zinc and alloys Germany

...Zinc alloys available as drum and frame goods up to 3m in length Passivations (Cr6-free) available in blue, transparent, and black Load-bearing and effective. See for yourself our core competencies: Zinc-iron coating / Zinc-nickel coating with various post-treatments. Zinc-nickel coatings are a more effective alternative to zinc-iron layers in the field of cathodic corrosion protection on steel...

...Die-casting, die-casting molds, die-casting tools, die-cast parts, die-cast parts made of zinc and zinc alloys, die-cast parts from zinc alloys, die-casting with zinc, die-casting parts, die-cast parts made of magnesium, magnesium die-casting, magnesium die-cast, magnesium die-cast parts, aluminum die-casting, aluminum die-cast parts, aluminum die-casting, zinc die-casting, zinc die-cast, zinc die-cast parts, zinc die-cast parts, zinc die-casting, magnesium die-casting, aluminum die-casting. German quality, German communication, Chinese price, Chinese speed, best service = Runbond Mould...

...Syncarb Z2e² - High Durability and Energy Efficiency Introduction Syncarb Z2e² is a clay-bonded crucible with a high-quality content of silicon carbide and graphite, produced using an advanced isostatic pressing process. Syncarb Z2e² exhibits excellent performance characteristics throughout its operating temperature range for aluminum and zinc alloys in melting and holding applications for use...

...We trade in non-ferrous metals Trade in non-ferrous metals Our strengths... • over 100 years of tradition • competent, trained professionals • large metal warehouse • own fleet • modern equipment • successful quality management system • certification as a waste disposal specialist In our own smelting plant, copper, lead, and zinc alloys were also produced until 1980. Our goal is to ensure a reliable supply for our customers, who further process non-ferrous metals into high-quality products.

...For hand, centrifugal, and pressure casting processes in any composition, including with bismuth or other alloying elements. Also lead-free. Available in blocks and rods.

...Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ZAMAK INGOT Zamak alloys were developed for the first time in the United States in 1929. The word Zamak comes from the German acronym and represents the elements it is made of: Z for Zink, zinc, A for Aluminum, aluminum, MA for Magnesium, magnesium, and K for Kupfer, copper. At its very beginning, Zamak was used just for decorative applications; later, the strength of this material determined its success in many other productions. ...

... available in the form of injection molded test specimens. Aluminum 6016 (with a thickness of 1.25 mm) Sheet steel grades DC06, DC04_HX420LAD+Z and DP600 Z140 on stock, further grades upon request Galvanized standard quality DX54D+Z100, DX54D+ Z140, DC04ZE50/50, DC04ZE75/75 (with a thickness of 0.8 mm); other grades upon request Higher-strength grades DP600+Z140 and HX420LAD+Z Die-cast aluminum, magnesium and zinc in various alloys Various steel or aluminum grades dimensioned for the impact test in accordance with ISO 11343 Laminated safety glass (LSG) and tempered safety glass (TSG) ...

...Zinc-containing bronze alloys, such as red brass, are made from the metals copper and zinc, and may also contain tin, lead, and nickel. The color spectrum ranges from gold-red (high copper content) to a light yellow (high zinc content). The common alloys have a maximum zinc content of 45 percent and are considered particularly resistant to cavitation and wear. Their excellent emergency running and sliding properties also make red brass frequently used in hydraulic systems – for example, in sliding bearings, shells, bushings, or gears.

...steel, zinc plated*threaded M 10*Ø 12 mm...

..."The zinc-nickel process has developed in recent years into a process providing one of the most efficient coatings in surface refinement, and is primarily used where high corrosion resistance at a high temperature load is required. Zinc-nickel alloys with 12-16% nickel content are very temperature-resistant, the higher level of hardness compared to the normal zinc coatings is also a very...

...Recycling and Trading of Non-Ferrous Metals such as copper, brass, red brass, bronze, aluminum and its alloys, magnesium, lead, zinc, and tin. As the value of these metals is subject to significant fluctuations on the stock market, we continuously monitor the current prices and take this into account in both purchasing and selling. Through proper processing, they can be reused almost indefinitely as secondary raw materials.

...Nickel coatings are primarily used on iron, zinc, copper, and their alloys. Bright nickel coatings have a hardness of 200-400 HV 0.1.

...-white appearance. The deposited pure tin layers are lead-free, thus complying with the directive 2002/95/EC (RoHS) of the electrical and electronic industry, as well as the EU End-of-Life Vehicle Directive. Steel and copper parts are directly tinned. For zinc-containing alloys, a nickel or copper interlayer must be applied before tinning. In the case of direct tinning, zinc would gradually diffuse into the tin layer, significantly altering its properties (whisker formation).

...{"Non-Ferrous Metals":["Aluminum","Aluminum Bronze","Bronze","Gray Cast Iron/Spheroidal Graphite Iron","Copper","Copper-Nickel Alloy","Magnesium Alloys","Brass","Nickel Silver","Nickel Alloy","Low-Alloy Copper Alloy","Red Brass","Special Brass","Special Materials (White Metal, Titanium, Tantalum, Zinc)"],"Steel":["Austenitic Steel","Carbon Steel","Stainless Steel","Tool Steel","Fine Grain...

... turned parts made of non-ferrous metal Metals or alloys without iron are referred to as non-ferrous metals (short: NE metals). This also includes brass, which we at HKR consider one of our core competencies. However, copper, zinc, or bronze also fall into this category. Due to their special coloration, these materials are also referred to as colored metals. CNC turned parts made of automatic steel...

...Surface protection plays a crucial role in metal processing and usage. In addition to corrosion protection against external influences, the external appearance of the product is also enhanced. Here, BCK employs various technologies to achieve the desired result: galvanizing with zinc or zinc alloys, powder coatings, KTL priming, protective films, or painting of the respective component or workpiece.

... quality control to meet our own standards. - manual - mechanical - automated - stationary - mobile MATERIALS & ALLOYS WE PROCESS We process a wide variety of components and products made from countless materials and alloys. Here is a "small" selection: - brass - aluminum - copper - stainless steel - steel - zinc - die casting - aluminum die casting - special alloys - and wood - and many more...

...The most well-known copper alloys are brass (copper-zinc), bronze (copper-tin), copper-nickel, and nickel silver (copper-nickel-zinc). Copper and copper alloys form a central foundation of modern life. They provide us with electricity and clean water, and they make a significant contribution to sustainable development. For centuries, copper has been intertwined with the history of human progress. Its important functions are evident in our homes, in transportation, in industry – essentially throughout the entire infrastructure.

...Made from lead, lead alloys, tin, and zinc. Extruded as plates (smooth/profiled), pipes, billets, or solid anodes. Available upon request with suspension, drilling(s), and steel or copper core. Surface Finishing For use in electroplating baths, we offer anodes made of tin or zinc; and lead and lead alloy anodes for use in chrome baths. We produce our anodes as plates, pipes, billets, or solid...

At the forefront of the galvanizing market! Dipl. Ing. Herwig GmbH is one of the leading providers of chemicals and zinc alloys for the galvanizing industry worldwide. Dipl. Ing. Herwig GmbH is one of the leading providers of chemicals and zinc alloys for the galvanizing industry worldwide. Personal market activities ensure a current state of development and a high level of problem-solving expertise with the highest quality requirements. We are constantly developing new products, planning and building galvanizing plants, and holding patents. We distribute and recycle chemicals worldwide.

Frankenberg - Metallrecycling GmbH is a traditional family business that has been specializing for over 60 years in the disposal, recovery, and processing of electronic waste and non-ferrous metals such as aluminum, brass, copper, zinc, lead, tin, etc. In addition to our metal trading activities, we specialize in the recycling of zinc die-cast scrap, runners, chips, dust, etc. Whether for trading or processing, we offer professional solutions. In suitable cases, we process scrap and return zinc blocks based on the raw material.

TRAF ZN Corporation is one of the leading firms in the manufacturing and trading of high-quality zinc alloys (zinc ingots, zamak ingots) and copper scrap.

We specialize in die casting from fine zinc alloys and have a vast experience potential in this field. Upon request, we provide our expertise during your product development. This means professional and technical design of cast parts, as well as optimal and cost-effective tool manufacturing. Discretion is a matter of course for us as a customer foundry in all phases. With a workforce of...

... casting all pourable aluminum and zinc alloys. Currently, we have about 15 alloys in our program such as Magsimal 59, Unifont 94, Silafont 36, AlMg5Si2Mn, AlZn10Si8Mg, AlSi9MgMn, etc. We work with the vacuum die-casting process to minimize gas porosity.

In our company, only zinc alloys are cast in 11 hot chamber die casting machines. Our preferred alloy is known under the trade name Z410, with 4% copper and 1% aluminum being the main alloying components. The chemical designation of this alloy is: ZnAl4Cu1. In our in-house mold construction, our mold makers work with state-of-the-art CAD systems. We manufacture the molds and mold inserts here in...

... optimal results. The high quality standard of our products is achieved through the use of state-of-the-art zinc die-casting machines. Computer-controlled systems process high-quality zinc alloys using the hot chamber method. Innovative two-chamber furnaces ensure that only minimal fluctuations occur in the temperature range and in the metal bath level. The operation and monitoring of our machines are...

... parts made from steel, iron, aluminum, magnesium, copper, zinc, tin, nickel, and cobalt alloys, manufacture your prototypes, and also manage your projects all the way to series production. Furthermore, we are capable of printing foundry and deep-drawing models from sand and processing them further to enable small series production. Other applications for printed sand molds are also possible. Please contact us if you have any questions about this.

Die-cast parts made from fine zinc alloys, injection molded parts from thermoplastic materials, in-house mold and tool construction, mechanical finishing, assembly of components, surface finishing engineering, mold and tool construction, fixture construction, zinc die casting, injection molding from thermoplastic materials, mechanical processing, surface finishing, assembly of components.

...machining, surface treatment, and assembly of complete assemblies are core business areas for Monse. Thus, not only is the finished part itself 'cast in one piece' – the entire development, design, and manufacturing process flows seamlessly as well. Clients come from a wide range of industries, including automotive, household appliances, construction, and electrical engineering. The machinery and equipment manufacturing sectors, as well as medical and communication technology, have also long recognized the advantages of zinc die casting.

... such as copper, chrome, nickel, titanium, beryllium, zirconia, manganese, zinc, tin, magnesium, silica, lead and/or bismuth and iron are smelted to form diverse wrought aluminium alloys in two tiltable 50 tonne channel induction furnaces, strictly in accordance with norms or customer requirements.