environmental monitoring Germany

...We offer you all common analytical techniques for quantitative and semi-quantitative XRF, X-ray fluorescence analysis of various materials on up to 71 elements of solids. Fast and reliable analyses with high precision and accuracy down to the trace element range, on request as an immediate service – accredited test procedures – Wide element range up to 71 elements from fluorine to uranium in one measurement run, suitable for product and raw material monitoring or analysis of unknown materials –Various preparation techniques such as melt fusion, powder compaction, non-destructive measurements...

... been optimized for the absorption spectrum of N2O (CWL: 4525 ± 20 nm / HBW: 83 ± 6 nm) and can provide important data, especially in the analysis of exhaust gases in the automotive, railway and marine sectors, the monitoring of industrial exhaust emissions and environmental monitoring.

...Handheld RFA spectrometers analyze the chemical composition of various materials flexibly and non-destructively. They have proven particularly effective in metal analysis. The areas of application are diverse: recycling, quality assurance, confusion testing, precious metal analysis, environmental monitoring, forensics, archaeometry, RoHS, chemistry, pharmaceuticals, and much more.

...The million-fold proven LogTag data logger series, widely used for transport, cooling, and environmental monitoring in large quantities, has been expanded to include an ultra-low temperature data logger.

... you with regard to your testing tasks and, together with you, transfer the entire testing process into a specification sheet. OUR OPPORTUNITIES 2-chamber system air-air Test chamber volume up to 130 liters Temperature range hot chamber 50°C to 200°C Temperature range cold chamber -80°C to -100°C Change between chambers <15 seconds Maximum test material weight 25 kg State monitoring of the test specimens during the test...

...Pumps are the driving force in thermal oil systems. To operate them, functioning pumps are a fundamental requirement. If the system fails, the costs of downtime can quickly exceed the total value of the pumps. In the event of damage, there is also a significant risk of fire and environmental pollution. Therefore, it is important to act preventively to respond quickly to warning signs or damage events. This can minimize resulting damages or avert downtime.

... affect the measurement signal. Application areas: — Control and monitoring of production systems — Cooling and climate systems — Hydraulic or pneumatic machines — Monitoring of compressors or pumps — Mechanical engineering — Plastic processing industry FEATURES Measurement ranges from 0 ... 0.05 bar to 0 ... 500 bar and -1 ... 1 bar to -1 ... 10 bar Measurement accuracy from 0.25 % of full scale...

... very versatile range suitable for all applications, both indoor and outdoor. The cables are also mobile and can withstand great stress from environmental conditions. — Reliable, efficient and easy to install. — Extensive range of accessories. — Also highly flexible for use with drag chains.

... system ensures optimal tightness • The MKF-VA is very user-friendly and easy to maintain due to its thoughtful design • High operational safety is complemented by reliable monitoring functions • Also available with an attached fan module • Dimensions 700 x 660 x 1450 mm, 660 x 550 x 1560 mm (L x W x H) Application areas o Welding laser o Cutting laser o Central extraction Extraction volume MKFVA180: up to 180 m³/h Extraction volume MKFVA320: up to 320 m³/h Extraction volume MKFVA380: up to 380 m³/h...

... over a very long service life. This is mainly because the sensitive gas holder is protected against UV radiation and other environmental influences by a steel container manufactured with the Lipp dual seam system. Furthermore, this construction method allows an exact leak test and highly accurate metrological monitoring of the gas fill level. Both aspects are essential for safe and efficient plant operation. With certification according to § 19 WHG for Lipp GmbH and DVGW approval of the gas storage tank, further conditions are met for use in municipal waste water treatment plants. ...

...The Optimus Green sound level meter has been specifically designed as an environmental noise meter and is perfect for measuring and monitoring exposure to noise pollution and environmental noise sources. Available as either a Class 2 or Class 1 sound level meter, built to IEC 61672, the Optimus+ Green environmental noise meter provides everything you need to measure both occupational and...

...The gas analysis device PGM-IR features a highly precise NDIR infrared sensor that detects the smallest and usually undetectable leaks, displaying gas concentration in ppm. Thanks to the fast response time of the gas leak detector, the duration of leak detection can be reduced by almost 50%. Environmental conditions such as wind, temperature, or contaminants have no impact on the detection...

... sluices or, in individual cases, double-gate sluices are used for the pressureless discharge of the material. In order to increase the cyclone effect, or the degree of separation, counter-spirals with a pipe connection can be placed on top of the immersion tube. Further options are, for example, wearing devices, explosion pressure relief devices, control flaps, level monitoring devices and manufacturing in stainless steel or galvanised sheet steel.

...cross-sections from 2.5 to 6 square millimeters are possible. We process various high-voltage connector systems, such as HVP 800, HVA 280, HVA 630, IPT, or HVP 1100 from TE. The selection of cables is made according to the environmental conditions and their requirements. As stock items, cables from the following manufacturers are available: Coroplast, which meet the requirements of LV216-2, and Huber and Suhner Radox 155 S FLR, also for the American market.

... measurable gases: NO2, NO, O2, O3, H2S, Hybrid (AsH3), F2, Cl2, HF, HCl/HBr, HCN, SO2, NH3, CO, H2, CH4/UEG, CO2, COCl2, VOC (PID), customizable Monitoring of workplace limit values (AGW) and operational tolerance values (ETW) Special Features 8.4’’ touch monitor displaying real-time measurement values Internal buzzer and front LED indicate limit value exceedance per sensor Approximately 3 hours of continuous operation (Li-Ion) GPS optional Areas of Application For mobile firefighting operations Disaster relief, civil and environmental protection...

...polders, and dikes Creation of vertical seals in the subsoil (e.g., as overlapping bored pile walls, high-pressure injections, single-phase sealing walls, steel sheet piles) Construction of technical structures such as intake towers, stilling basins, sluices, tunnels Acquisition, delivery, and installation of materials for flood protection dams Noise barriers, roads, and railway embankments Soil stabilization (as a cost-effective alternative to soil replacement) Monitoring by our geotechnical laboratory Pipeline construction...

... Upon request, we not only protect your IT devices against external environmental influences such as dirt, water, and dust, but also against eavesdropping attacks via electromagnetic radiation. Our services at a glance: ■ System hardening of commercial COTS products ■ EMC-tight and heat-loss optimized enclosures ■ Emission-secure devices according to Comsec Zone 1 ■ Compact 1U design ■ Self-developed monitoring and control systems ■ On-board voltage for use in vehicles...

...Compact network sensor with 2x 1-Wire ports as well as Ethernet and Wi-Fi support for monitoring environmental parameters The SD-2x1Wire from HW group’s SD product line monitors temperature, humidity, and other environmental parameters. Up to four 1-Wire or 1-Wire UNI sensors can be connected. The network sensor can be conveniently controlled remotely via the free SensDesk portal or the SensDesk...

... load of the ambient air and comply with local environmental and health and safety regulations the extracted air can be passed directly into an ozone catalyser. Our ozone catalyser is a high performance filter unit designed specifically for ozone destruction in Corona treatment. Since ozone is extremely corrosive, all materials and seals used are corrosion resistant. The housing and all internals are made from corrosion resistant stainless steel. For reliable treatment of the exhaust air, three filter stages are contained within the housing.

...Optical measurement technology is versatile and can be used for both measuring and monitoring conditions. The optical systems based on camera technology are characterized by their high flexibility and can be used very flexibly under appropriate environmental conditions. These systems are primarily employed for inspection tasks during assembly, for type monitoring, and for damage checks...

... Accuracy: ±5mm Safety Laser Scanner 360°: Pld/Category 3 (ISO 13849-1) Status LEDs: Programmable Status LEDs Lifting Unit: 4 x 0-55mm at 400 kg, 4x4000N Battery: 48VDC/120Ah Supply Voltage: 400V, 50-60Hz Charging Time and Runtime: 1h / 10h Charging Type: Inductive Charging Human-Robot Interaction: Visual, Audio, and Force Feedback, Motion Tracking, PC-based GUI Environmental Visualization: Dynamic Mapping (SLAM), Pallet Identification, Dynamic Obstacle Detection and Trajectory Fleet Management: Formation Driving, Fleet Monitoring Tool...

... boilers ranging from 3 to 15 kW, with three heating stages. The installation can be connected to single-phase or three-phase voltages of 220 V or 380 V. The advantages of electric boilers from the Tenko brand include: high core efficiency factor (BDC), ease of maintenance, environmental friendliness, reliability, and simplicity of installation, operation, and transportation. Combined with their low price and low operating costs, electric boilers from the 'Economy' series have become an ideal option in terms of efficiency, functionality, and performance.

...Display devices for various applications, such as weighing, dosing, counting, controlling, monitoring, classifying, etc. Whether in a calibrated or explosion-proof version, whether for areas with increased hygiene requirements or for wet environments, suitable evaluation devices are available for a wide range of environmental conditions and applications. Application examples: • Weighing • Dosing • Formulating • Counting • Controlling • Classifying • Statistical quality recording • Fill quantity control...

... of TabControl Performance: - Connection to all common tablet press brands - Long availability due to robust standard hardware - Intuitive and user-friendly 19'' touch control interface - Display and monitoring of individual pressing forces - Individual selection of defective and sample tablets - Monitoring of jamming issues - Control of all machine functions and peripherals - Motorized adjustment of handwheels - Batch-related production...

...The ability to detect transparent materials such as films or liquids is also of particular importance. Ultrasonic sensors are used for distance measurement (e.g., diameter detection, loop control), level or fill height monitoring (e.g., silo querying), and for positioning and presence detection (e.g., glass panel positioning, film tear detection, glass bottle querying). Voltage type: DC Design...

... explosion-proof and intrinsically safe versions. Additionally, the OLC/OLCT 100 features an infrared sensor that can be used under harsh environmental conditions—when sensor poisons affect the function of catalytic sensors. A three-year warranty is provided for the sensor and electronics. Thus, the OLCT 100 XP-IR stands for high reliability and a long lifespan.

...emIOT systems can communicate over various field buses and exchange data bidirectionally. Additionally, extra interfaces allow for data collection from external sensors for monitoring a facility. The scalable hardware platform of the emIOT series is based on the long-established successful embedded PC series from Janz Tec, offering extensive customization options to meet specific requirements regarding performance, environmental conditions, or required volume tiers.

... portable analysis and diagnostic equipment. They are used in biological and medical diagnostics, instrumental analysis, process control, environmental monitoring, analysis of agricultural and nutritional products, measurement technology, and gemology.

... custom systems that are used in areas such as material testing, environmental monitoring, and medical technology. Opsytec places great importance on quality, reliability, and precision, which is reflected in the high satisfaction of its customers. Furthermore, the company offers comprehensive services, including calibration and consulting, to meet the specific requirements of its clients. Opsytec's products are used worldwide in laboratories, research institutions, and industry, characterized by durability and excellent performance.

Project Management, Material Testing, Salt Spray, Technical Cleaning, Impact Resistance Testing, Wastewater, Fuel Analysis, Purity Fluid Management, Cooling Oils, Plastics, Ozone Testing, Environmental Simulations, Oils and Products, Mediation, Engineering Services, Physical-Chemical and Mechanical Testing, Consulting.