gas measurement instruments Germany

...Test gas consisting of 95%N and 5% H2 - Robust hand-held unit with integrated suction pump - Measuring range 1ppm to 1000ppm - Fast response time...

... high-pressure version for monitoring tasks in compressed air systems is available, capable of operating at pressures up to 150 Bar, featuring a ½" screw thread. For outputting measurement values, both analog and digital interfaces are available, with the possibility of custom adjustments for the measured variable (dew point, relative humidity, ambient temperature) in analog output as a 4-20mA current loop or 0-5V voltage output, as well as a combination of several simultaneously outputted measured variables at the digital interface.

Vacuum technology is essential for the production of countless products in our daily lives and enables future technologies. Our customers explore and develop the megatrends in their markets that will sustainably influence our future: new technologies, alternative energy sources, electromobility, or medical advancements, to name just a few. In close collaboration with our customers, we already prov...

... derived with the connectable sensors - Quantity measurement Application Examples: - Explosion-proof flow measurement in all industrial sectors, in municipal utilities and authorities, in research and development - Measurement of gas mass flow - Flow measurement in air, exhaust air, process gases, in particle- and condensate-laden exhaust gases, vehicle exhausts, aggressive gases at high operating temperatures - Measurements at gas blowers and gasification of natural gas pipelines - Measurement at filters and fans...

...The portable traveller microscope B30-MTM is used to inspect structures and defects on metallurgical surfaces, e.g. gas pipes. X/Y fine adjustment USB power supply...

...Synthetic gas test stand for simulating gas compositions (e.g., exhaust gases), for measuring and testing static and dynamic gas exchanges. Both hot gas and cold measurements are possible. _____________________________________________________________________________________________________ Test specimens include, for example, exhaust sensors in automobiles and combustion systems (lambda sensors...

...Visual Dew Point Mirror Analyzer for Hydrocarbon and Water Dew Point with High-Resolution Color Display The portable CDP301 Condumax is a dew point analyzer for quality control during the processing and transport of natural gas. Based on dew point mirror technology, this optical-visual measuring device allows for repeatable and highly accurate measurements of hydrocarbon and water dew points to verify compliance with DVGW worksheet G 260 in the field. The operator maintains control over the measurement at all times, ensuring that ISO6327 and ASTM D1142 standards are met.

... scavenging gas with a slight overpressure. The measurement of the O2 concentration can be optionally performed at the rear gas outlet for this purpose. Interior chamber:20 x 20 x 20 cm Dimensions, chamber:35 x 27 x 45 cm (B x T x H) Weight:~ 20 kg Power consumption:200 W - 650 W Mains:100 - 240 V, 50/60 Hz Operation temperature:10 to 40 °C Storage temperature:-10 to 60 °C Humidity:< 80% non-condensing Cooling:air cooling...

... consists of a high-purity ceramic. Another special feature of the LMK 858 is the separability of the probe head and cable part. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 45 mm — chemical resistance — housing PP-HT — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — cable protection — diaphragm pure ceramic (99.9 % AI2O3)...

... for short, is used for the precise measurement of air or gas volume and mass flows of 100,000 m³/h. The core of the VMF® system is the FlowProcessor, a PC system with the corresponding data acquisition hardware. Venturi nozzles convince by a low remaining pressure loss and are suitable for flow measurement of gases with high temperatures. The software developed under LabVIEW is operated either via touch screen or with mouse and keyboard.

... optimize yields and procedures. The BlueVCount consists of a volume measurement unit with a 1mL cylinder, equipped with a special oil and a magnetic piston. Every time 1mL of gas passes through the cylinder, it is counted and relayed to the integrated display or via Modbus RTU to software (e.g., BlueVIS). A minimum flow is not necessary.

... airtight room envelope.With the Minneapolis BlowerDoor measuring system and the FireProtection software, you can easily and accurately determine extinction gas holding times in accordance with ISO 14520 in rooms of angular volume. ...

...LiquiScale is an advanced level measuring device in IP65 design for pressurized liquid gas tanks. Our measurement system features drift-stable differential pressure technology (drift over 10 years less than 0.3%) and reliably monitors the level as well as the tank head pressure. The large, brightness-adjustable LED display allows for easy reading in the dark and from distances of over 5 meters...

...The WARP 100 is an inline pipe measurement system for wall thickness and diameter measurement at up to 38 measurement points and 19 axes. More than 1100 measurements per second ensure continuous measurement. This is particularly important for pipes with high quality standards, such as pressure or gas pipes. The maximum line speed for 100% coverage is up to 11.8 m/min. The WARP 100 is available in...

...Mechanical connections up to 10 inches / DN 250 The IN-FLOW series of thermal mass flow meters for high flow rates of pure gases is equipped with an industrial-grade housing that provides IP65 protection. The control valves can either be integrated directly into the instrument or installed separately to measure and regulate gas flows. Smallest measurement and control range 0.4...20 m3n/h Largest measurement and control range 220...11000 m3n/h...

... automated, eliminating the need for complex reconfiguration of the device. Pre-set standard methods further simplify your work and save measurement time. - Optimal for oil and gas, petrochemicals, the chemical industry, and the polymer industry - Compliant with common international and national standards (ASTM, EPA, DIN, ISO, EN, etc.) - Modular principle allows for individual customization of the system – if your requirements change, expansion is always possible - HiPerSens detection combines a wide, linear measurement range with the highest detection strength Type: C/N/S/Cl Elemental Analysis...

... humidity not only by utilising ambient air and the built-in heatable water container, but also via an external gas supply with compressed air, nitrogen, and argon. Variable flow rates between 70 and 3500 ml per minute are possible. The integrated pressure regulator is specially calibrated for nitrogen and argon. ...

...Gas warning center for measuring flammable and/or toxic gases as well as oxygen. Graphic display. Menu-guided configuration. 2 alarm thresholds. 2 alarm, horn, and fault relays. Analog output 4…20 mA.

... measurement values are in view, and the hot-spot display quickly and easily locates the core flow. Easy, intuitive operation, the latest technology, and an ergonomically shaped housing with a soft case and integrated magnets are just a few of the outstanding features of the Fyrite® INSIGHT® Plus. The B-Smart® sensor technology allows users to replace the sensors on-site, eliminating the need for factory calibration. A long-lasting O2 sensor is also available. The flue gas measuring device is fully equipped and ready for immediate use.

...Pressure tapping fittings PN100, pressure tapping fittings PN400, analysis sampling probe - As part of pressure measurement, we offer a range of tapping fittings according to various DIN standards. With our fittings and probes, pressure measurement for steam, gas, and liquids is simple and safe.

... measure a particle size distribution from a collective of particles like a spray and to appropriately process, describe, and present it. The particle material may be solid or liquid in a gas or gas like air bubbles in a liquid. For the measurement it is only important, that the optical properties of the continuous and the dispersed phase are different. The laser diffraction particle sizer offers the advantage of a fast and non invasive measurement in a wide range of particle sizes. Especially in case of sprays or suspensions this method has become a standard measurement tool.

... quantification of gas compounds with very high concentration. The cell has a volume of 25 ml only to enable a fast gas exchange with minimum gas consumption. Its PTFE coating and ZnSe windows ensure a maximum corrosive protection. The MATRIX-MG01 is equipped with temperature and pressure sensors and their measurement values are automatically read out and considered within the control software OPUS GA.

...)::Microcontroller 16-bit μC / 40 MHz Pressure sensors 1::Differential pressure sensor Pressure sensors 2::gauge pressure sensor Measurement ranges::3 ml/min - 4650 l/min Result units::ml/min, ml/h, l/min, l/h, mbar • l/s Pressure ranges::-1 bar, 150 mbar, 1 bar, 6 bar Standard test modes 1::Direct method, indirect method Standard test modes 2::Exponential extrapolation, bypass Programmable test phases 1...

WPM Werkstoffprüfsysteme Leipzig GmbH is an innovative and dynamic company with many years of experience and expertise in testing technology. Your requirements are developed into customized projects according to your specifications by our highly qualified engineers and specialists. The focus areas of our business include: standard testing machines, such as pendulum impact testers and hardness test...

... Vaisala OPT100 were safety and reliability in demanding operating environments. The IR sensor is based on Vaisala's key technologies and components, which are manufactured in our own clean rooms. Thanks to vacuum gas extraction, data deviations caused by oil temperature, pressure, or type are eliminated. The result? – Real-time fault gas monitoring without false alarms and without maintenance effort.

...High-pressure blower for gas meter testing facility...

... thermal or infrared sensor. The standardized output signal of 4-20mA simplifies integration with existing systems. Calibration and adjustment can be performed as a one-person calibration without the need to open the housing. Power Supply: 24V Power: approx. 3.3 W Operating Temperature: -25°C to +60°C Signal Output: 4 to 20 mA and Modbus Housing: Aluminum alloy / Stainless steel Weight: approx. 1300 g Dimensions: Diameter 95 mm, Height 82 mm Connection Cable: 4-core, shielded cable Gas Type: Butane...

...Four-Channel Power Supply / Display + Operates four flow meters, controllers, vacuum gauges, and more + Simultaneously displays four channels with measurement units and gas types + Analog: 0-5 VDC, 0-10 VDC, 4-20 mA + RS-232/RS-485 + Ratio control for gas mixing + Totalizer function...

... upgrading to differential pressure technology and in-situ calibration capabilities. The FurnaceMeter™ represents a full range of precision flow measurement instruments utilizing our proprietary differential pressure flow measurement design proven to meet the rugged requirements of industrial heat-treatment applications. The meters utilize precision, field-proven, and certifiable differential pressure flow measurement sensors. The FurnaceMeter™ meets current NFPA86 guidelines for safe usage in the thermal processing industry. In addition, every FurnaceMeter™ comes complete with a 10point...

TetraTec Instruments GmbH specializes in the development, manufacturing, and calibration of sensors, measuring and control devices, as well as custom testing and calibration systems for measuring pressure, flow, and tightness of air and gases. Based on modular software, hardware, and sensor technology for pressure, temperature, humidity, and flow, the offered measuring and control devices are sui...