plastic tanks Germany

...We are looking for oil tanks for processing in bulk, in bales, or pre-shredded.

The Craemer Group Internationally oriented - regionally rooted The Craemer Group is an internationally active family business with core operations in metal forming, plastic processing, and tool manufacturing. The main plant is the Craemer GmbH, founded in 1912, located in Herzebrock-Clarholz, East Westphalia. In 2021, the group had around 1,000 employees and a total output of approximately 300 mi...

...Description: The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: 200 l drums, paint circulation and feeding, feeding of chemicals, solvents, acids and liquid soap * integrated muffler up to model size AODD 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & Benefits * high...

... (worm gears). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. The fixing of the traverse bridge is adjustable for...

...Form parts - Basins - Boxes - Tanks - Covers - Belt and chain protection...

...Our products serve in the following areas of application: Storage tanks (available in vertical and horizontal designs) Flat-bottom containers for non-potable water Standpipe containers Catch basins for industrial wastewater Linings Flow-through basins in galvanizing Standpipe containers Machine covers Transport containers for liquids of all kinds Plastic acid containers for industry FRP winding pipes (DN 500 – 3000 mm)...

...To check fill levels in fuel tanks, batteries, or tank systems, various measurement systems are used. One option is measuring with ultrasound. In this method, the measurement of signals occurs through frequency and resonance, usually with a metal probe. However, for certain applications, special media resistance is required, such as against battery acid. Our heat- and corrosion-resistant plastic...

...Made of impact-resistant plastic with a transparent and elastic surface to protect mobile input devices...

...Mobile Cleaning Equipment An ideal lance for washing long tanks and complex-shaped stirring blades. The "Automatic Hose Feed Lance" is a washing lance that vertically lowers the 3D nozzle from the tank top. It is effective for complex-shaped stirring blades and tanks with a long straight body, and it performs fully automatic washing of the inside of the tank. There are two types - suspension and hoist types - due to a difference in transportation method. <Application Examples> - Polymerization tank - Reactor tank, etc.

...• Small required space • Integration in injection molding machines, especially for in-mold-decoration • Easy installation on robots, linear axle and brackets • Separate 24V control of compressed air and CO2 • Liquid CO2 supply with CO2 cylinder bundles including dip tube or CO2 tanks • Short response time due to additional CO2 valve on the nozzle • Automated cleaning of injection molds, metal and plastic parts...

... individual plastic parts. In the field of water and laboratory technology, we provide technologically advanced solutions as well as prefabricated assemblies for the regeneration of resources such as energy, water, and heat. Product Examples Apparatus, tanks, gas scrubbers, ventilation systems, large filters, fittings, rainwater filters, distribution pipes, and much more. Advantages • Customized...

...PE, PVDF of all kinds - Pipeline installations on existing systems - Installations of pumps and measuring instruments - Basins and tanks of all kinds - Custom plastic construction of small parts and individual components to measure (liquid-tight with drain valve)...

...Leak indicators for typical heating oil consumer tank systems For steel containers with leak protection lining and double-walled plastic containers, each with a suction line for the leak indicator to the lowest point of the monitoring area.

...EuroBox Pallet Box GLT Grid Box Storage Box PolyBox PP Industrial Box Folding Box Plastic Boxes Transport Box Logistics Box Stacking Box Large Load Carrier Paloxen Technical Features Type: Dimensions approx: L 120 x cm W 80 cm x H 95 cm Internal Dimensions: L 116 x cm W 76 cm x H 79 cm Weight approx. 29 kg Condition: used Load Static 2500 kg Maximum Load Capacity 500 kg Operating Conditions Temperature Range -20 ° – + 40 ° C Cleaning (Washing) Temperature up to + 95 ° C Features Bottom: 3 Skids Color: gray or blue Material PP Side Wall Thickness approx. 11 mm...

...Our fuel lines ensure the safe transport of aggressive substances and allow for easy and time-saving installation thanks to matched connectors. All lines, smooth sections, cuffs and Quick connectors are made to customers specification and guarantee a reliable connection. The flexibility of our corrugated tubes provides a key advantage especially in tanks where space is limited. Depending on the...

...Whether large or small, round or square, for indoor or outdoor use: We manufacture containers precisely according to your specifications. We take into account various operational requirements such as medium, temperature, or load capacity, and consider the desired features. Most of our containers are constructed from welded plastic panels. Additionally, we also process spiral pipes or composite materials, depending on the requirements and application area.

...Fine Zinc Wire For Flame and Arc Spraying Zinc Coating Made from fine zinc (Special-High-Grade (SHG), Zn 99.995% "Z1", DIN EN 1179) Application: for active corrosion protection of metals for example, in cast iron pipes, gas tanks and gas bottles, wind turbines, and all metals outdoors, such as metal fences or bridges as a metal coating for, among others, plastic, film, or paper capacitors for...

...Banana Milkshake refined with a pinch of coconut and a handful of pistachios Mixing ratio: PG 15% / VG 80% / 5% H²O Ingredients: Propylene glycol (E1520), vegetable glycerin (VG E422), natural flavors, nature-identical flavors, nicotine (not in 0mg liquids) Bottle: 10ml PET plastic bottle, childproof cap, tamper-evident seal, optimized dropper for filling tanks Production: Made in Germany...

...We manufacture galvanic tanks with steel reinforcements from PPH gray and natural materials. At your request, we can use V4A or provide a complete plastic coating. Single or multi-chamber containers, also available with covers and suction systems upon request. Spray rinsing with nozzle bars and drains for complete emptying.

...Heating mat for IBC tanks to protect against frost! Keep your 1000 l tank frost-free, no matter how cold it gets. With our tank heating!

... the well-known Haase earth and basement tanks for heating oil, a variety of other fiberglass products are now manufactured. Fiberglass reinforced plastic is corrosion-free, shape-stable, aging-resistant, and completely odor-tight.

Tank and Container Construction with 50 Years of Experience We, Büenfeld GmbH, currently manufacture tanks and containers made of plastic in 3 production halls with 50 employees. We cater to various media, from oil to water and even chemicals, for example in electroplating. Depending on the application or requirements of our customers, we use both fiberglass reinforced plastic (FRP) and...

For over 50 years, we have specialized in the production of technical plastic parts using the blow molding process. We design your ideas and realize your plastic project according to your specifications. Alternatively, if you already have a tool, we can produce your individual blow part according to your requirements, even in small batch sizes. In addition to the pure manufacturing of your plastic part, we are also your reliable partner for further processing, assembly, and packaging. Milling, drilling, welding, filling, packaging, assembling into complete assemblies, and much more!

KKC has been manufacturing cases for industry, trade, and crafts since 1986. Today, 95% of the cases and container solutions are designed and produced specifically for customers. The product range includes lightweight and sturdy aluminum cases as well as custom plastic containers. KKC – Your Case Manufacturer in Germany Top quality is sustainably convincing. Today, KKC has become the leading...

... structural planning • Overhead line masts • Engineering offices for plastic technology • Engineering offices for vibration measurement technology With our products, services, and quality, we have become an internationally operating market leader in GFRP antenna cylinders and GFRP mobile communication masts.

... quantity with all requested load carriers. With the repair and recycling service from IPS, all load carriers made of wood, metal, and plastic can be restored or recycled. The rental system from IPS gives our customers the opportunity to rent load carriers for short or long periods without high financial risk. These services allow you to cover even short-term needs for load carriers. IPS Handels GmbH also produces all common loading equipment made of wood, plastic, and metal, thus always offering our customers the best conditions.

... producers and partnerships with other reconditioners, we can execute nearly all orders for our customers smoothly. Our wide range includes all common PE 1000 l liquid containers, pallets, and grid boxes, as well as special designs and custom-made products. For example, new plastic tanks, plastic IBCs rebottled (new container bladder and used grid), and cleaned/used IBCs are always available in larger quantities at short notice. We are also happy to take your used containers for compensation or carry out contract cleaning or contract rebottling for you.

...and aluminum. We plan, design, manufacture, and assemble plants, apparatus, tanks, pipelines, and custom solutions from different materials for chemical, pharmaceutical, nuclear, and food processing applications. Your ideas are our challenges – get in touch with us!

... Hungary. Since then, we have also been available as a contact for customers in Scandinavia. EURO-MATIC is one of the most versatile manufacturers of plastic hollow balls made from PP, PE, and PVDF. The plastic hollow balls are used as play balls in ball pits of play areas or indoor playgrounds, as well as for therapeutic purposes. In the industry, the balls are used as cover balls for galvanizing...

... engineering (e.g., agricultural machinery, construction machinery) to vehicle manufacturing, wind power plants, and the leisure industry (motorhomes, boat building, sports equipment, etc.). Product examples: - Tanks in all sizes and shapes for various applications: fresh and wastewater tanks, diesel tanks, rainwater tanks, small sewage treatment plants. - Form parts as cladding, covers...