resins Germany

...The aluminum foil has a matte finish and closely resembles the surface of spiral duct pipes. The adhesive is made from butyl rubber with special resins. Application area: For sealing joint connections in ventilation systems – even at low temperatures.

...Vinylester resins (VE resins) for hand laminating, winding, pultrusion, RTM, vacuum infusion for the production of chemical-resistant products, good adhesion to fiberglass.

...Riverstone® resins are low-viscosity 2-component synthetic resins based on MMA (methyl methacrylate). The resins can be used for the production of sheets, molded parts, tubs, troughs, heating elements, facade elements, TT plates, and much more. We supply Riverstone® resins in clear or colored formulations in buckets or barrels. Additionally, fillers and adhesive resins for bonding natural and artificial stone slabs can also be obtained from us. We supply large customers in 1-ton containers.

... developing the perfect film for your application. From the very beginning, your packaging machines will run at a constantly high frequency. For our film production, we only use high-quality resins from leading manufacturers. Any questions concerning our flat films? We look forward to your inquiry by mail or by phone: +49 (0)9181/2960-0! Flat film:straight edged rolls, colour on request...

...The coating with specially developed synthetic resins for this application provides the substrate with lasting protection against harmful influences.

...Piston dispensing systems are suitable for the shot-wise dispensing of 2K materials such as silicones, epoxy resins, or polyurethanes. A typical application for these systems is the casting of components. The piston dispensing systems are designed for processing 2K silicones, epoxy resins, or polyurethanes with or without fillers. The dispensing occurs in dosing shots. Depending on the required shot size and mixing ratio, different pairings of piston pumps can be selected. Optionally, containers in various sizes with stirring mechanisms or heating options are available.

...Non-adhesive sealing material made from expanded graphite with a perforated 0.1 mm thick stainless steel 1.4401 insert. Free from resins, impregnations, or other organic substances, thus also free from any potential toxic residual risks. Particularly suitable for hot water and steam at high temperatures up to 450°C. With internal flanging, it is also suitable for media in the food industry. Retains its physical properties throughout the entire application range.

... resistance, or create a pearled finish that makes objects easier to clean and reduces contamination. Paints and coatings generally consist of binders, fillers, pigments, solvents, resins, and perylene, as well as additives. These substances must be mixed together homogeneously during the production process. Various agitators are used to achieve this, for example dissolvers, depending on the process step and according to the boundary conditions.

...// Color confession Watercolors and paints are a mixture of the following main components (water, pigments, resins, amines, binders) At a pH value of 9.0 – 9.5, the mixture is optimal for printing. Heat or higher temperatures increase the tendency of amines to evaporate. This alters the composition, viscosity, and color fastness. Only with the correct pH value and temperature does a good...

...Metal adhesive, bonds similar and dissimilar metals and plastics (thermosetting resins like phenolic resin, melamine resin, epoxy resin, polyester) to metals, porcelain, stoneware, concrete, and wood (no thinner required). Properties: Yellowish/transparent mixture, paste-like, can be applied with a spatula or trowel, and can be shaped. Temperature resistance: -40° to +80° C.

... generally for any prints that need to be highly durable. They are used, for example, in the chemical industry, electronics, and the automotive industry. Resin-based thermal transfer ribbons are also applied to batteries for mobile phones, printer cartridges, or containers with solvents. Main properties and printing requirements Resin ribbons are made from synthetic resins. They were developed for smooth plastic surfaces, PP, PET...

... resins (polyurethanes, epoxies, etc.) and potting equipment, PRUFREX is a leader in the field of vacuum potting. When it comes to the safe protection of your electrical and electronic components, our state-of-the-art, automated manufacturing equipment meets all contemporary requirements. The use of specially adapted epoxy and polyurethane potting compounds ensures excellent potting characteristics and the best-possible impregnation of components and coils. These optimised potting compounds also contribute to optimal heat dissipation.

According to our motto "Nothing is impossible! We can handle all colors!" we have already satisfied hundreds of our customers. Special joints are also our specialty. - Joints at silage storage - Joints in wastewater treatment plants - Visible asphalt joints - Fire protection joints - and much more. Challenge us! With our powerful partners, we take on every challenge!

ADC-Beschichtungstechnik GmbH was founded in 1996 and has been active in building renovation since then. Initially, our location was in Berlin, where we primarily focused on facade renovation work and thermal insulation before relocating to Plauen/Vogtl. in 2004. Today, ADC-Beschichtungstechnik GmbH installs approximately 10,000 m² of Plastifloor acrylic resin floors per year across various indust...

...Entry-level model for processing small quantities of liquid resins made from polyurethane, epoxy, or silicone. Output ranges from 0.05 l/min to 3.5 l/min (depending on viscosity, mixing ratio, and hose lengths). Output: 0.05 to 3.5 l/min Viscosity range: up to 60,000 mPas Number of components: 1K or 2K Control: Siemens LOGO Container: various container sizes available from 0.6 l to 60 l Available options: Heating, material feed from manufacturer containers, material degassing/evacuation, mobile frame...

Troll Factory was founded in 2006 as a trading company for the areas of games and craft supplies. Since 2011, there has been a focus on mold making, which has led to the development of assortments for silicone rubber and alginates. As we not only trade in the products but also apply the various materials ourselves, test them, and produce our own series of molds, we have built up experience and kn...

...Plastifloor resins are used to manufacture industrial floors in commercial kitchens.

Jiangsu Kemaite Technology Development Co., Ltd was founded in 2005 in China. Our company mainly focuses on the development and manufacturing of shielding materials and films for the wire, cable, automotive, logistics, laboratory technology, as well as the construction and aerospace industries. Our new products for high-performance electronics (epoxy resins and silicones) and protective tapes for...

...Highly effective cleaning spray based on citrus peel extracts, effortlessly removes adhesive residues, oils, fats, resins and tar, lubricants, rubber residues and abrasions, ballpoint pen marks, etc. Highly effective cleaning spray based on citrus peel extracts, effortlessly removes adhesive residues, oils, fats, resins and tar, lubricants, rubber residues and abrasions, pencil, ballpoint pen, and felt-tip pen stains.

...Technical Glycerin (1,2,3-Propanetriol, 1,2,3-Trihydroxypropane) GLACONCHEMIE produces technical glycerin under the name Glycatec®. The chemical and automotive industries use Glycatec® among other things as a starting component in plastic production (alkyd resins), for the manufacture of polyurethane foams, and as an antifreeze in engine cooling.

... distributed load. The tool cabinet is delivered fully assembled. Door opening angle: 180°. Features of visibility storage boxes: Visibility storage boxes made of high-quality polypropylene (PP). With cutout for labeling tab. Also suitable for heavy loads, thanks to stabilization tab. Ideal for slot plate systems. Break and shape stable. Resistant to fats, resins, alkalis, oils, and acids. Food-safe...

Eco-friendly and custom-printed packaging made from paper, cardboard, and other materials for delivery services and takeaways. We offer you a complete package up to the shopping bag, including storage and logistics. For 30 years, we have been a competent partner from Dresden in Saxony when it comes to packaging. We supply products for a wide range of industries and applications, utilizing various...

...INOX automatic transmission protection reduces friction and prolongs service life of seals and sealing rings. This results in a smoother switching of gears. INOX automatic gearbox protection delays the renewed deposition of resins and similar soilings. item number:1451500 packing:250 ml...

...) Bending resistance of 130–260 MPa (with reinforcing mesh) Impact resistance of 45–95 KJ/m² Reinforcing materials: Continuous or cut glass fibre mats, fleece Mesh Non-crimp fabrics Special formulations and versions Styrene-reduced, environmentally friendly formulations Low-viscosity injection resins with reduced exothermic peak Formulations for the...

... dietary food, it is recommended as a base for ointments. In cosmetics, it is frequently used for soap production as a re-fatting agent in bath oils and shower gels as a skin oil as a care oil for the eye area Organic safflower oil also finds numerous applications in technology as a substitute for linseed oil in linoleum production for paint and varnish production (safflower oil films do not yellow with age) for alkyd resins as house paint and for printing inks as fuel oil for margarine production as a lubricant . CAS:8001-23-8 EINECS:232-276-5...

...SafeGreen® Cold Degreaser & Wax Remover are effective solvents for removing resins, waxes, fats, and oils.

... start-up time is reduced by providing full power directly after switching on. This enables high-speed production with significantly lower cost per module, resulting in an unsurpassed value for money. Alternatively, the machine can also be equipped with UV discharge lamps or heating units. Diverse nozzle plates are available for the different module tape pitches. Thermal curing resins such as black epoxy can be processed optionally. Reliable process stations and automated inline quality control ensure highest quality at a minimum of cost per module. High-speed chip module encapsulation...

... irritations in the surface texture that can occur with the use of unsuitable systems. TensorGrip A70 does not interfere with the curing of vinyl ester, polyester, or styrene resins and ultimately becomes part of the matrix. TensorGrip A70 has been specifically designed for the aerospace sector. TensorGrip A70 can also be used as a general-purpose adhesive. EAN:4260534181279 ml:500...

...For optimal protection against de-icing salts, dripping engine and transmission oils, or other harmful substances, the surface protection systems specifically developed for each area are suitable. These also counteract the sometimes very high mechanical stresses caused by continuous driving operations. Specially developed reactive resins provide an economical, quick, and practical solution for renovations and repairs in small areas.

... suitable for all common applications of these resins, such as floor coatings, the production of laminates, coatings, cast parts, and polymer concrete. This color range is intentionally based on pure pigment mixtures that do not contain any often disruptive binders, allowing for very strong color intensity. Our synthetic resin colors are highly concentrated with optimal pigment volume adjustment, enabling the most economical coloring with easy handling.