cutting iron Germany

...Cutting Rings...

... iron, chemically nickel-plated Technical Data: Motor power: 2.2 kW (3 HP) at 2800 RPM Cutting discs*: diameter 254 mm Cutting capacity: diameter 65 mm Table travel (feed cut): 160 mm Cutting table: 345 x 155 mm (W x D) gray cast iron, chemically nickel-plated, 12 mm T-slots Power supply: 400 V / 50 Hz / 3 phases Safety features: Electromechanical locking of the cover, emergency stop switch, CE compliant Additional features: cleaning hose, interior lighting, large viewing window Weight: approx. 80 kg Dimensions: 790 x 700 x 460 mm (W x D x H) * Cutting discs, consumables and...

...The 72711 belt sander offers all benefits of the 72780 series but with only one side. It is made for heavy duty applications. For sitting or standing operation. Variable cutting speeds from 900 to 2,800 Rpm. Optionally with frequency converter. Gross weight:190 kg...

... components – iron, aluminium, copper and plastics. These are then made available again to industry as secondary raw materials. We equip our clients with extremely tough and hardwearing shredder disks and thus contribute to costconscious handling of resources. ...

...The new high-performance band saws from the Dynamic range stand out for their power, ease of use, and energy efficiency. Series profitability The HBE Dynamic includes numerous features that make your production even more profitable: — Robust and durable construction in anti-vibration gray cast iron — Sensitive cutting pressure control BEHRINGER — Precise portal-shaped guiding system...

...Silicon Steel Silicon steel is a silicon-iron alloy with a silicon content of 3% to 5%. It is divided into oriented silicon steel and non-oriented silicon steel. Also known as electrical steel, silicon electrical steel, lamination steel, relay steel, or transformer steel, it is a special steel with added silicon, which improves its electrical resistance and magnetic properties while reducing...

... in the front, corrosive stress should be avoided, and mechanical load should be kept low. In addition to standard commercial formats, cut pieces (e.g., arches) can be made from these formats. When cutting arches, the dimensions of the standard formats are not followed. Therefore, any desired diameter can be produced from a single format, which facilitates assembly and minimizes waste.

...With switchable sections - Slag discharge via drawer - Standard or custom designs - different cutting surfaces made of flat iron or as point-specific special surfaces...

...Automatic connectors with self-tapping thread; profile groove 5, 6, 8, 10, 12 for quick and stable connection of two aluminum profiles without profile processing various designs — Cutting sleeve including assembly set for profile with hammer nut or T-nut — Cutting sleeve without assembly set — Single or double connector — Spacer connector, joint connector, or corner connector Material options...

...technoPLUS is a cutting-edge design enclosure made from high-quality Luran that is resistant to UV rays for electronic applications in outdoor environments. The lid already features a cavity for accommodating membrane keyboards, screens, or touchpads. The screw channels are located on the outside of the airtight compartment, allowing for the installation of the enclosure with the lid closed. The...

... needle, take care for a perfect feeding process. The special folders for different belt loops widths and fabric thicknesses are available in the following dimensions: Widths: 6, 5, 8, 10 and 12 mm Diameters of folders: 0.5, 1.0, 1.5 and 2.0 mm By means of a special rapid locking device the folders can be quickly exchanged within one belt loop width without any tool. Completely mounted on the sewing machine stand with maintenance unit, table board, with electronic motor 230/400 V, 50/60 c/s. With pressing iron device -B/2 with 2 irons (without steam) electronic puller, for attaching coated...

...We process steel, stainless steel, cast iron, brass, aluminum, and many types of plastics. CNC Turning We process steel, stainless steel, cast iron, brass, aluminum, and many types of plastics. On our CNC lathes, various shafts and wheels are machined and prepared for the further manufacturing process of gearing. Here, workpieces with a maximum diameter of 700 mm and a length of 500 mm can be processed. We process steel, stainless steel, cast iron, brass, aluminum, and many types of plastics. Additionally, we are certified according to DIN EN ISO 9001:2008.

... good adhesion to the tool. The operating temperature exceeds 900 °C and has performance reserves that more than meet the demands of modern HPC tools. Number of teeth: 7 Helix angle: 35°/37° Variable helix: YES Pitch: unequal Tooth type: NS Cutting material: K40F Coating: TIXAL PRO Item (example): 290 37 07C...

... it the right machine for medium-sized and small thicknesses and diameters. Model variant: LT5 Processing: up to ∅ 120 mm Bar weight: up to 13.5 kg/m Loading length: 6.5 or 8.5 m Unloading length: 3, 5, or 4.5 or 6.5 m Fiber laser source: 1 or 2 kW Cuttable materials: Iron, stainless steel, aluminum, copper, and brass...

...Plasma, Gas, and Vacuum, Passivation (Corrosion Protection); Max. Usable Dimensions Ø 2900 x 5500 mm During nitriding, the surface layer of iron materials is specifically enriched with nitrogen or – in the case of nitrocarburizing – with nitrogen or carbon. This not only increases hardness but also enhances wear resistance, fatigue strength, and corrosion resistance. Additionally, the emergency...

...TüV Certified / TSE Certified / OSA Certified MAX 12,250 RPM 80 m/s Extra Thin/Economical/Smooth Cut/High Cutting Performance / Long Service Life Type 41 - Flat This thin metal cutting disc is a high-performance disc that offers comfort with its smooth cut for all types of iron and steel. Thanks to its thin and sturdy design, it allows for easy handling. Application areas: pipes, profiles, sheets, and general types of solid iron and steel. Advantages: • Economical • Smooth cut • High cutting performance...

...0200MZ Ersa 200, 200 Watt With the Ersa 185 PZS plastic welding machine, thermoplastic films, fabrics, and sealing profiles can be separated, welded, and sealed. When cutting plastic ropes, the ends are simultaneously welded, securing them against unraveling. Equipped with the welding wedge 0182PZ004, a holder 0A38, and a cleaning brush. Category: Soldering Accessories Power: 200 W...

... Swing diameter:mm 1,400 Turning diameter:mm 1,250 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,130 Machining height moveable crossrail:mm 1,120 / 1,560 Moveable crossrail stroke:mm 800 Step moveable crossrail:mm 100 Table diameter:mm 800 Table speed:rpm 800 Table drive power S1 100%:kW 51 / 71 Table torque S1 100%:kW/Nm 10.6 / 13.5 Table load max.:kg 3,500 Cutting...

...The sturdy and easy chamfering machine is designed for deburring and chamfering of small to large workpieces from 2 mm thickness. The sturdy cast iron casing, the hardened and sanded guide rails, the speed regulation and the integrated chip box convince in every regard. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant...

...Stationary stainless steel disc designed specifically for chop saw use. High zircon content. Iron and sulphur free. • High cutting speed • Long service life • Easy cutting...

...Whether it's pure 2D laser cutting of sheets or circuit boards according to your CAD data, or further processing in 3D laser cutting of finished assemblies. We manufacture according to your wishes and specifications.

...SDS drill bit for plus holder, 50 mm spiral length, 110 mm total length. Hammer drill with four spirals 4S EXTREM, highly wear-resistant XXL carbide insert. The double feed spiral ensures good transport of drill cuttings and a stiff tool with very high service life. -Material cutting edge: carbide, hard soldered. --For drilling in stone and concrete, iron reinforcement, masonry, granite.

...CLAMPING DEVICE: In non-cutting and cutting metalworking as well as in mold construction, clamping forces and precision are required that must meet the highest standards. We offer an exceptionally robust and versatile mechanical clamping element with the movable clamping device made of alloyed quenched steel, which achieves extremely high clamping forces of up to 25 kN.

...Polished or with AlTiCrN coating for aluminum, cast iron, and copper machining. - 2 cutting edges - Diameter range from 4 mm to 12 mm - Diameter tolerance 0 mm / - 0.015 mm - Free length L3 customized to customer specifications - Helix angle 30° / 45° - Protective chamfer or sharp-edged...

Since 1951, Frebel+Obstfeld has been producing sophisticated turned and tubular metal parts (AØ 2 - 60 mm) at two locations on 120 machines for leading manufacturers from over 30 countries. The majority of our products are used in the automotive, electrical and electronics, plastics engineering, as well as energy and plant engineering sectors. Our long-standing customers include Volkswagen, Siemen...

... cutting required, a very rigid machine is needed to absorb the rebound without damaging any equipment. Finally, the tolerances of the end product call for a very precise slide movement and low frame deformation. ANDRITZ Kaiser can look back on decades of experience in the field of blank cutting lines. Our well-designed and thoroughly tested concept allows our customers to manufacture high-quality products with maximum efficiency. Our production lines for circular or multi-form blanks are characterized by the following aspects: Highly stable machine with split-design cast iron or combined...

...Flanges made of cast iron or galvanized sheet metal for sensors with diameters ranging from 6 to 32 mm. Flange with counter flange made of cast iron for welding, featuring a gasket made of ceramic fiber. Gas-tight connections with threads from M8x1 to 5/4" made of galvanized steel or stainless steel, with gaskets made of Teflon, ceramic fibers, or cutting rings, for sensors with diameters from 1 to 32 mm.

...Professional Quality Textile Labels Material: Woven textile labels have a pleasantly soft surface and offer high wearing comfort without scratching. Labels with your own logo are made from 100% polyester - shape-retaining, colorfast, and particularly easy to care for. The name bands with your own logo are cut using a special hot cutting process. Therefore, fraying of the fabric edges is excluded. Care: Woven labels for textiles with logo - washable up to 90°C, iron-on labels - washable up to 30°C.

...Engineered for : • All-purpose use for construction steel, low-alloy steel, cast iron, aluminium, copper and bronze • Solid material in medium and large dimensions...

...EXCOR PERIGOL DW is a corrosion protection oil that contains solvents and is primarily used for the anticorrosive protection of ferrous metals, bare or partially galvanized steel, cast iron, and other types of metal. It has excellent "dewatering" properties (water displacing). On metal parts that have undergone previous machining processes with cutting fluids, EXCOR PERIGOL DW displaces moisture...