blowing Germany

As a globally active, technology-oriented trading company, PolyNeo GmbH specializes in the trade of raw and auxiliary materials for the plastics industry as well as semi-finished products derived from them, particularly polymers, additives, and polymer chemicals. It offers its customers the full range of an internationally operating trading company, from procurement to financing and logistical pro...

...chemical blowing agents, microsphere masterbatches, lubricants, demoulding aids, UV stabilisation and more ...

...TOPVENT OPENING VALUE: 5 – 18 lbs/inch BLOWING VALUE: 3 – 7 bar SHELF LIFE: up to 12 months. We recommend cool and dry storage WEIGHT: approx. 1.9 kg/1000 pieces PACKAGING: Carton contains 5,000 pieces...

...Device for cleaning and blowing out holes in aluminum cast parts on stamping machines We manufacture according to our customers' designs or create the design upon customer request. The production of individual parts takes place on our CNC machining centers and CNC lathes. The individual parts receive the required surface coating and are assembled.

... — 200:1 optics for models 1M and 2M — Integrated linear laser — Ethernet TCP/IP communication — Brushless motor with an average lifespan of 40,000 hours — Air blowing at the front and water cooling The DataTemp DP software allows for the subdivision of thermograms recorded by the MP150 scanner into sectors or zones. The temperatures of these zones can then be analyzed using a wide range of...

...Positive displacement blowers and single-stage screw compressors start up directly or following a star delta circuit if no gentle start or no frequency converter control are available. The unit is subjected to heavy mechanical load and requires high start-up current. For this reason, counterpressure must be reduced during the start-up phase; this is achieved by blowing off the increasing volume...

... effective A.B.S. discharge aids, precisely tailored to the properties of the stored goods: Fluid-Ex® With the help of Fluid-Ex®, the air that escapes during storage is reintroduced in a targeted manner, making the bulk material flowable again. Walk-Ex® By periodically blowing in and sucking out air in the air retention cone, it is set in motion. This compresses bulk material bridges and allows for free outflow of the bulk materials. Pneum-Ex® The cone is continuously shaped by several air cushions arranged within the cone...

BIG EASY was founded in 2010. BIG EASY manufactures blow-off booths for cleaning components that have dirt particles on them. BIG EASY produces exclusively in Bavaria, thus 100% Made in Germany. BIG EASY manufactures the blow-off booths, wash tables, and Dewaitering Fluid immersion tanks from stainless steel. BIG EASY produces cleaning booths with noise protection, significantly reducing noise ex...

... your request UL, CE, GMP, FDA, ASME. Available documents up on your request I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification. Vertical blowing system. Servo conveyor system Bottles:blowing, cleaning Pharmaceutical:Machine...

...The blowing machine for brand new glasses is designed for blowing through glasses, thereby removing all contaminants such as glass shards, paper remnants from interlayers, dust, etc. The machine is equipped with automatic activation when glasses are fed in and automatic deactivation when no glasses are present. It is designed for installation on a standard plate conveyor with a maximum trough width of 130 mm and a plate conveyor width of 82 mm. The machine features a worm gear and a transmission from the motor via a belt to three stepped pulleys.

...Excellence in Pharmaceutical TOC Pure Water Analysis and Vaccine Quality Control The system based on catalytic high-temperature combustion offers a wide working range with effective rinsing function, a high degree of automation, and simultaneous blowing and measuring for high sample throughput. Characteristics of the multi N/C 3100 pharma: • TOC determination in direct NPOC mode for high...

Welcome to WEBER Textile Finishing GmbH Weber Textile Finishing GmbH is a renowned company in the textile finishing industry and is certified according to DIN EN ISO 9001:2015. We produce high-quality yarns in various colors and qualities, both in-house and as contract work. Our products are used in the contract sector, airlines, tufting, and weaving, as well as for overlocking yarns for automotiv...

...Fundamental elements of spray drying: - Atomization of a liquid - Providing a hot gas stream through an air heater, combustion process, or heat recovery. - Design of the reaction chamber regarding residence time - Discharge of solid particles - Blowing to generate the required gas flow Generation of particles with defined size and surface atomization techniques: - Single-stage nozzles - Two...

...For customers with their own blowing capacities, we offer the delivery of preforms in various thread types with different grammages. Custom coloring in the desired customer color is possible starting from a minimum production quantity of 50,000 pieces. Please inquire individually about minimum quantities and delivery times!

... bending stiffness/flexibility and the low-friction HDPE outer sheath are optimally matched to the microducts, allowing for long blowing lengths to be achieved. The cable is designed for installation in the ground or outside buildings and is therefore not subject to the Construction Products Regulation. It also cannot be classified in fire class Eca or better.

...The Gronemeyer bottle turner enables the internal cleaning of new glass, cans, etc. To optimize cleaning performance, additional blowing, ionization, or vibration bars are offered. The cleaning occurs in a continuous material flow. Blown-out particles are collected in drawers or optionally vacuumed. In addition to turning and cleaning, height differences can be overcome simultaneously. The...

... consumption. The air volume directed across the width shows a remarkable amplification rate of 20 to 25 times compared to the use of compressed air lines and compressed air blowing systems. Air amplification systems with conventional blowing holes only show a 4-fold increase in airflow, meaning only 1/5 of the capacity of the cold air curtain. A cold air curtain can be formed with device widths ranging from 150 mm to 900 mm. A typical application could be a cold air curtain between workers and heat, steam, or smoke. Likewise, the...

... the switching phase. This protects your network and prevents the fuse from blowing when you turn on your devices. Available Versions: - Alternating current (single-phase) or three-phase - Voltages from 115 V to 400 V - Installation in control cabinets or protective enclosures...

... requirements for cell size and distribution, as well as physical strength. Additionally, smooth, homogeneous product surfaces are achieved. For manufacturers of compact molded parts or semi-finished products, our chemical blowing agents are particularly beneficial. They are especially suitable for the efficient and cost-effective production of thick-walled functional parts. A density reduction of 25% or more is possible depending on the wall thickness of the part! At the same time, shrinkage and warping issues can be eliminated.

...Compact radial fan with high pressure for transporting fresh air for combustion in solid fuel boilers. Areas of application: Solid fuel boilers, heating devices Construction: The functional, compact housing is made of powder-coated, anti-static steel and can be installed in any position. The galvanized fan is designed for both extracting and blowing out contaminated air and is connected to the...

...e_07MS 431 m³/h |+250 mbar |-275 mbar | 4 kW IE3 3-phase The e_07MS model delivers a volumetric flow rate of 431 m³/h at a blowing pressure of +250 mbar and a suction pressure of -275 mbar. This machine operates at 4 kW with an IE3 3-phase motor. SKVTechnik provides you with side channel blowers manufactured in Europe, offering up to three years of warranty. All machines are designed for continuous operation 24/7 for both single-phase and three-phase power and are suitable for operation with frequency converters.

BEKUM Maschinenfabriken GmbH specializes in the development, manufacturing, and global distribution of high-performance blow molding machines for plastic packaging for liquid pharmaceutical, medical, agrochemical products, and food in mono- and multilayer from 3 ml to 3000 l. The product portfolio includes, among others, the following products: - EBLOW - HYBLOW - BM - BA - Automotive Technologie...

...Turbines and generators; Kaplan turbines; OSSBERGER flow-through turbines; planning, consulting, and construction of complete hydropower plants; chemical-free parts cleaning; water turbines; turbine controllers; rake cleaning machines; PRESSBLOWER spray-blowing machines; chemical-free industrial parts cleaning; dry cleaning; vibration cleaning; production of high-quality PP/PE hollow bodies; complete small hydropower plants for autonomous and parallel operation; water turbines; controllers for water turbines; rake cleaning machines...

...Delivery of products for fiber optic and glass fiber technology, such as patch cables, pigtails, adapters, patch panels, wall enclosures, and special products. Connector systems like SC, LC, FC, E-2000, ST, MU. Manufacturers such as Diamond, R&M, H&S, Euromicron, Senko. Planning of fiber optic networks. Installation of microduct systems. Laying and blowing in fiber optic cables. Assembly of fiber optic networks (splices, terminations, distributions). Splicing, OTDR measurements.

Forms for the glass industry: pressing molds, blowing molds, injection molds, centrifugal molds, etc. Consumer goods industry: tableware, gift items, objects, figures. Technical applications: glasses for the lighting industry, medical technology. Die-casting molds: household, electrical, consumer goods, and automotive supply industries. Model and single production: manufacturing of pre-series...

Machines and equipment for the glass industry; Machines and equipment for the glass industry; Blowing machines; Presses; Handling systems for goblet glass production; Cup production; Various pressed glass productions...

SIMCO electrostatic discharge, charging generators, repair of ionization devices, parts cleaning, dry blowing air gauges, Vortec compressed air for cooling, conveying, blowing, suction, control cabinet cooling.

Process consulting, prototypes, processing of CFRP, vacuum infusion, resin infusion or prepreg. Tube blowing process...

Glass blowing machines; Glass pressing machines...