die set Germany

...Dressing set for temporary treatment of open wounds in the abdominal area. Die-cut parts made from special PUR wound foam material. The very regular, open cell structure allows for use in conjunction with a negative pressure wound therapy system. Due to the cutouts, the wound foam can be easily adjusted to the appropriate wound size. Cost-effectively die-cut while considering increased hygiene and documentation requirements. Special type for use in the medical technology sector.

...Sets blind rivets from 3.0 to 6.4 mm Ø of all materials, except for PolyGrip® blind rivets with 6.4 mm Ø made of stainless steel and G-Bulb® blind rivets. Technical Data Weight: 1.85 kg Total Length: 570 mm Device Stroke: 10 mm Equipment Mouthpieces: 16/29, 16/32, 16/36, 16/40, and 16/45 Rivet Mandrel Collection Container Maintenance Manual with Spare Parts List Jaw Set (3-piece)...

...Manually adjustable hand stamp marking machines for the steel, tool, and machinery industries for easy embossing of multi-digit markings. These marking machines are best suited for consistent markings that are not frequently changed. By removing the pin lock, the wheels can be easily turned to set the desired combination. Additionally, the striking cap is replaceable. For the standard marking machines, we offer character heights ranging from 1 to 10 mm with 11 marking fields around the wheel circumference.

... for particularly high environmental requirements. Housing material: Plastic, metallized plastic, metal Design: Installation housing set, inline coupling, connector set, patch cables, protective caps Locking: Bayonet, M28 Mounting type: Front, rear wall mounting Special features: UV-resistant, weight-optimized variants available Connection type: Solder, IDC, screw connection Shielding: With/without shielding Connector type: RJ45...

... Other sets on request Description:Lift castor system for a fast and flexible placing of plant and machinery or assembly tables Max. load:500 kg per lifting unit Material:Housing: Die-cast aluminum Roller: Plastics PA with ball bearing Roller housing: Zinc plated steel Set:4 lifting units 1 hydraulic drive unit 4 hydraulic pipes at each 3 m, pre-filled...

...Saddlery buckle-set incl. slide...

...The open, horizontally movable pressing stamp facilitates the crimping of short 90° fittings with a long neck. The single-phase version of the standard drive unit makes the UA4 hose press usable worldwide in workshops and service vehicles. • Easy crimping of 90° fittings • Horizontally movable pressing stamp for good accessibility • Split crimping die set for easy and quick changes Powerful...

... stand, as the material wipes off automatically after punching. The scraper contains two or more disc spring packages that guarantee perfect scraping even in the border areas. A fixed connection between the tool and the upper part of the press is therefore not required. To determine the exact position, each tool has a positioning pin (two for shaped holes) on the underside, which is precisely aligned with the cutting elements (center of the hole). The above picture shows a complete punching unit without cutting elements and one cutting set (punch and die) each for round hole or shaped hole.

...TriCut® Sheet Metal Punch Set M12 - M40 for Mild Steel S 235 - Alfra sheet metal punches impress as a burr-free and low-noise alternative to sawing. The ALFRA TRICUT was the first three-splitter on the market. The waste piece breaks down into three parts, preventing it from jamming in the die – resulting in burr-free cutouts. The TRICUT can be used for material thicknesses of up to 3.0 mm on...

...):56.500 min-1 Air Consumption (No load):0.17 m³/min Mass (Weight):0.27 kg Standard Accessories Bushing R1/4 x NPT 1/4:1 pc. Standard Accessories Mounted Wheel 5 x 13 x 3:1 pc. Standard Accessories Spanner 7:1 set Standard Accessories Spanner 7 x 9:1 pc.

...Excellent Pinzetten Set 4 tlg. ist das perfekte Set aus Pinzetten, das man für die tägliche Maniküre & Pediküre oder auch im Urlaub z.B. zum Entfernen von Splittern verwenden kann. Order number:12032 EAN:4250550301867...

... - Forged from carbon steel in a die - Sandblasted surface - Includes spring - Fits perfectly in the hand - Non-slip handles All sheet metal shears in the "eXtrem" series are also available in various sets at unbeatable prices.

...Execution with 3 hooks. The set consists of 2 right hook parts, 2 left hook parts, and 4 closing parts. We supply hardware technology made of steel/stainless steel, die-cast steel and zinc, aluminum, and plastic to many different industrial sectors. Delivery is made in bulk, pre-packaged and labeled according to specifications, or in the form of assembled units. Manufacturing is carried out on...

... bottom and top flaps are cost-effective and suitable for both manual and machine sealing. Erecting boxes are characterized by their variable fill height and can be transported in a space-saving manner due to their flat storage. Die-cut boxes are customized according to your specifications.

...while the robot axes are set to "soft" mode. It then moves with the product to the optical part inspection, which is mounted above the cooling basin. Subsequently, the product is cooled and fed onto a chute. Defective parts are placed separately in a container. Load capacity: 16 kg Working range: 1500 mm Max. product weight: 8 kg...

...You provide us with the drawing or the data set, and we manufacture the workpieces for you on our machines. From single parts to medium series made from materials of your choice. Our range of services at a glance: Precision and standard machining of cast parts, single part production up to small series of approximately 1,000 pieces/year. HSC finishing of large tools in the ZB, tool assembly including coordination in a die press.

...Space-saving and cost-effective storage of folding boxes that can be easily set up as needed.

...Can set with secondary use as a calendar, clock, or thermometer...

... corresponds to a bending capacity of 100 x 15 millimeters for construction steel. An easily adjustable stop allows for bending accuracy within the 0.1 mm range. The hydraulic unit is always set up separately and connected to the press with 2 quick-release couplings. What makes the "Mobi-Bieger" special is that it presses the punch into the die. This is not common for small machines. To bend a closed part, there is the option to exchange the punch with the die. If needed, it can also be angled around a bending mandrel. With this, a rectangle with a leg length of 50 mm can be bent.

... comparison against data set What we measure: Plastic parts (automotive, electrical, medical sectors, etc.) Rubber parts Silicone parts Stamped parts Aluminum die-casting Plug connectors Profiles Turned parts CNC machined parts...

...ETC Source Four PAR EA, black, including filterframe, lense-set and 1,5m cable (without plug) CE Source Four PAR delivers a smooth even field light output. The 575W HPL lamp reduces power usage over 40 percent. The optional Metal Cold Mirror (MCM) reflector uses a unique dichroic coating to remove 90 percent of the heat from the beam. Integral die cast faceted aluminium reflector, includes VNSP...

...TYP C 044 Cutting, stamping and bending device for axial components Description The Streckfuss machine Type C 044 is designed, to cut and form the leads of axial components for vertical mounting. A variety of form shapes are avalaible through the use of interchangeable die sets. To make the insertion of components with short leads into p. c. boards possible, the leads have to be cut to suitable length and formed to required raster. The set up adjustments are quite simple and secured to provide accurate forming of every compöonent lead. Components...

...The classic lever lock H4J420 is versatile. It is suitable, for example, for locking mailboxes, drawers, cash boxes, and registers. By turning the key, you can open and close the lock. You can choose whether you want it in a keyed alike or keyed different version. The keyed alike version can be combined with the keyed alike furniture locks. To ensure the usual high quality, we manufacture this lever lock from zinc die-cast and equip it with a galvanic surface (nickel). By the way, to accommodate various installation situations, the set always includes three different bolts.

...Der freistehende moderne Tischkamin Qlima auf Bio-Ethanol sieht in Ihrem Wohnzimmer oder mit Ihrem Lounge-Set oder Terrassen-Set wunderschön aus. Ihr könnt alle drumherum sitzen und das stimmungsvolle Feuer genießen. Sie haben sofort ein schönes Flammenbild ohne die Unordnung von Holz und Feueranzündern oder das Problem von Rauch und Funkenflug. mix modellen...

... uncover unexpected sources of revenue in your company. Targeted consultations and constructive changes can save you significant costs each year. Additionally, ZUKOS supports you in the external presentation of your company. Contemporary marketing and modern advertising set you apart from competitors and bring you new customers. Training and placement of skilled workers is also a focus at ZUKOS. Our...

... always ready to go the extra mile. Traditional entrepreneurship combined with modern management. These are the facts that have shaped our more than 58-year success story. The Föhl Mission Statement An important key to top performance, profitable growth, and success lies in our mission statement: value creation through appreciation. We have set the course and want to explore new paths together. In a...

...exhibition construction, display, bus lettering, showroom, 3D design, illustration, scribbles, custom contour-cut stickers, small runs, non-slip, scratch-resistant, laminate, display, self-adhesive film, UV laminate coating, smudge-proof, scratch-resistant, roll-up display, easy to set up, easy to dismantle, quick to set up, quick to dismantle, B1 certification, folding wall, pop-up system, cost...

We are a young, high-performing company with motivated employees who are eager to meet your needs. Our longest-serving employee has been with the company for over 10 years and has perfected his skills over the years. Our main activities include processing wood pulp board and corrugated board, from pre-press, through printing and die-cutting, to packaging (e.g., set packaging, individual packaging...

... managed to set standards through decades of work. In the current edition, INBUS is the only hand tool brand that can fully convince the jury. Dr. Florian Langenscheidt describes brands as promises that guarantee quality and tradition with a seal and assure exceptional performance and perfection in every detail. Brands relieve the risk of choosing something wrong and provide orientation and support...

... saves the customer from having to set up production areas and separate inspection and control stations. Pickup and delivery are done with our company-owned truck. If desired, such activities can also be performed on-site at the customer's location to prevent a short-term production interruption. For all activities, we provide inspection results, and for sorting actions, we also provide quantity statistics, which are handed over to the customer. We have been certified according to ISO 9001:2015 since 2006.