cnc turning Germany

...Small conveyor belts with internal low-voltage drive, belt widths from 60 to 200 mm. Particularly suitable for use with CNC milling or turning machines. Available with forward and reverse control.

...Our turning department manufactures on modern CNC and NC machines and is well-equipped for the production of turned parts from all materials. Common materials include stainless steel and mild steel, copper alloys, and even plastics. We can cover a diameter range of up to 1,000 mm and a length of 2,000 mm. The exact machinery available can be found in the service directory.

...• CNC turning up to 3,000 mm in length • Cycle-controlled turning up to 5,000 mm in length • Conventional turning up to 10,000 mm in length State-of-the-art CNC lathes equipped with a wide range of accessories such as driven tools, hydraulic steady rests, C-axes, hollow clamping cylinders, etc., enable us to manufacture your products cost-effectively and to high quality standards.

...Our modern CNC lathes can process small to medium series. The advantage of standardized 2-axis CNC turning technology lies in the short setup times and low manufacturing costs, which in turn positively affects the unit costs. In CNC turning, we process all machinable materials; further processing through surface finishing is also possible with us.

... 250 mm. Manufacturing with an accuracy of up to 5 µm. 1 – 1,000 pieces, larger quantities available upon request. Pure turning as well as turning-milling operations. Surface quality up to a center roughness value of Ra 0.1. CNC turned parts according to your material specifications. Heat and surface treatments available.

...CNC-controlled or Manual. Drilling is a subtractive process used for the creation and machining of cylindrical recesses in workpieces. In traditional turning, primarily rotationally symmetrical (round) parts are processed. The modern technology of a CNC lathe allows for the production of workpieces that were previously only possible to manufacture on a milling machine. We also supply custom components as well as complete assemblies or manufacture necessary spare parts that you may no longer be able to obtain from the manufacturer of your (defective) machine. Contact us.

... particularly characterized by the content of ten to thirteen percent chromium, dissolved in a ferritic or austenitic mixed crystal. The significant difference compared to normal black steel lies in the alloying components, which include nickel or niobium. There are clear specifications for the composition of stainless steel, regulated in the European standard DIN EN 100 88, Parts 1 to 3. CNC...

...We specialize in the production of timing belt pulleys, gears, and drive technology of all kinds, as well as CNC turning and milling parts. Ebert GmbH & Co. KG is specialized in the field of drive technology. The engineering company was founded in 1865 in Kirchberg and is now in its 5th generation as a family business. Benefit from over 150 years of experience in mechanical engineering. Steam...

...One of the two focal points of Heinloth CNC manufacturing technology is our CNC turned parts, which we produce for the fields of mechanical engineering, electrical engineering, and automotive for our customers. TURNING One of the two focal points of Heinloth CNC manufacturing technology is our CNC turned parts, which we produce for the fields of mechanical engineering, electrical engineering...

...Machine Park: CNC milling and turning machines, horizontal drilling and milling machines, planing and punching machines, shears, bending machines. We are capable of processing turned parts weighing up to 20 tons, with a diameter of up to 4000mm and a length of up to 500mm, as well as a diameter of up to 2000mm and a length of up to 8000mm. Our diverse services include new manufacturing, single...

...We operate on cycle-controlled CNC lathes using the latest tools and turning technologies. The maximum turning diameter of our CNC lathes is 600 mm, and the maximum turning length is 1,500 mm. In addition, we also turn your workpieces on several conventional lathes. Our machine equipment in this area allows us a maximum flat turning diameter of 1,500 mm and longitudinal turning up to 3,000 mm...

...CNC Turning. CNC turned parts from MBS CNC-TECHNOLOGY & ENGINEERING GMBH: from manufacturing to delivery all from a single source.

...Over time, we have expanded our range. We can also manufacture the housing / screws / rotary knobs, etc. for your product in addition to the circuit board, of course, this is precision work. We offer precision metal processing using the following methods: -CNC MILLING -CNC TURNING -LASER CUTTING -STAMPING For more detailed information or inquiries, please feel free to contact us. We look forward to your message. Your BERATRONIC TEAM...

...With our CNC turning centers, we can fully process turned parts. We manufacture precise and complex turned parts as single or series components in high quality. CNC Turning In the CNC turning area, CNC lathes with a bar passage of up to 65mm, counter spindle, and multiple axes are available. This enables us to be well-equipped for the production of a wide variety of CNC turned parts.

... materials are primarily used for the manufacture of stainless steel turned parts: Material: 1.4301, 1.4305, 1.4307, 1.4401, 1.4404, 1.4571, 1.4021 Stainless steel parts can be turned up to a diameter of 680mm, sometimes also using robotic handling systems. Parts with a maximum diameter of 80mm can be processed directly from the bar. Complex parts with turning and milling operations are also possible!

Our program: Construction of prototypes, pilot series, and series production. We take care of the complete manufacturing of your: Fixtures Assemblies Prototypes Manufacturing according to drawing...

...CNC milling and turning with the highest precision. Dedicated contacts who take care of your concerns at every stage of production. A state-of-the-art machine park for the complete processing of individual workpieces or assemblies. Materials: Monocrystalline materials, titanium and aluminum alloys, nickel-based alloys such as Inconel (e.g., Inconel 718), Waspaloy, Hastelloy, rust- and acid...

...We manufacture precise CNC turning-milling parts with and without driven tools on complex lathes with counter spindle up to 9 axes. Turning with and without driven tools - Complete machining - Maximum bar diameter in mm: 65 - Chuck diameter in mm: 250 - Tolerances according to drawing - Batch sizes: from quantity 1 - All common materials according to drawing - Surface finishing by external suppliers...

...2-spindle solution with a 4-part clamping device Editing the OP 20 after the turning process Piece time less than 90s possible...

The Company Founded in 1999 as a small family business with 2 employees, Jütte GmbH (which evolved from the founding company Jütte Feinwerktechnik and Jütte Drehtechnik GmbH) now encompasses around 2400m² of production space, where our employees work on various state-of-the-art manufacturing centers in a 2-shift operation. In 2016, the company Peter Heger was also acquired, and its expertise was...

Stork GmbH – Your Partner in Machining Technology For over 50 years, we have been your efficient manufacturing service provider for turning, milling, and bending. Our workpieces are used in a variety of fields. Among others, renowned companies from the automotive, hydraulics, and general mechanical engineering sectors count among our clients. We offer a complete solution for all manufacturing tas...

High-quality, flexible, customized digital printing with process solutions Digital printing offers, like no other technology, all the possibilities to produce your print media in the highest print quality and with the right customer engagement – and all at economical conditions. No matter if you are interested in on-demand book production with diverse finishing options, attention-grabbing large ...

...Turning parts can be machined from a bar with diameters ranging from Ø 4 mm to Ø 60 mm, utilizing driven tools as well. For diameters starting from 65 mm, we can process blanks in 3-jaw chucks. The selection of materials for machining ranges from plastics to steels, stainless steels, brass, and aluminum.

...We manufacture your turned parts according to your drawings with up to 4 axes simultaneously. Processing of materials such as steel, stainless steels, non-ferrous metals, and plastics is a matter of course for us. The machining of your components is carried out on CNC-controlled lathes from OKUMA with either 2 or 4 axes. The processing of steel, stainless steels, and non-ferrous metals such as...

...Processing of various materials, including stainless steel, aluminum, plastic, non-ferrous metals, titanium, hard metal CNC turning with driven tools and counter spindle Turning diameter: up to 250 mm Length processing: up to 590 mm...

...CNC Turning with Different Technologies With our two lathes from EMCO and VDF, we are able to apply complex contours to rotationally symmetrical components using driven milling tools on one hand, and on the other hand, the larger machine allows us to process large turning diameters up to Ø650mm.

... accuracy, they automatically produce your specifically requested turned parts. Take advantage of the many years of know-how and quality awareness in CNC turning from ibl Maschinenbau GmbH! Our employees will quickly and non-bindingly provide you with a quote for your production.

...Modern Machines for Demanding Products We offer you a state-of-the-art machine park for the production of complex parts in various dimensions. Our focus is on individual parts and small series. By utilizing CNC machines in all areas of production, we ensure efficient processing and the highest quality. Our emphasis is on milling, turning, and drilling. Additionally, we are equipped for various other machining methods. The CNC capacities mentioned below enable us to provide you with machine parts and complete ready-to-install assemblies at a very good price-performance ratio.

...A comprehensive and powerful setup is also available for CNC machining. Through regular training and continuous development, our employees are specialists even for complex tasks. CNC turning is also possible with driven tools, and up to 4 axes are available for CNC milling. Typical requirements in this area include, for example, drilling, thread cutting and drilling, or the production of flat surfaces, contours, fits, and bearing seats.

...The equipment of the machines is tailored to the requirements of plastic processing. In the manufacturing area "CNC Turned Parts," components with a center distance of up to 800 mm and a turning diameter of up to 80 mm from bar stock, as well as a diameter of up to 400 mm from a chuck, are produced. The equipment of the machines is tailored to the requirements of plastic processing. They...