supplies for welding Germany

... hole has to be drilled into a pipe. The swept outlet can then be welded into this hole. A swept outlet differs from a welding outlet in the type of welding. While a welding outlet is only placed on the run pipe and then welded, a swept outlet is welded directly into the run pipe. Ideal stress distribution Swept outlets were developed in order to achieve the best possible stress distribution for internal pressure and pipe forces. Due to the favorable voltage level, swept outlets are often used in highly stressed pipes in the oil and gas industry.

...Pleated Filter Cartridge Type: PPA Pleated PP-Membrane or nonwoven PP support nonwoven Hard cage Core + end caps made of 100 % polypropylene, meet requirements of FDA guidelines. Thermal welding processes seal all components No adhesives or extractable materials Version: DOE SOE 226 – O-Ring / Bayonet / Spear P7 SOE 222 – O-Ring / Flat P3 SOE 222 – O-Ring / Spear P8 Filter surface:0.4 – 0.6 m² Seal media:Buna, EPDM, Viton, Silicone Outside diameter / Inside Diameter:66 mm/27 mm Operating temperature:80° C Steam:121° C for 15 min. (20 cycles) Hot water:min. (0.2 barΔPmax.)...

... of the calculated program parameters, also using current percentage button — The current and wire feed parameters can also be changed during welding — Graphic display of the welding progress ... Package includes: — Controller — Power cable — Controller / power source interface cable — USB stick — 2 pieces tungsten boxes — Pen with touch screen function and LED light Optional...

...Metallbearbeitung Beine GmbH manufactures, among other things, welded constructions for mechanical engineering.

... plant builders and end customers. This branch-out process can be applied to steel and stainless steel pipes. This method is particularly suitable for pipe distributors where different or equally sized branches are required. IMH also supplies distributors or branch-out pipe pieces with various branches for other pipeline companies.

...TIG inverter welding machine with high frequency start. Thanks to the modular structure, the machine can be retrofitted with an additional water block without using any tool. With the two available control variants (Smart 2.0 or Comfort 2.0), a variety of functions are available: — TIG Liftarc welding without HF — MMA pulsing — TIG pulsing (sec/kHz) up to maximum 15 kHz — TIG AC welding...

...MTV GmbH supplies accessories for ultrasonic systems, including sonotrodes, boosters, converters, generators + controls, feed units.

...For information, please refer to the "Product Description" category. Filter Bags for Dental Laboratories | Dental Filter Bags We can manufacture and produce fine filter bags suitable for all dental suction systems. The bags are made from our Micro-8 or our polyester needle felt. By using our ultrasonic welding systems, which fuse the material using high-frequency vibrations, there are no seam...

... request, they can also be tested for biocompatibility. Ask your specialists about: - Ultrasonic / high-frequency welding and sewing of textiles - Cannula holding straps - Medical cushions - Velcro fasteners, among others, for wheelchairs - Bandages for orthopedics - Custom manufacturing of all kinds, packaging, and direct shipping to end customers - And much more.

... frequency changes, only the converter has to be replaced. The practical ultrasonic handheld welding device is suitable for "mobile" welding of single applications with a straight grip (model HSGG). It is excellently suited for repair, postprocessing, small series production, and for manual workstations in applications such as ultrasonic welding, cutting, rivets, or punching. With its complete synthetic design, it is very light. ...

... Sprays Sealants Lubricants Thread Locking Adhesive Tapes Cutting Tools Taps, Dies Steel Drills Masonry Drills Wood Drills Milling Cutters Diamond Cutting Discs Diamond Grinding Cups Abrasives Wire Brushes Cutting Discs Grinding Discs Saw Blades Chain Hoists/Hand Ratchet Hoists Pallet Trucks Lashing Straps Lifting Slings Wire Ropes Chains Hoses Welding Technology Welding Wire/Electrodes Welding Fittings Compressed Air Accessories Cleaning Agents...

...Prototypes, sample construction, custom, series, and special productions, CE markings, precision cuts, MIG, MAG, TIG, spot and manual arc welding, stainless steel and aluminum processing Our Services Support and guidance in development, planning, and manufacturing CAD designs Static calculations Practical development directly on the component Prototypes, sample construction Custom, series, and special productions CE markings Precision cuts Oxy-fuel and plasma cutting Shearing, bending, and sawing MIG, MAG, TIG, spot and manual arc welding Stainless steel and aluminum processing...

...Forms: Smooth or finely inclined ribbed bandage of 0.88 mm combined with a profiled frame. Versions: With adjacent frame, with supports, or with extended frame for hanging in the cart. When handling, the protruding frame serves as a handle. Also available upon request with cover. The individual forms are made in one piece, with rounded corners, seamlessly embossed, without welding or internal...

...Automatic welding helmet with blower respiratory protection A built-in air channel in the helmet supplies the entire breathing zone with fresh air. SideWindows: Unique filters of protection level 5 that expand the field of vision. The completely new facial seal follows both the contour of the helmet and that of the face. The innovative 3M™ QRS connection allows for the attachment and detachment of the breathing hose with one hand.

...CARBO also supplies technical gases for a variety of applications, for example: • Acetylene • Argon (Ar) • CARBOform (forming gas) • Chlorine gas • Carbon dioxide (CO2) for welding technology • Mixed gases for welding technology • Helium (He) • Propane • Oxygen (O2) • Nitrogen (N2) • Synthetic air • Propellant • Hydrogen (H2) If you are interested, please use our general email address or contact us directly by phone.

... mixture of 70% carbon dioxide and 30% nitrogen in bottles. Additionally, carbon dioxide is used as a shielding gas in welding and as an extinguishing agent in fire extinguishers, which are also filled by Lange Gas. For larger consumption, Lange Gas also supplies filling systems for carbon dioxide bottles.

... originated from welding technology. In the arc process, the electrically conductive evaporation material is introduced as a solid plate, either horizontally or vertically, into a vacuum chamber. It acts here as a negative potential and generates an arc upon contact with the anode. A small point with a diameter of a few micrometers forms on the surface of the evaporation material. At this point, and only at this point, the material evaporates directly and creates a highly concentrated plasma in the form of a vapor plume. Through this vapor plume...

...The GMH Group supplies forged parts that drive industries. For example, as weight-optimized spherical rods in automotive lightweight construction or as highly safety-relevant clamping levers for cable cars. Manufacturing Process We produce forged parts with the highest precision requirements: from die block pre-processing to tool assembly, die welding, heat treatment, and the forging process to...

...The round tubes are manufactured from a coil that is bent and electric resistance welded (ERW). The forming process can be according to EN 10210, which foresees hot forming or cold forming followed by heat treatment, or according to EN 10219, which foresees cold forming without following heat treatments. The finished product is fully killed and welding seam bead is inside and outside trimmed...

The company AS-Schweißtechnik GmbH is a family-run business with 15 employees. On a building area of 900 square meters, we have been manufacturing stud welding machines, accessories, stud welding automation, and welding studs since 1980. 1980: Founded by Mr. Hans-Joachim Arnhold 1980-1990: Development of new device technology and expansion of business areas 1990: Construction of the current...

... priority. The quality of our laser welding additives and the constant availability (stock availability) of all offered welding filler materials, both in delivery form and dimensions, have been sufficient reasons for us to equip and flexibly adapt our operations with the appropriate production resources from day one. This allows us to respond to your special requests at short notice and customize accordingly. Without our loyal and satisfied staff, as well as the integration of the next generation, this promise would not be possible. We look forward to the future!

... items and office supplies, as well as in the sanitary sector and the sports and leisure industry. The certification according to DIN EN ISO 9001: 2000 has contributed to this. Glowing wire tests and ball wire tests, as well as MFI measurements, moisture measurements, color comparison measurements, and Shore measurements are possible. Performance overview: product development, design and tool making, small and large series production, packaging and assembly, finishing and printing, quality management, warehousing and shipping.

Since 1972, MIG-O-MAT has been developing innovative welding technologies and manufacturing the corresponding devices and systems in the field of plasma welding and micro flame soldering. MIG-O-MAT also produces and delivers turnkey automation solutions for the plasma welding process and supports customers in process optimization, prototype and small series welding, as well as training.

...Founded in 1962, Siegfried Bäder GmbH - clear-flex® is a manufacturer of welding booths, welding separations, noise protection walls, work cabins, mobile protection walls, and PVC strip curtains. Specializing in workplace and environmental protection. Our medium-sized, owner-managed company develops and produces this product range exclusively "made in Germany". We sell our products throughout...

... Manufacturing / Rail Vehicle Construction • Plant Engineering / Mechanical Engineering • Shipbuilding • Refractory Construction With our solid foundation of technical know-how and the courage to innovate, we create safe and efficient solutions. Shape the future today with our product solutions. Our studs and stud welding technology are used worldwide, as we are your reliable partner in stud welding...

... our customers' wishes. Today, capilla® guarantees the highest quality and safety with a modern analysis laboratory, under the leadership of a PhD. In this way, capilla® sets global standards in modern welding technology. Whether it’s manual electrode welding, MAG welding, MIG welding, TIG welding, UP welding, or flux-cored welding: in our extensive product range, you will find the optimally suitable welding filler for all welding processes.

We are a global leader in the development, production, and distribution of plastic welding equipment and hot air devices as a heat source in industrial processes. For 70 years, Leister has stood for innovation and new technologies, a success-oriented mindset, the highest quality, and sustainable growth. 900 highly motivated employees of the Leister Group are dedicated to serving our customers around the globe.

KOCH-NEUBURG GmbH •is a manufacturing company specializing in precision mechanical components and devices •supplies customers in the machinery and plant engineering sectors, chemical plants, and refineries worldwide •delivers products in the fields of measurement and control technology, process engineering, and plasma cladding welding technology •standard products include water meters and flow...

ESAB ARCOS Georg Hartner GmbH is a family-owned company with a tradition and experience spanning many decades. With approximately 1,650 square meters of exhibition and storage space, we offer a wide range of products in the fields of welding and cutting technology, environmental protection, occupational safety, tools, and industrial supplies. We are here to assist you on-site or at our location...

...The German company Nelson Bolzenschweiß-Technik GmbH & Co. KG, based in Gevelsberg, was founded in 1967. It is the European location of Nelson Stud Welding, Inc. USA and, like it, belongs to the Doncasters Group Ltd. Staffordshire/UK. Nelson produces and supplies the complete product range for stud welding worldwide as the only company in this field. This includes stud welding machines of all sizes as well as accessories such as welding studs, ceramic rings, welding sleeves, and shaft anchors.