special electric Germany

...Electric motors for high speed application (approx. 6.000 up to approx. 30.000min1) need to be designed with special concern for bearings, greasing and ventilation.

... with maximum accuracy due to the use of an integrated torque transducer and also an integrated angle sensor. During the tightening process, four different variables are measured and monitored: Torque - Angle - Time - Nº. of Impulses. Torque transducer measures directly and transmits the signals contactless. Detects cross threads, double hits, contamination, etc. Special feature to prevent cross threaded tightening: reversely rotating a bolt to a preset angle at the start of tightening. Combinations of buzzers and LED (Green / Red) for operator feedback on OK / NOK tightenings. [...]...

...Baking varnish is a special joining technology for sheet metal packages. After the individual lamellas have been cut, electrical steel with a baking varnish coating is baked into a sheet metal package in a two-stage temperature step. The result is a full-surface, solid connection between the individual sheets with complete insulation. Sheet metal packages manufactured in this way have high...

... It relieves both human and the environment, and also preserves the valuable cutting tool. The ability to cut close to walls is outstanding. Thanks to its electric drive, joint cutting in indoor spaces is also among the special strengths of the COMPACTCUT 401 E, which is also characterized by maneuverability, durability and outstanding operator ergonomics. Whether cutting asphalt, concrete, making separation cuts, demolition work, tight construction sites or joint cutting in buildings - the powerful electric joint cutter with a 400-volt motor delivers excellent results under all conditions.

... warning zone lights can revolutionize safety standards in your operation. Benefits of modern warning zone lights - Clear: Warning zone lights speak for themselves, the signal is immediately understandable - Universally applicable: Suitable for a variety of vehicles and machines across different industries. - User-friendly: Easy installation and operation without special training. - Adaptable: Various light patterns for different application needs.

We have long been the specialist for the highest quality standards and supply the following industries: machine, vehicle, plant, ship and aircraft construction, valve manufacturers, nuclear power and wind technology, medical and marine technology, aerospace, stair construction, furniture industry, metal and exhibition construction, electronics, climate technology, crafts and trade. We deliver our...

...Shut-off valves from the manufacturer Sigeval – available with DVGW, food, and ATEX approvals The Sigeval shut-off valves are available in various designs up to nominal size DN1200 at Ahrendt Industrial Valves. We have the valves in both flange-mounted design (LUG-Type) and wafer design (Wafer-Type) in common sizes and configurations in stock. The shut-off valve can be supplied with a manual lever, gearbox, as well as pneumatic or electric drive. Special designs available upon request.

... vacuum table with electric height adjustment and an "Alpha Compact" labeler from BLUHM/WEBER mounted on it. Together with a new machine control system these modules can be assembled into a fully automatic labeling line with which our customer can process products up to 43 cm in length at high speeds (up to 70 m/min). Our systems can be freely configured according to your needs. Tell us your...

...Melt pump for the production of HDPE / LDPE / LLDPE. Melt pumps of this type are used, among other things, in the production and processing of HDPE / LDPE / LLDPE. The EXTRU series is precisely tailored to the requirements of these processes and operates with the highest precision. Special gearing allows for a nearly pulsation-free delivery of the melt, ensuring consistently high product quality. Medium: Polymer melt, adhesive Actuation: with electric motor Start-up: self-priming Technology: external gear Application area: extrusion...

... Ultrasonic, Cleaning 2 with Ultrasonic, Rinsing, Preserving, Cleaning Process: Drying. Batch Holders swivel +/- 30° or rotate, Batch Holder. Special Equipment: Batch Holders swivel +/- 30° or rotate, Batch Holder Bath Maintenance: Electric Heating: L x W x H = 9600 x 3000 x 3400 mm...

...For every special individual case, whether due to the environment, size, desired performance, a specific medium, or other factors, we offer suitable electric air heaters. For media temperatures above 80°C, for example, we manufacture our electric air heaters with a separate terminal box, insulation, and external fan.

...Winch SB as a hoisting winch with special chassis construction including hand trolley and spool chain trolley...

...Self-Driving Pallet Truck with 1.5 Ton Load Capacity and Electro-Hydraulic Lifting Function Lightweight, self-driving pallet truck - agile even in tight spaces. Special Features HAJA EPT20-15 * Integrated charger (5 Ah) * Electro-hydraulic lift * Electric drive * Integrated Curti control * Tandem PU wheels...

...This rutile-basic coated special electrode is equipped with an electrically non-conductive and water-repellent protective coating for wet arc welding underwater. It is suitable for assembly and repair welding up to 20 meters water depth in offshore, harbor, shipbuilding, and steel water construction. High-quality weld seams require proper joint preparation, well-trained personnel, and adherence to generally accepted technical standards. Additional features: rod, coated, underwater welding...

...Submersible motors from oddesse are used as pump drive for applications with special requirements, such as in mining, utilisation of geothermal energy as well as in offshore and marine technology. EXECUTIONS - Three-phase asynchronous motors for 50 or 60 Hz and voltages up to 1,000 V - Water-filled motors with rewindable stators, dynamically balanced and with high resistance to thermal...

...We analyze, advise, and design compact electrical, electronic, and pneumatic control solutions for you. These include control cabinet construction and the implementation of your individual ideas. Whether it's press control, controls for handling wafers in clean rooms, special controls for gas shielded welding, axis control, or process control. A modern touchscreen interface is also possible. As a member of the Mitsubishi Electric Automation Network, you receive the latest technology from us, along with a product that is fully designed, assembled, tested, and documented.

... are located on the side of the cabin. Dust filters, elevators, separators, vacuum machines, grinding silos, and sandblasting containers can be mounted on the side or back of the cabin. It features a safety system in accordance with the Machinery Directive 2006/42/EC. A red light is mounted on the chamber as an optical signal for the blasting process. Door contacts automatically stop the blasting process when gates or doors are opened. Signal converters are pneumatic - electric for contact between the blasting vessel and the red light.

...Where telescopic covers cannot be used due to space constraints, especially for covering movable machine tool parts, link skirts can be employed. These cover systems, made from aluminum or steel profiles, rest directly on the guide rails and can hang loosely at the end of the rail without special guidance, be bolted, or rolled up. The rolling up is done like a window blind using spring or electric motors. GEKATEC delivers link skirts in all desired designs and dimensions at short notice. If needed, cutouts, openings, or drillings can also be incorporated at the factory.

...From the pencil to the welding machine, each of our employees uses their tools precisely and thoroughly. Being meticulous is a compliment to us. As a result, optimization and innovation almost happen naturally. In our most profitable business area, we produce: • Motor and generator housings for high-performance electric drive systems • Base frames, chassis, coolers, fans, stand housings, poles • Machine frames and other components for underground raw material extraction • Special and custom machines...

... steel flue for fire safety and a special heating boiler for increased demands. The integrated dual-fuel burner is capable of burning both oil and gas. With the installed tank heater, the internal safety oil tank system is maintained at temperature. This ensures reliable operation with heating oil under all temperature conditions and guarantees a smooth process. If the existing tank volume is insufficient, external oil tank systems can be connected.

...Electric heating mats of the types "DTCE" and "DTIK" are used for snow and ice removal from outdoor areas, such as driveways, ramps, bridges, stairs, etc. The installation takes place in the top concrete or cast asphalt layer. Installation under stone coverings is possible, provided that special criteria are observed. The control of an outdoor heating system is generally done with an ice detection device that monitors air humidity and ground temperature.

...Alternative drive energies – Green Logistics – are on everyone's lips. Machines are expected to be environmentally friendly and sustainable, even in the commercial vehicle sector. Terberg Special Vehicles is launching a new electric swap body converter with innovative EV technology. The performance of the new electric drive system is comparable to that of diesel engines and offers significantly...

... looking for tailored products for your problem. These features characterize the high-pressure cleaners produced by us in Lower Saxony: - SPS-controlled monitoring possible - Up to 6,000 liters per hour water output - Electric or gasoline-powered - Multi-pump systems on a single-pipe system...

... unlocking, the bollard automatically rises again. Mechanical bollards are particularly recommended: - Where there is no electricity (e.g., boathouse). - Where the bollards are moved infrequently. In all other cases, we recommend electric bollards, as they offer the greatest ease of use. Safety bollard...

VIREKA is a wholesaler for returned goods, surplus, and special items. A German family business with 14 years of industry experience. Do you want to sell your returned goods outside of Germany? Benefit from more efficient processes and cost advantages. Become our partner!

The BTR Group has been dealing with the issue of RWA (smoke and heat extraction) for several decades. Development, manufacturing, delivery, and service, especially for electromechanical RWA systems, make up the main part of our activities. We are also known for developing special solutions in the field of smoke extraction, whether electric, pyrotechnic, or pneumatic controls are required. An...

... – even on Sundays. However, our special focus lies in "logistical services." For this purpose, a specially ventilated department separated from the storage area has been established. This is an approximately 600 m² space that can easily be divided into smaller areas, some of which are designed as clean rooms. Currently, numerous employees are already engaged in carrying out repackaging and product...

...pneumatic and hydraulic parts, complete control cabinets, and control and regulation technology. Professional clearance of inventory, especially spare parts stocks. Distribution of hard-to-source machine parts from many renowned manufacturers. Global marketing of surplus and special items, as well as production surpluses.

... individually height-adjustable table systems, electric sit-stand computer workstations, mobile, stationary, and technology containers, office cabinets, as well as sideboards leave no wishes for special office solutions unfulfilled. Office furniture from PALMBERG is an absolute quality product, meticulously designed down to the last detail and durable in design. PALMBERG products are manufactured using consistently quality- and environmentally-conscious processes. Products from PALMBERG are low-emission and therefore carry the "Blauer Engel".

... was 630 million euros. NORD currently has its own subsidiaries in 36 countries worldwide. The dense sales and service network ensures optimal accessibility for short delivery times and a customer-oriented service offering. NORD produces a very diverse range of gearboxes for torque ratings from 10 Nm to over 242,000 Nm, supplies electric motors in the power range of 0.12 to 1,000 kW, and manufactures the necessary power electronics with frequency converters. Converter solutions are available for both classic installation in control cabinets and for decentralized and fully integrated drive units.