wood material grinding Germany

...For softwood floors with significant knot inclusions, the SUPERHUMMEL, with the optionally available red sanding drum, ensures an even material removal. Three-phase alternating current motor: 400 V / 4.0 kW Power supply protection: at least 16 A Sanding drum width: 300 mm Sanding drum speed: approx. 2400 rpm Sanding belt dimensions: 300 x 800 mm Machine weight: 87 kg...

...Our experts manufacture various wood specimens from common wood grades. During production, we attach great importance to using wood that is free of cracks and knots. We also pay attention to the annual ring position of the wood when selecting the material. Do you wish to order further processing by grinding or drilling? Then this is the right place. Further types of wood:available upon request Wooden boards:According to EN 205, EN 304 (beech) According to EN 927 (pine and spruce) Consumables:such as stirring rods...

... material used for flap grinding wheels. The significant difference lies in the highly elastic surface of the profile sanding wheel FAPI-SW. This is achieved with individual, disconnected slitted, abrasive cloth packages separated by a large distance to one another and fastened to the wheel hub.

... field, we have large storage capacities that enable us to supply even large power plants. Process Optimization Perfectly tailored to the individual systems, we can screen the material to various grain sizes or mix in additional types of wood. Contact us for more information on moisture content and grain size! Variations in composition and size are production-related and do not constitute a defect.

...fats, diluted acids, and alkalis, high stability, good elasticity; very high density 1.25 - 1.5 g/cm³; Thickness: 0.5 - 2.0 mm Applications: Carrier material for abrasives on backing (e.g., grinding discs); punched parts for mechanical applications; deep-drawn components (e.g., suitcase shells, welding masks); electrical insulation material; punched parts for seals; separating film for the production of polyester laminates; carrier for continuous laminates; carrier for plastic decors based on melamine resin; support layer for real wood veneers and deep-drawn surfaces; knife handles...

... hole patterns Available diameters: 75 mm – 225 mm Grain: Corundum Materials: Steel, stainless steel, aluminum, and other metal surfaces Wood and wood-based materials Paint and lacquer surfaces Plastics and composite materials Putty and plaster surfaces For more information, visit our website.

...Towards Zero Emission with Microfibers The performance of the filtering separator is primarily determined by the potential of the filter material. With microvel®, we are taking another step towards "zero emission." By using the finest microfibers, this product line is breaking new ground in separation dimensions. The wide range of applications extends from the wood industry to grinding, drying, and furnace processes in the chemical and cement sectors, as well as combustion and power plant operations.

... wood-based panels. Characteristics, Function Material is fed vertically from above The gravity sifter "Cleanomat" separates heavy contaminants from the feed material Flat steel hammers rotating at high speed split the feed material into flakes Stationary impact elements support the size reduction process and relieve the screens The perforation of the screens determines the size of the flakes The symmetrically designed machine housing allows operation of the mill in both directions Rotating flat steel hammers can swing back when large foreign objects penetrate into the grinding...

... connections, compact discs, fine grinding discs, satin finishing belts, and rollers. Abrasive non-wovens are waterproof synthetic fibers with abrasive grain and resin that are interconnected. Another important property of the "three-dimensional abrasive" is its spring effect.

... • Electronic components, e.g., circuit boards Miniature brushes are available in various designs as round, cup, and brush brushes. Available shaft diameters are 3 mm, 2.34 mm, and 3.17 mm. The typical bristle materials are steel wire, stainless wire, brass wire, or grinding bristles. Diamond bristles available upon request. Stainless brushes Further information on brushing stainless materials can be found at www.lessmann.com Note: Brushes with bristle material such as bristle/goat hair achieve an ideal result with polishing paste.

... to the workpiece, even in untrained hands. The chemical strippers used pose a significant risk to health and the environment. Traditionally known sandblasting must be completely avoided, as the excessively high working pressure and the required amount of blasting material not only clean the surface but also significantly wear down the wood. Our solution for you: Fine sandblasting process using low pressure.

... making the recycling sector more economical with innovative concepts. ARJES offers you a wide range of solutions for classifying pre-shredded material in the fields of wood, waste, and metal processing. By employing various screening techniques, we are able to precisely tailor specific requirements regarding throughput capacity, fraction size, and material type. In addition, we also take care of...

... presses, wood presses, powder presses, brake pad presses, friction material presses, grinding wheel presses, special constructions / special machines, automation technology, engineering and project studies. Production spectrum: Laboratory presses - multi-station systems - complex production systems, pressing forces from 0.1 kN to 100,000 kN, heating plate sizes up to 5,000 mm x 3,000 mm...

...electroplating, plastic coatings - Prototype construction, sample parts, custom manufacturing, series production - Material procurement - Development, consulting, and service 2. We process the following materials: - Metals (aluminum, steel, stainless steel, brass, titanium, silver, copper, special metals, etc.) - Plastics (Makrolon, Plexiglas, Rulon, Vespel, Teflon, s-green, ECTFE, PA, PBT, PC, PCTFE, PE...

Experience, competence, quality, and service in plant engineering The many years of experience in bulk material technology enable the implementation of newly developed manufacturing processes in existing and newly designed plant engineering. We are your partner from planning, manufacturing to assembly and commissioning of plants for bulk materials for: STORAGE - GRINDING - CONVEYING - DOSING AND...

... applications. Even in challenging areas, such as on curves, laser marking or laser engraving can achieve excellent results. The company Laserprint offers innovative solutions for the permanent marking of products using laser marking or laser engraving. Whether metal, plastic, glass, or wood, there is hardly a material that cannot be marked with "Lasermarking". Technology of laser marking / laser...

...) Stainless steel, steel - CNC Laser Cutting (Steel up to 20mm, Stainless steel up to 15mm, Aluminum up to 10mm, Pipes up to Ø300mm) Special materials such as brass, wood, plastics, and very small holes in thick material - CNC Bending (maximum bending length up to 4000mm, depending on sheet thickness) - Water Jet Cutting 2D and 3D - CNC Punching/Notching - CNC Pressing - Rolling, Drilling, Countersinking, Reaming, Tapping, Sawing, Grinding, Satin Finishing...

... flexibility in order processing. With our hardening shop, we guarantee the best quality from a single source. From the initial cutting of the raw material to heat and surface treatment, all the way to the ready-to-use product, everything is produced in-house. The company Carl August Hüchelbach was founded in 1904 and has been passed down from generation to generation. In 1999, a transformation of the legal form into a GmbH & Co. KG was carried out. Our company philosophy is as simple as it is self-evident: Always only the best for our customers.

... traditional building materials such as Tadelakt, bismuth, sgraffito, casein paints, and lime plaster just as excellently as they create unique surface textures with lacquer, liquid metal, grinding lacquer, and tempera paints. Material imitations of marble and wood are produced at Texturwerk through imitation techniques. These marbling and graining techniques are particularly suitable for the aesthetic enhancement of unsightly columns and support elements. With a keen sense of colors and surfaces, the team at Texturwerk transforms simple spaces into exclusive and unique interior designs.