iso fittings Germany

... 1.20.1 BSP thread according to EN 10226 G thread according to DIN ISO 228 such as BSP / P R thread according to DIN 2999 like BSP / T. Standards and special requests We supply threaded fittings as standard in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. We can also supply 9000 lbs and special materials if required. Pressure levels:3000 lbs 6000 lbs 9000 lbs on request...

...Application Areas: Industrial Combustion Technology / Renewable Energy Technology / Environmental Technology / Industrial Furnace Construction Single-piece housing, concentric flap disc Operating temperatures up to 800°C, depending on material selection Intermediate flange housing for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Length according to factory standard Connection flange for drives according to DIN EN ISO 5211 Tests according to DIN EN 12266 ⇩ For details, please visit our homepage under "Data Sheet."...

...for the food industry, cosmetics, and pharmaceuticals in the standards DIN, ISO, SMS, ZOLL in the nominal sizes DN10, DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200 in the materials 1.4301 / 1.4307 / 1.4404 our fittings are double-sided with a welding end and consist of the components: nut, cone connector, threaded connector, and sealing ring DIN:11850...

...Pneumatic valves, valve islands, solenoid valves, directional valves, foot valves, ISO valves, throttle valves, check valves, manual valves...

...Welded Nipples Size: 1/8" - 4" Material: 1.4404/316L Our threaded pipe fittings are manufactured from welded or seamless pipes according to EN or ASTM standards. We produce all materials in stainless steel (such as 1.4571, 1.4541, 316L, 304L, etc.) or nickel alloy alloys with threads according to EN, ISO, NPT, or BSP. The threaded pipe fittings can be certified according to EN 10204 3.1. Custom designs according to drawings or threaded pipe fittings larger than 4" can be produced. We have a warehouse in Germany to deliver smaller quantities on short notice.

...All common steel threaded fittings in all connection sizes and combinations for connecting pipes with all types of threads e.g. Elbow 90° male/male, black according to DIN EN 10241:2000 - Thread DIN EN 10226-1:2004 (formerly DIN 2999) or ISO 7-1 (thread-sealing connections) - Steel, black...

...INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s. Hexagon socket head cap screw; Inox, 10-32 UNF x 5/8"; silver plated Hexagon socket head cap screw; Inox...

...Custom manufacturing of plastic injection molded parts up to 150g, using classic plastics, bioplastics, sustainable plastics, provision and production of injection molding tools - semi-finished products, intermediate products, and finished products manufactured according to your specifications. Furniture, seating systems, toys, ... Certifications: ISO 9001, CCC, SMETA Sedex, FSC, PEFC...

...DN 15 - DN 200, PN 16 Type 700.701 Application Area: liquid and gaseous media, pasty substances, –30°C / + 160°C. Design: Compact ball valve, full bore, piggable; low cavity, with mounting plate ISO 5211. Fig 701: with ball seal Fig 701/1: with ball seal, stainless steel version Fig 701 A: with ball sealing shells / low dead space Fig 701 A/1: with ball sealing shells / low dead space...

... shoulder on the piston rod. There are connections with screw-in holes for pipe fittings to BSPP ISO 1179-2 as well as vent holes for a free installation position. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders...

...Our modular cupboard trolley is specifically designed for use with ISO baskets. You can freely select the configuration and fittings to match your individual requirements. The modular system’s reliability and ease of handling allows you to rationalise logistic processes. The cupboard trolley can be configured according to your precise needs. Our anodised cupboard trolley for ISO baskets impresses...

... according to DIN 11850 series 2; - Weld ends according to ASME BPE; - Weld ends according to ISO 1127; - Clamp fittings according to inch (DIN 32676-C) Positioner: - Digital positioner type 8049; - Positioner with integrated process controller type 8049 IPC; - Positioner type 8049 optionally available in explosion-proof version; - Without positioner for shut-off function Versions: - Internal surfaces...

... edges, are self-locking, and therefore do not require screw locking. The flank angle for this thread type is 60°. They are primarily used as fastening threads for fastening screws in force-locking connections, such as: - External threads for barrel fittings - For closure screws and grease nipples - For screw-in ends on pin screws - For a tight fit in aluminum casting alloys (standard and fine threads) - For screw connections with a stretch shaft - In aerospace Single-part spindle length: 7500mm Multi-part spindle length over: 7500mm...

...One of our core competencies is screw connections according to DIN 2353 or ISO 8434-1. In addition, Blanke Armaturen offers custom solutions according to customer specifications.

...there is a drilled ball; once the hole in the ball aligns with the water line, water will flow out. A rotation of ninety degrees is sufficient to close the ball valve again. Most ball valves are operated with a wing handle, ISO-T handle, or wing handle. If the handle points towards the supply line, the ball valve is open; if the line is perpendicular to the pipe, the ball valve is closed.

...Solder paste "Cu-Rofix 3-Special", S-Sn97Cu3, DIN EN ISO 9453, flux DIN EN ISO 9454, 3.1.1.C, with RAL quality mark, DVGW test mark DV-0101 AT 2247, 0.100 kg cans, cartons of 100 cans...

...45° elbow, swivelable, made of brass, dezincification resistant, Push-in fitting - — Whitworth pipe thread DIN ISO 228 — Chambered O-ring — Seals FPM — Material in contact with media: Ms bare, dezincification resistant — Material not in contact with media: Ms bare — Temperature range: -20 to +120 °C — Operating pressure range: -0.95 to 15 bar — Not designed for continuous swivel movements...

...Stainless Steel Casting: GI-3-4408, Ball: L or T bore, internal thread "G" according to ISO 228-1, four-part, horizontal, hand lever with locking device, 1/4"-2", PN40 Four-part, horizontal housing, reduced passage, blow-out proof spindle, adjustable spindle sealing, ball bore in L or T shape, four ball seats, sealing on all sides, non-overlapping, hand lever with locking device, flange for actuator assembly according to DIN ISO 5211, TA-Luft certificate according to VDI 2440, CE conformity according to DGRL from DN32.

... under the technical standards DIN 50930-6 and UNE EN ISO 21003-3. – Compatible with multilayer pipes. – Compatible with several jaw profiles U, H, TH, RFz – Lead free brass available on request.

... with various hose fittings. Highest Safety Pressure fittings for high-pressure applications are impulse-tested according to DIN EN ISO 6803. Additionally, fittings in the highest pressure range are secured against pull-out by a separate interlock zone. Hose Connections We manufacture connections for hydraulic hose fittings for skiving and non-skiving. Due to a very high level of manufacturing depth and the corresponding machinery, we supply individual pieces, small series, or mass production according to your needs in: ■ Soldered version ■ Welded version ■...

...-assembled by the manufacturer. The embedded o-ring on the 24° taper ensures a high level of protection against leakage. Thanks to the large number of available types and designs, almost all common types and combinations of adjustable fittings can be implemented. With regards to their dimensioning and general design, STAUFF Connect Tube Fittings with 24° Taper / O-Ring (DKO) fully comply with the latest versions of the ISO 8434-1 standard. They are thus completely interchangeable with conventional adjustable standpipe tube fittings.

...The M 302 Gas is a 3-piece, silicone-free and blow-out proof stainless steel ball valve with internal threads, ISO 5211 top flange, and gas approval. Sizes 1/4" – 2", nominal diameters DN 8 – DN 50.

... 1200, metallic up to DN 800 max. PN 16 Construction length::EN 558 Series 20, optionally Series 25, ISO 5752 Series 20, API 609 Table 1 Flange standards::EN 1092 PN 10/16/25/40 (< DN 150), EN 1092 PN 10/16/25 (>150), ASME Class 150, AS 4087 PN 16/21 Flange facing::EN 1092 Form A/B, ASME RF/FF Top flange::EN ISO 5211 Marking::EN 19 Leak test for R-PTFE seat::EN 12266 (Leak rate A) Leak test for...

...All sensors available on our coordinate measuring machines can be used for the measurement itself. This solution allows us to perform flexible and precise gear measurement and evaluation of internal and external gears of straight and helical spur gears with involute profiles, worms, and worm wheels. The analysis of the gear measurement is based on national and international standards such as DIN, ISO, BS, and ANSI/AGMA or according to user-defined tolerances. For your plastic gears, we can also apply computed tomography...

... precision, field-proven, and certifiable differential pressure flow measurement sensors. The VersaMeter™ meets current NFPA86 guidelines for safe usage in the thermal processing industry. In addition, every VersaMeter™ comes complete with a 10point calibration curve traceable to a NIST transfer standard. The meters can also be field calibrated to meet CQI-9, ISO, NADCAP and QS quality audit systems. The VersaMeter™ product line comes in many sizes and is designed to fit directly into equipment piping. The VersaMeter™valve assemblies fit standard pipe fittings to better integrate into...

...Manufacturing of parts according to DIN/ISO in all standard dimensions or customized to your specifications: Reducing nipples, double nipples, couplings, threaded and hose fittings, closure plugs and caps.

... Brief information on this occasion: The original language of this entry is English. Translations into other languages provided by this portal may contain errors. For accurate information and details with correct designations, please visit our website kb-schmiedetechnik.de or our blog drop-forge.com. Certifications, norms and standards ISO 9001 and ISO 14001 PED 2014/68/EU, AD 2000-W0, ASME, KTA, RCC...

...Directly flanged or via pipe installation Valve blocks: Block and Bleed and Double Block and Bleed Valve versions up to 1379 bar Available in stainless steel and special materials, e.g. Super Duplex and Hastelloy TA Luft and ISO 15848 Optional with integrated two-clamp ring connection...

...Push-On end fittings for a variety of Swagelok hoses and flexible tubes simplify field assembly. End fittings for hoses and flexible tubes Push-On end fittings for a variety of Swagelok hoses and flexible tubes simplify field assembly. Options include Swagelok tube fittings, Swagelok tube adapters, NPT external threads, tapered ISO/BSP external threads, and connectors.