heating device Germany

... conductivity — Savings on chemicals through demand-based dosing of additives — Efficiency increase of the system through reduced desalination losses and savings on blowdown steam energy — A water analysis device can monitor up to three boilers and can be integrated into plant controls with control technology.

...Our 36kW heating unit offers you a flexible way to utilize mobile heat on-site. The device can be connected to your existing heating system and will take over operation from then on. Connection: 63/36/16A Power: 36kW...

...ideal for underfloor heating and cooling. The individual segments (spacing 55 mm) are made of fiberglass-reinforced, heat- and cold-resistant plastic (-20° to +90° C) with integrated air chambers for thermal insulation in red or blue. Supply segment with integrated shut-off device, convertible to actuator. Return segment with integrated adjustable flow meter, protective cap with sealing eye...

...Suitable for sterilizers in hospitals, clean room humidifiers, air conditioning systems, process steam generators in the pharmaceutical, chemical, and food industries, etc. Design according to EN 285, type-tested, suitable for continuous and discontinuous operation, completely made of material 1.4571 on the pure steam side. The device is fully equipped with all necessary connections for complete pure steam and heating steam regulation, which we can gladly supply to you, along with the insulation, as needed.

...Table presses are suitable for simple pressing of plastic or rubber in granulate, powder, or sheet form (raw rubber) for the production of test specimens for various applications. Standard table presses are designed as electro-hydraulic laboratory presses with up to 20 tons of pressing force and heating plate temperatures of up to 300 °C. The electro-hydraulic pressure control device allows for...

... wire break controls (tandem arrangement). For easier setup, such as changing mandrels and drive rollers, the cutting device can be swung away with a catch basin. The winding process can run unattended. Thanks to proven construction and components, the machine is a reliable and economical production tool.

...Plug-in device as a limit switch for locomotives, trains, and railways for refueling with AdBlue, diesel, and heating oil. According to railway standard BN 74010-01, TAB 01, etc.

...Our holders are made from various materials, consisting either of solid plastic or steel. High temperatures up to +110°C are usually not a problem. Mounting on pipes or insulation is quick and straightforward. We also provide the corresponding signs with engraved text to be inserted into the clamping device of the holder. Upon request, signs with company branding can also be produced. Sign size: 100 x 50 x 2 mm.

... and domestic hot water, thanks to its integrated heat exchanger. In case of heating malfunctions or work on the heat generator, it serves as an emergency heater. Other applications include frost protection and preventive/initial heating, for example, to avoid freezing of ground source heat pumps and air source heat pumps. The transport cart makes the device very mobile and allows for flexible setup. The electric heating mobile can be operational at any location within a short time and with just a few adjustments.

...Whether online at used-machinery-trade or on the 56,000 m² company premises in Riesa, the used machinery trade of Brand GmbH offers a wide range of machines, vehicles, equipment, and systems for trade, agriculture, and industry. You can also find heating and cooling devices at competitive prices. From electric furnaces and hardening furnaces to air conditioning units, climate cabinets, and fan...

... temperature control, the device is equipped with a floor sensor and a room sensor (permanently built into the device). Features: - Individually set temperatures and times - User-friendly touch display - Heating times program mode - Modern design - On/Off mode - Energy-saving - Includes floor temperature sensor The MCS 450 has three different modes: Manual Mode The thermostat maintains the set temperature consistently. ECO Mode The thermostat keeps the temperature at a comfortable and energy-saving 20 °C. Program Mode...

... dehumidifies the surrounding air; a clean side effect in damp basements and rooms. Our heating water heat pumps are delivered ready to plug in and filled. This eliminates the need for a complicated installation. Their simple operation makes them a plug & play device. Control the TE-AWP in conjunction with your PV system and the V-Box or SMA Homemanager to optimize your self-consumption. Your advantages at a glance: ▪ retrofittable at any time for standardized flange ▪ the heat extracted from the air is transferred directly to the heating water via a finned tube heat exchanger...

... times of t90 or t99 of approx. 13 s or 30 s. Oxygen, pH and redox can be determined in parallel. The sensor systems have integrated transient monitoring. Languages and units of measurement can be parameterized. The handheld measuring device is particularly suitable for measurements on hot and steam boiler systems, in district heating systems and power plants. kind of sensors:oxygen and pH/redox...

...Solarbayer membrane expansion vessels for closed heating systems. Solarbayer membrane expansion vessel for closed solar systems, membrane expansion vessels for drinking water. Solarbayer membrane expansion vessels for closed heating systems. Solarbayer membrane expansion vessel for closed solar systems. Solarbayer membrane expansion vessels for drinking water and pressure boosting systems. Solar pre-expansion vessels - safety device according to recognized standards of technology to protect the membrane in solar expansion vessels from excessive temperatures in the event of stagnation.

... of up to 6 samples and short heating and cooling times, thanks to the closed oven principle, allow you to conduct more analyses in the same amount of time. Determining the melting point has never been easier. Each device is equipped with the One Click® quick access button principle, which allows you to start a custom measurement program with a single press on the color touchscreen. All devices comply with common pharmacopoeias and other standards. Optional IQ/OQ documentation is available and can be gladly provided by METTLER TOLEDO service if needed.

...The STE Leak Tester is a testing device for the early and reliable detection of leaks between the combustion chamber and the cooling system. Applications: In case of suspected leaks, overheating, and water loss, after extreme heating due to a defective water hose, V-belt, etc. Advantages of the STE Leak Tester: • A routine check takes only 1 minute and can be performed at any time, whether the...

... and temperature, pressure via manometer - Pressure vessel made of specially coated special aluminum - Outer casing made of durable polyurethane - Housing cover made of stainless steel - Maintenance-free technology - Water drainage valve - Suitable for pressure compaction when the heating is turned off Scope of delivery - Compressed air hose - Water drainage hose - Item No.: D3428 (red housing...

... The 2000A line features the intelligent Riehle heating system with: - digital control for consistent fat temperature - timed heating to prevent fat burning on the heating coils and extend fat lifespan - heating coils in the fat for maximum energy savings and the fastest response to temperature fluctuations. The 2000A line can be enhanced with several special features. This includes an integrated, closed proofing chamber or a drain filter with tank and pump for comprehensive fat maintenance and longer downtime.

...These innovative Hot and Cold Plates for the buffet combine two functions (hot/cold) in one device. Simply place the serving plate with food on it and select the desired temperature range (hot/cold) – that’s it, cooling and warming 24/7 without any further work. No more annoying handling of ice cubes, ice packs, crushed ice, eutectic plates or pre cooling. No conversion of the cooling/heating technology necessary. You can choose between the warm/off/cold functions just by flipping a switch.

...Suitable for welding, cutting, heating, flame soldering, and flame straightening in small work areas. Consists of: 1 handle, 4 welding inserts, 1 cutting insert with lever valve, 1 multi-tool, 1 nozzle cleaning device, 1 nozzle container, 1 steel sheet box Technical specifications: Fuel gas: Acetylene Hose connections according to DIN EN 560: for oxygen G 1/4, for fuel gas G 3/8 LH...

... your core business, the efficient management of your properties. But Funkmess offers even more. Our innovative device solutions not only protect the privacy of your tenants through radio reading systems but also safeguard the return on your property. Our devices can think along and support your needs with a variety of options. For example, the mold function secures evidence for any potential legal disputes, while the high-consumption function identifies critical trends early on.

...Filters protect against pathogens and exhaust gases, trap dirt, and absorb odors. Synthetic filter media offer a textile alternative for filters in heating, ventilation, and air conditioning, air and fuel filtration in automobiles, synthetic vacuum cleaner bags, and device filtration, with high separation efficiency and long service life. Made from the finest fibers, these nonwovens have a high...

...The PAX 3 Smart Vaporizer gently and evenly heats loose plant material without waste. With the push of a button, this gem can be turned on and off. You can easily adjust the temperature either directly on the device or through the accompanying smartphone app. After just about 20 seconds of heating time, the LED logo lights up, and you can start vaping. In addition to loose plant material...

... m to 7.0 m, and for double-axles from 4.0 m to 8.0 m. The body width is 2.20 m, 2.40 m, or 2.50 m. Fast-moving, 80 km/h or 100 km/h Single-axle, double-axle, or with tandem axle With DIN coupling eye, ball coupling, or height-adjustable running device Body lengths: - Single-axle from 2 m to 6 m - Tandem axle from 4 m to 7 m - Double-axle from 4 m to 8 m Body width 2.20 / 2.40 or 2.50 m Round roof...

...The RRIWAN Anemometer INT10 measures the current wind speed and converts it contactlessly into a linear output signal. The sensor is designed to be storm- and weather-resistant. Thanks to its self-regulating heating, it can operate at temperatures as low as -40 degrees. The evaluation is carried out separately via a measuring device, a display instrument, or in the connected control and monitoring technology, e.g., in building technology.

...With this device, you can vacuum, steam clean, shampoo, or do everything at once! With water filtration system and shampoo function Technical specifications: 3200 Watts total power 3200 Watts heating power (boiler) 1200 Watts suction power 9 bar steam pressure 11 bar maximum pressure (safety valve) 184 degrees steam temperature (boiler) 10-liter dirty water tank...

... powerful removal of exhaust air and supply of fresh air. The Ambientika Wireless+ is also among the quietest fans on the market. The integrated ceramic heat exchanger ensures efficient heat recovery from the exhaust air, significantly saving you heating costs. Bathrooms and humid rooms up to 30 m² in size are just as ideal for use as living rooms, bedrooms, and office spaces. What does the complete set consist of? - Interior cover - 2x dust filters - Heat storage unit - Fan unit - Wall installation sleeve - Outdoor hood...

...Our newly developed comb soldering device allows beekeepers to set the parameters of heating power and duration, features electronic current monitoring, and informs the user about the operational status through visual and acoustic feedback. This makes the soldering process simpler, more time-efficient, and safer. By providing a preset power level and automatic shut-off, it prevents accidental...

...Order number: 4.3151.00.00x a defined and optimized dynamic behavior as well as: High measurement accuracy and resolution High damping with a small time constant Low starting value Low power consumption Easy installation The measured value is provided as a digital signal at the output. The output signal can be sent to display devices, recording devices, data loggers, and process control systems. For winter operation, the device (4.3151.00.xxx) is equipped with an electronically controlled heating system.

...The micro burners are versatile and easy to use. They are handy, grip-friendly, lightweight, portable, and easy to refill with butane. Examples of application areas: • Fine soldering and welding tasks • Controlled heating processes • Heat treatments • Glass, ceramic, and plastic materials • Independent soldering and welding tool for any toolbox • Repairs in laboratories and dental labs • Useful device for home, household, and camping • Hobby projects • Waxing tasks • Defrosting processes • Ski waxing processes • Curing tasks • etc.