. The output is overload-proof and short-circuit-proof. The sensor has no mechanical moving parts and so is not susceptible to vibration and soiling.

... both functions while being space-saving in your luggage, making the need to carry separate devices unnecessary. Another special feature is the built-in balancer, which ensures that both batteries are always used evenly during charging and discharging in power bank mode. Use as a power bank: 5V up to a maximum output current of 2.1A - the...

... systems from IFA Technology enable you to optimally compose your mixtures by means of recipe control. In addition to the dosing quantities, other parameters such as stirring times can also be defined. Comprehensive recording of all batch data in a database makes it possible to output automatic order data in conjunction with your merchandise management system.

... device or another may be suitable. From manually probing the geometric elements with a measuring ball to automatic, process-integrated testing devices, FRENCO provides tailored solutions. There are two fundamental variants: Manual Measuring Device for High Flexibility Devices with Measuring Balls • For externally toothed running and fitting gears • Measurements on diameters and bearing seats • Output of runout, pitch, and two-ball measurement • Ideal for random sampling measurements in production...

...Assembly systems for motorcycle transmissions have a tradition at MP GmbH. The first assembly system was delivered in 1997. In the latest systems, housings and wheel sets are measured and then assembled to specifications. After assembly, tests are conducted on shifting, output speed, and backlash. All process data is archived in the MP assembly control computer. Traceability of the transmissions is ensured.

...{"features":["tuned to 2-Step MacAdam for color consistency","available in 6 white tones from 2,300 K to 5,500 K","tool-free connection possible with connector","designed specifically for USB & battery applications with 5 V DC operating voltage","very small pitch of only 3 cm","LED chips with efficient thermal management and good light output","includes reverse polarity protection diode","good...

...Brewery-tested mini filler for small batches of 5-liter party kegs Filling-Fix made of stainless steel operates on a 3-chamber system, resulting in minimal oxygen uptake during the filling process easy to use requires little space low investment costs and thus low risk Hourly output: approx. 25 party kegs of 5 liters Item number: 060938000000...

...Rotating device, particularly suitable for non-orbital components, for high quantities, connects to all Orbitec control systems. Delivery contents: — Rotating device — Three-jaw chuck — Jaw for change — Chuck key — Robust ball joint with central mechanical clamping — Ground cable — Motor control cable with wire output and AVC...

... procedure is started. The intelligent chargers identify the rechargeable battery voltage, the charge current is adapted and the charge process started. The output power here is up to 300 W. This enables the shortest possible charge times with simultaneous exchange of parameters to be realised with applications such as in drive systems, power tools or medical equipment. With the IPC 300W we are delighted to present a universal charger that can adapt to all lithium ion rechargeable battery systems.

... operates fully automatically, is numerically controlled, and monitored by laser. The saw machine, designed for vertical cuts, is versatile and also suitable for cutting larger blocks into smaller ones. Typical performance of horizontal saw: • Block sizes: up to 3000×2000×800 mm • Plate thicknesses: freely programmable, min. 19 mm • Cutting performance: up to 6000 cm²/min • Flatness: better than ± 0.5 mm Typical performance of vertical saw: • Block output dimensions: up to 4000 × 2000 × 1200 mm • Cutting performance: up to 3000 cm²/min • Flatness: better than ± 0.5 mm •...

...Compact filters with connection wires Rated currents 4 – 24 A Low leakage current Very high symmetrical and asymmetrical attenuation Compact design Output with connection wires...

...Flush-grid belt conveyors should be selected particularly for high output. They are easy to assemble and replace...

... stopping-and-starting drives or for direct line-fed travel applications. Thanks to their unique brake principle, they are the first choice wherever demanding requirements have to be met by the brake. Cylindrical-rotor motors:Motor output up to 45 kW, specially designed to match our range of gearboxes Conical-rotor brake motors:Particularly high braking performance, two-speed pole-changing motors...

...The RTR-576 is a three-channel data logger for highly accurate measurement and recording of CO2 concentration, temperature, and humidity. The alarm contact output not only provides quick on-site alerting but can also be connected for use with a ventilation system. The RTR-576-S data loggers have a wireless range of up to 150 m with compatible base units. Data can be transmitted from a logger to...