water analysis Germany

...Water Analysis Swimming Pools Sales exclusively through Tintometer GmbH Lovibond Water Testing Schleefstr. 8-12 DE-44287 Dortmund...

...Monitoring of Frost and Corrosion Protection of Heat Transfer Media Regular monitoring of water quality in preheating systems and heaters is essential for smooth and safe operation and is therefore mandatory according to the regulations of the DVGW (Guideline G 495). A carefully dosed corrosion protection and the correctly adjusted water quality (e.g., pH value, possibly frost protection) form...

...Swimming in the pool is most enjoyable when we dive into clean, clear water free from dirt and grime. To maintain the quality of the pool water, regular maintenance is essential. With the water care brands Chemoform and DELPHIN, we provide everything necessary for pool water care.

...µdox is a multiparameter handheld measuring device that determines relevant measurements for checking water quality. This includes pH, redox, total hardness, acid capacity, and dissolved oxygen with a resolution of 1 ppb. The device is particularly easy to use and displays and records data from up to eight measuring points. Rapid analysis of oxygen in the micro range with response times of t90...

... conductivity — Savings on chemicals through demand-based dosing of additives — Efficiency increase of the system through reduced desalination losses and savings on blowdown steam energy — A water analysis device can monitor up to three boilers and can be integrated into plant controls with control technology.

The ProMinent Group has been a manufacturer of components and systems for dosing liquid substances and a reliable solution partner for water treatment for over 55 years. With innovative products, strong process engineering expertise, and application orientation, requirements are transformed into practical solutions. ProMinent supports its customers in terms of safety, efficiency, and environmental...

...With the new Drinking Water Regulation (November 1, 2011), more responsibilities are placed on property managers and owners. Trust TEHA as your reliable service partner. TEHA has automated all communication with laboratories, customers, and health authorities, integrating it into the annual heating cost billing process. Naturally, there are also internal controls in place to ensure compliance with all deadlines.

...The Karl Fischer analysis can be used to determine the water content in non-aqueous liquids (e.g., oils). Karl Fischer Titration The most common method for determining water content is the Karl Fischer titration. It has the advantage of being selective for water alone, meaning that other substances present in the sample do not affect the measurement results.

We are a service laboratory in the field of CHEMICAL ANALYSIS For 25 years, we have been providing competent solutions to problems - before, during, and after the production of your components and materials. Our routine services include: - Production-related examinations of medical products - Technical cleanliness of individual components - Analysis of plastics and additives - Tra...

...Used for water treatment of cooling systems (cooling towers). This system includes an antiscalant dosing, and during downtime, automatic preservation occurs. Product/Application: Drinking water treatment using reverse osmosis Solid content supply: Limited water analysis Total capacity: UO 10,000 l/h Total filter area: approx. 450 m²...

...Excellence in Pharmaceutical TOC Pure Water Analysis and Vaccine Quality Control The system based on catalytic high-temperature combustion offers a wide working range with effective rinsing function, a high degree of automation, and simultaneous blowing and measuring for high sample throughput. Characteristics of the multi N/C 3100 pharma: • TOC determination in direct NPOC mode for high...

... dimensions (L x W x H) 405 x 325 x 170 mm and weighing only 9.7 kg. Optional: — Water Cooling Unit COOL 50 or EVO COOL — EVO Remote Control — Gas Controller Box Output:DC Mains voltage:AC 1 x 230 V // AC 1 x 115 V +/- 15% Input:50 / 60 Hz Power rating:6 kVA Generator output:9 kVA Current range:5 – 200 A Current duty cycles:25% ED WIG 200 A - 100% ED WIG 120 A Weight:9.7kg Dimensions (L x B x H):405 x 325 x 170mm...

... Measurement Technology), 3D optical camera measurement - Tensile testing machine - Residual moisture measuring device - Color measuring devices - Gloss measuring devices - Torque and pressure testing - Grid cutting - Testing cabinet (example PV 1200) - Heat storage (example hydrolysis, conditioning) - Constant climate test for condensate water "KKK" - Condensation water test - Abrasion test (Crockmeter) - Light booth (standard light types: D65, A11, F10) - Combustion chamber for burn test - Various different hand measuring and testing aids (gauge measurement)...

...Visual Dew Point Mirror Analyzer for Hydrocarbon and Water Dew Point with High-Resolution Color Display The portable CDP301 Condumax is a dew point analyzer for quality control during the processing and transport of natural gas. Based on dew point mirror technology, this optical-visual measuring device allows for repeatable and highly accurate measurements of hydrocarbon and water dew points to verify compliance with DVGW worksheet G 260 in the field. The operator maintains control over the measurement at all times, ensuring that ISO6327 and ASTM D1142 standards are met.

... water vapor, or contamination with hydrocarbons. Pfeiffer Vacuum offers a range of quadrupole mass spectrometers with various mass ranges and filament materials. Type: quadrupole Range: for research & development, for environmental analysis, for the semiconductor industry, for leak detection Configuration: compact, modular...

...Moisture content, loss on ignition – Particle size distribution – open porosity – Water absorption – Bulk density / Grain volume weight – Bulk density DIN 51081:2002-12 - Testing of oxidic raw materials and materials - Determination of mass change during annealing. DIN EN ISO 26845:2008-06 - Chemical analysis of refractory products - General requirements for wet chemical analysis, atomic...

...whilst inside, a feeling of space in a new dimension is created. Drainage as a design feature The roof is the stand-out design feature of this transparent structure. It’s flat, but tapers downwards like a cyclone with a slight increasing lateral curvature. A lovely design feature, that also functions as drainage. In the event of rain, water will be released into the ground via this revolutionary feature. As with all Losberger De Boer space solutions, the Cyclone can be combined with other structures, to form a complete tent landscape. size:5 x 5 m side height:2.70 m...

...Process Characterization Software For The Transpector Gas Analysis System With one-click access to the two most popular RGA functions: monitor and leak check modes, FabGuard Explorer provides you with easy to interpret data showing the most frequently monitored gases (hydrogen, water vapor, nitrogen, oxygen, argon, etc.) in a convenient trend display. FabGuard Explorer is Windows® 8 ready...

...Hot liquids such as thermal oil, hot water, boiler water, or feed water must be analyzed regularly. For the analysis, it is most important to obtain a representative and accurate sample. To achieve this, the sample must be taken from a characteristic point of the hot flowing medium. However, a hot sample changes its composition when cooled in an open state. Volatile sample components that boil below the sampling temperature escape from open sample containers. In the closed NESS sample extraction cooler, the sample is cooled with water, ensuring a representative and accurate sample.

...Analysis of the cost-effectiveness of the cooling water system & steam boiler plant, chemical and technical water treatment, and compliance with current legislation (VDI, BImSchV, GefStoffV, TRGS)...

...Detection and counting of Legionella I Assessment of water quality I Detection and counting of Escherichia Coli and coliform bacteria...

... doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The design also grants an easy maintenance by the operator. The analysis protocol is printed out simultaneously to the distillation and the distillation curves in actual boiling temperatures (ACT) and atmospheric equivalent temperatures (AET) as well as essential distillation parameters are shown on the monitor. The final data and the distillation curves are printed and stored on harddisk.

... waters, too – has to be treated in a way, that introduction into a downstream sewage plant or recipient is according to the law. The multitude of ingredients of the landfill leachate has to be concentrated as much as possible, so that they can be bailed compact and without negative results for the environment. For the treatment of landfill leachate we offer the following processes of conditioning: Treatment of the leachate to reach recipient quality and concentration of the remaining ingredients in a way, that they can be leaded back to the landfill considering the water balance. Water analysis of ...

...We test products for their functionality under various environmental influences such as temperature, climate, air pressure, water, dust, as well as mechanical stresses. We simulate a variety of predictable environmental conditions in our laboratories and check whether your product can withstand these and will function reliably in its later application environment. Lifetime tests replicate the...

... plants • Flood protection systems • Weir structures Basic automation: • Pump controls • Cooling towers • Dosing systems Drive technology: • Three-phase drive technology Technological topics: • Control technology • Analysis technology...

...Collection of fluid samples from the facilities you specified, according to the Preparation of the fluid sample (only for oil) for immediate on-site analysis. Contamination according to ISO 4406 1999 and/or NAS 1638 Detection of free or bound water indicated in ppm or Vol. % Preparation of fluid samples for shipment to external laboratories for more extensive analyses. The parameters to be...

...Report on the Initial Assessment of Contaminated Land Suspicions • Investigations of contaminated sites in soils, soil air, and groundwater • Analyses of drinking water, utility water, raw water, and wastewater • Soil analyses for nutrients • Reports on environmental damage • Trace and corrosion analyses...

...(Schools, Kindergartens, Nursing Homes, Clinics) This sector requires drinking water of the highest quality. Especially for the youngest and oldest members of our society, as well as individuals with weakened immune systems, impeccable drinking water quality is essential for survival. We offer advanced process technology, computer-controlled systems for the analysis and neutralization of unwanted germs in the drinking water system.

...Our laboratory conducts qualitative and quantitative analyses. We analyze both organic and inorganic samples, such as building materials for asbestos, metals, plastics, cleaning agents, and oils. Additionally, we examine environmental samples for you, such as water, drinking water, or waste, as well as household goods, consumer items, textiles, and food.

...TC90) Mandatory Analyses: Extraction Testing FDA and EU: in water and n-Hexane according to CFR21 177 2600 Disinfection Resistance: Sanitary 3A Chemical Resistance: ISO 1817 Conformity Analyses: Heat Aging: ISO 188 Compression Set (DVR): ASTM D395 - ISO 815-B Mechanical Measurements (Tensile, Compression, Adhesion): ISO 37 / ISO 527-2 / ISO 604 / ASTM D 429...