gas storage systems Germany

...Gas cylinders for technical gases...

...into canisters. The liquids are supplied from storage tanks by gravity or pumps. ■ a calibratable filling, both above and below surface ■ quick cleaning of the valves (the product-contact area consists of 3 parts) ■ rapid adjustment to different container sizes and changing products ■ easy operation by one person ■ immediately ready for use: just connect power (electricity and/or compressed air) and product supply, and the filling can be started.

...The device depth is partially under 20 cm. Therefore, they can be easily installed in the bathroom, kitchen, hallway, or a storage room. A second heat exchanger heats water for the respective draw-off points in the kitchen and bathroom using a continuous flow method. Since only short pipes are required to the draw-off points, distribution losses are also low. A sliding control ensures energy-saving operation. A chimney can be omitted if the device is installed in the attic. Here, a flue gas connection is sufficient.

... liters each or 8 compressed gas cylinders of 10 liters each — Maximum fire resistance of 90 minutes or 30 minutes (depending on the model) — Tested and certified according to GS testing principles Function / Construction: — Outer body made of powder-coated fine steel sheet — Doors lockable with profile cylinder (suitable for locking systems) — Integrated leveling feet to compensate for uneven...

...Heating center in container 6 x 2.50m available for rent or purchase - 75 kW - 200 liters hot water storage - Connections available on the right and left sides of the container - Gas inlet available - Currently set up for liquid gas, can be easily converted to natural gas - Exhaust pipe for roof The heating container has only been used for a short time and is in very good condition. All installations were carried out and inspected by a professional company. The container is ready for immediate use.

...Magnetically Coupled Unlike standard pumps, these products feature a contactless magnetic coupling. An oil leak from a wear-prone conventional shaft seal is excluded in these models. Applications * - Installation in analytical devices * - Installation in flywheel energy storage systems * - Gas technology Customer Benefits * - Space-saving and ideal for system integration * - High suction...

... storage sensor) - Ideal for combination with other heating systems such as solar systems or biomass boilers - Burner with a wide modulation range for optimal adaptation to energy demand - Aluminum/copper heat exchanger for robust, safe operation - Efficiency 101 – 108.5 % - With high-efficiency circulation pump...

...These are wet paint or electrostatic powder coating curing ovens used in automatic systems. They operate continuously. They can be configured as gas, diesel, or electric ovens. They are space-saving, mounted on a high chassis on the floor, and the floor is suitable for a variety of storage areas. The entrance and exit of the oven can be on the same side or on different sides of the oven. The...

...Space-saving and efficient! With an integrated drinking water tank in the buffer storage and 1 smooth tube heat exchanger. Storage for combining multiple heating systems. The variety of connections allows for unrestricted use of the buffer storage. Whether for water-bearing fireplace inserts, water-bearing stoves, oil boilers, gas boilers, or other energy sources. It is particularly suitable for...

...• Development, manufacturing, and installation of gas technology systems • Planning and installation of pipelines for technical gases, laboratory gases, compressed air, vacuum, water, as well as exhaust and flue gas systems • Production of pressure vessels and apparatuses (e.g., gas humidifiers, gas heaters, storage tanks, and heat exchangers)...

... arrangement ACCESSORIES on demand level indicators condensate drainage systems sump heating GENERAL & FUNCTION The condensate tank type VKAB collects liquids and condensates, which are generated during the cleaning of gas in liquid separators. The condensates are discharged from the separators into the tank and serve for pressureless intermediate storage. The design is carried out as a steel welded construction in a horizontal design and is designed as a pressure vessel with 3 bar. QUALITY MANAGEMENT DIN EN ISO 9001 certified...

... components made of stainless steel • Fast format adjustment • Gas pressure spring-loaded protective doors made from Makrolon • PLC control Additional devices: • Hot glue seal • Combined hot glue and plug closure • Special plug lock • Cardboard storage tapes with automatic magazine loading • Embossed printer for signing a flap • Coding (inkjet / laser), blind embossing • Code reader with or without folding box ejection device • Equalization for powdery or granulated products • Upper runner to support the insert easily deformable products • Inserts for brochures booklets, spoons etc.

...CLASSICtherm natural stone slabs operate very efficiently and economically. Many cost factors that you would encounter with conventional systems are completely eliminated with CLASSICtherm natural stone slabs. You do not need tanks or storage, no oil or gas burners, and no special piping. You avoid follow-up costs such as inspections, maintenance, or chimney sweeping.

... projects focus on quiet wind turbines that complement solar energy perfectly, enabling everyone to cover 100% of their electricity needs with renewable energies. We strive to make Germany completely independent from foreign oil and gas companies while protecting both people and the environment. We stand by our name; help shape Germany's future with us! Solar storage systems Solar installations Solar systems Photovoltaics Solar roof...

Wholesaler of solar modules, inverters, mounting systems, monitoring devices, storage systems, heat pumps, as well as wind turbines, optical transceivers, and laser systems...

SCE-SunTec UG stands for quality, reliability, and punctuality. We plan, deliver, install PV systems and storage systems, and put them into operation. Everything from a single source!

Energy generation, photovoltaic systems, planning and installation of solar power systems, storage systems, assembly, service, cleaning, expert assessments, yield evaluation, inspections, trading...

Manufacturer of pellet heating systems, pellet storage systems, conveyor screws, suction systems, mole.

Service for storage systems. We offer expert service for storage lifts and carousel shelves from nearly all manufacturers: maintenance, repairs, spare parts, retrofitting, controls, and much more.

... Mainsite Technologies GmbH, we create the conditions for efficient, innovative, and cost-effective product solutions. Top quality is our standard. Main areas of application: General mechanical engineering (compressors / oil preheating / compressed air / water-glycol), oil and gas processing (Joule Thompson / hydraulics), storage and processing of flammable substances (space heating), petrochemicals...

Reliability and punctuality are a matter of course for us. Whether heating gas, bottled gas, or autogas, we are always your competent and reliable partner for all matters related to liquefied gas. With our large storage capacities, we are independent of supply shortages in the procurement market and can provide our customers with liquefied gas deliveries at short notice (even on weekends and...

... to Leipzig/Halle Airport. We have over 65 years of experience in the manufacturing and design of process engineering equipment, heat exchangers, and pressure and storage vessels. An important focus of our production is the manufacture of pressure and vacuum autoclaves with quick-release closures for heat treatment, melting, casting, and drying processes. Our range of services particularly includes the design, manufacturing, and assembly, system deliveries, and quality assurance of customer-specific, turnkey systems.

... well as the oil and gas industry. We also develop customized solutions for our customers' systems/products. All our products meet the latest technical standards and safety requirements. With a global network of representatives, we provide our customers with expert advice on-site. We train both our customers and maintenance partners in the maintenance of our valves to ensure a long lifespan and reliable function of our products.

... ensured. These trainings are conducted, for example, at TÜV, with suppliers, or in-house. A consistently high safety standard is maintained through certifications as a specialist company according to the Water Resources Act, waste disposal specialist, and repair company according to §54 Measurement and Calibration Ordinance. A dedicated suction pressure cleaning vehicle and a dedicated tank storage facility for hazardous waste ensure flexibility in tank cleaning. The necessary electrical installations for the systems are also implemented directly.

... customized energy storage and generation systems for specific requirements. Our various technology solutions: Flywheel storage, CEAS (compressed air storage), and battery storage as well as turbine generators, even in combinations. The decisive advantage is our modular concept. From 3 kW to several megawatts. By combining different technology solutions, we can address every application and...

...However, compared to conventional automobiles, electric vehicles still cannot carry a comparable amount of energy with today's energy storage systems, resulting in a shorter range. In recent years, electric cars have gained renewed attention. Battery technology has advanced, for example, due to the demands of portable electronic devices, achieving higher energy densities, faster charging, and...

... gases is just as important to us as the compression, storage, and transport of H2. Our scope of work covers sector coupling in the areas of electricity, heat, gas, mobility, and industry. Combined heat and power generation for combined heat and power plants, biomass power plants, wood gasification plants, pyrolysis plants, waste heat utilization through ORC systems, and biogas reforming are also part...

...Apollo Gößnitz GmbH develops and manufactures pumps and pumping systems, plate heat exchangers, plate evaporators, and thermal systems, specifically high-quality heavy process pumps according to API 610 and system solutions for oil & gas applications, offshore use, as well as for chemical and energy technology. The areas of application are found in the industries of refining, gas processing...

... - Distillation - Dosing units - Drying - Extraction - Evaporation - Fixed-bed reactors - Filtration - Fluidized bed reactors - Fuel cell test stands - Tube furnaces - Gas treatment - Stirred reactors - Humidification - Metal-free units - Mixers - Polymerization reactors - Precipitation - Reactive distillation - Rectification - Special reactors - Storage containers...

... work, as does innovative and service-oriented action. We support you from the beginning to the end throughout the entire lifecycle of a machine/system. We only consider our goal achieved when we are firmly convinced that we have developed the best innovation for you. Take us at our word and challenge us! - Flame lamination systems; - Flame lamination; - Lamination machines; - Adhesive lamination machine; - Textile machines; - Winders; - Goods foam machines; - Gas burners; - Tension frames; - Low-tension goods storage; - Unpacking mattresses; - Cutting remnants from mattresses.