bar turned parts Germany

... turned parts made of non-ferrous metal Metals or alloys without iron are referred to as non-ferrous metals (short: NE metals). This also includes brass, which we at HKR consider one of our core competencies. However, copper, zinc, or bronze also fall into this category. Due to their special coloration, these materials are also referred to as colored metals. CNC turned parts made of automatic steel...

...The equipment of the machines is tailored to the requirements of plastic processing. In the manufacturing area "CNC Turned Parts," components with a center distance of up to 800 mm and a turning diameter of up to 80 mm from bar stock, as well as a diameter of up to 400 mm from a chuck, are produced. The equipment of the machines is tailored to the requirements of plastic processing. They...

...and automotive for our customers. They are characterized by the highest quality and state-of-the-art manufacturing technology. Below you will find an overview of our advantages: - 9 CNC lathes from renowned machine manufacturers - Up to 7 axes in operation simultaneously - Bar parts up to Ø 40 mm - Chuck parts up to Ø 200 mm - Series parts from 50 to 100,000 pieces...

...We manufacture precise CNC turned parts with and without driven tools. Complete machining is also possible. Turning with and without driven tools Complete machining -Maximum bar diameter in mm: 65 -Chuck diameter in mm: 250 -Tolerances according to drawing -Batch sizes: from quantity 1 -All common materials according to drawing -Surface finishing by external suppliers...

...CNC turned parts in all batch sizes and every quality requirement. For turned parts, we consistently use highly flexible CNC-controlled turning centers. This enables efficient single and series production as well as complete machining of complex workpieces in a single setup. In our modern turned parts manufacturing, bar material can be machined up to a diameter of 30 mm. We can process insert...

...With our state-of-the-art CNC lathes, we can effortlessly manufacture complex CNC turned-milled parts up to Ø 60 mm from bar stock and up to Ø 120 mm as chuck turned parts. Years of experience in the CNC field enable us to produce even highly complex drawing parts with precision. Consistent product quality is ensured through our manufacturing-supporting quality management system (ISO 9001:2008).

... materials are primarily used for the manufacture of stainless steel turned parts: Material: 1.4301, 1.4305, 1.4307, 1.4401, 1.4404, 1.4571, 1.4021 Stainless steel parts can be turned up to a diameter of 680mm, sometimes also using robotic handling systems. Parts with a maximum diameter of 80mm can be processed directly from the bar. Complex parts with turning and milling operations are also possible!

...Modern CNC technology offers the highest level of precision and consistently high quality. On our lathes from the brands Gildemeister, Weiler, and GDW, we manufacture precision turned parts, as well as decorative turned and milled parts in single, small, medium, and large series from materials such as steel, stainless steel, and various non-ferrous metals. CNC Automatic Turning: • Bar diameter...

...With our CNC turning centers, we can fully process turned parts. We manufacture precise and complex turned parts as single or series components in high quality. CNC Turning In the CNC turning area, CNC lathes with a bar passage of up to 65mm, counter spindle, and multiple axes are available. This enables us to be well-equipped for the production of a wide variety of CNC turned parts.

...For over ten years, we have been manufacturing simple to complex turned parts on modern, technically advanced CNC lathes. For example, we can produce aluminum turned parts with a diameter of up to 380 mm. Additionally, we offer complete machining of parts ranging from 3 to 42 mm in diameter from bar stock, up to 300 mm in the chuck, and lengths of up to 635 mm. Our particular strength lies in small to medium batch sizes. Qualified employees, a lean organization, and consistently high quality lead to long-term customer satisfaction. Our clients come from a wide range of metalworking industries.

...We manufacture complex CNC turned parts with milling from bar stock. Machining | CNC Turned Parts | Flowdrill We manufacture complex CNC turned parts with milling from bar stock. Diameter d=8mm-80mm from the 3m bar Fully automated front and back machining Driven tools for milling and cross machining Quantity 1-1,000,000 Materials: Steel, stainless steel, aluminum, copper, brass, plastics...

...Materials: all common brass and aluminum alloys Dimensions: on curved and CNC-controlled lathes from bar stock in the diameter range of 3-65 mm chuck machining up to a diameter of 200 Quantities: small, medium, and large series Post-processing: turning, drilling, milling, sawing on appropriate post-processing machines Surfaces: ground surfaces as well as all galvanic and thermal post-treatments by external partners...

...The motto "Top quality at attractive prices" applies to us in the manufacturing area of turning & milling as well. Turning: We manufacture your turned parts on state-of-the-art machines with a maximum turning diameter of 320 mm and a maximum length of 650 mm. Maximum part weight: 25 kg Achievable accuracy: ±0.02 mm Milling: CNC milling: Here we process your workpieces up to a size of 1600 x 600 x 500 mm. Max. load 600 kg. 4-axis machining with high-pressure internal cooling at 20 bar. We process all common metallic materials as well as plastics, e.g., PP.

...Turned parts up to 50mm diameter from bar stock Turned parts up to 200mm in a chuck Conventional up to 300mm...

...SafeLock - Gripping Coupling / Quick Release for Grease Guns - made in Germany for safe and quick greasing with battery, manual, and pneumatic grease guns Description: MATO safeLOCK Hydraulic Safety Gripping Coupling - with turned and hardened gripping jaws - with high-performance hydraulic seal - with integrated linear swivel joint - with integrated check valve - with M10x1 thread Decoupling possible at over 600 bar back pressure no splashing during decoupling Outer diameter 15 mm (according to DIN) MADE IN GERMANY...

... and temperature, pressure via manometer - Pressure vessel made of specially coated special aluminum - Outer casing made of durable polyurethane - Housing cover made of stainless steel - Maintenance-free technology - Water drainage valve - Suitable for pressure compaction when the heating is turned off Scope of delivery - Compressed air hose - Water drainage hose - Item No.: D3428 (red housing...

...), CuZn37 (Ms63), … The following machining processes are carried out for you: - Machining of complex workpieces - CNC lathes with X and Z axes - Bar machining up to Ø 62 mm - Chuck turned parts up to Ø 250 mm - Pre-turning operations - Creating complex contours (internal and external) - Facing and longitudinal turning - Thread turning (metric, trapezoidal, Whitworth threads) - Creating fits up to 0.01 mm...

... provide solutions for our customers. Our purchasing department has contacts in global procurement markets - an additional advantage for you as a customer. Quality We have many years of experience in the precision manufacturing of turned and milled parts and are certified according to ISO 9001:2015. Quality is our absolute focus: That is why all processes are geared towards customer satisfaction...

... lathes for bar stock up to Ø 65 mm. CNC lathes for machining chuck parts up to Ø 200 mm (cross machining is possible up to approx. Ø 160 mm). Various CNC short and long lathes. Cam-controlled lathes up to Ø 60 mm. Band saw machines. For finishing operations, various machines and tools are available, such as cylindrical and surface grinding machines, thread rolling machines, burnishing and smoothing tools, various drilling and tapping machines, indexing table machines, band saw machines, and laser marking machines.

... the automotive and motorcycle tuning sectors. Our standard services include bar and chuck machining for high-precision turned parts with material diameters up to 42mm (bar) and 160mm (chuck), processing with counter spindles and driven tools, drilling and milling as single and series production on CNC milling machines using CAD/CAM programs, and aluminum die casting with a casting weight of up to 1.5kg. Furthermore, we take on turning and milling orders for small and large series in titanium and Inconel.

... companies from the automotive, medical technology, optics, hydraulics & pneumatics, sanitation, precision mechanics, and mechanical engineering sectors. Our clientele is spread across the entire country. We also deliver to neighboring countries of Germany in some cases. Our lathes are designed for processing bar materials. We are certified according to ISO 9001:2015 and ISO 14001:2015. Founded in 1965 - over 50 years of experience in turning technology makes us a strong partner for your company.

... of our 30 employees, ensure competitiveness in the industry and the achievement of our corporate goals. PRECISION TURNED PARTS - Chuck parts, short shafts - Ø 20 mm - Ø 900 mm, length 400 mm - Bar up to Ø 80 mm - CNC lathes of the latest design with driven tools (Mori Seiki) - Preferably application, heat-treated, and stainless steels - Highest accuracies (IT6) - Latest 3D CNC measuring device...

CNC Turning CNC – Contract manufacturing in the field of turning, whether from bar stock up to a diameter of 65 or in a chuck up to a diameter of 200, our modern machines are equipped for your tasks. Thanks to automation solutions like bar and portal loaders, your small series are in good hands with us. CNC Milling CNC – Contract manufacturing of drawing parts in the cubic area is one of our...

Production of turned parts up to Ø 75mm fully automated by bar feeders, production of chuck parts fully automated with robot supply, milling parts production up to approx. 200mm x 200mm x 200mm...

...":"","Blast Cabinet for Blasting with Glass or Ceramic Beads:":"","Table: 1460 mm > 510mm":"","Excenter Presses:":"","Max. Machining Diameter: 110mm":"","CNC Turret Lathe - Type QT 10 with Short Bar Loader:":"","CNC Linear Turret Lathe - Type QT 6G with Portal Loader for Machining the 2nd Side of Turned Parts:":"","Bar Diameter: 65mm":"","Y: 100mm":"","Travel Z: 510mm":"","Wire Diameter: 0.04...

... As a specialist in subtractive manufacturing, ZTS produces turned and milled parts from non-ferrous metals, quality and stainless steels, plastics, or highly alloyed special steels. Our production is geared towards small and medium series - thus flexible and open to all customer requests. Fast, on-time delivery, precisely machined parts, highest quality, and efficiency in production - these are the prerequisites for perfect collaboration.