air treatment Germany

...The energy costs of a compressed air system are significantly influenced by the pressure drop caused during compressed air filtration. To maintain the required operating pressure, this pressure drop must be compensated for by correspondingly higher compressor performance. The consequence: increased energy demand, premature compressor wear ... and thus higher costs. The better solution: CLEARPOINT compressed air filters from BEKO TECHNOLOGIES.

... (industrial standard), allowing for control by a higher-level system. Device: PGS061P Max treatment width: 15 mm System dimensions (mm W x H x D): 470 x 210 x 530 mm Power supply: 230 V, 50/60 Hz Air consumption: approx. 30 l/min Compressed air connection: 4-6 bar Weight: 21 kg...

...The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance...

...Surface Treatment with Blasting Systems The blasting medium is accelerated using air pressure through a special nozzle system and blasted onto the workpiece surface. The adjustable impact energy removes contaminants, deposits, crusting, corrosion, scale, and paint. By choosing the right blasting medium, various surface qualities can be achieved. Even highly sensitive workpieces can be blasted...

...In the industry where heat treatment is required, IMH has been established for over 15 years and has equipped many systems with gas and air piping in collaboration with renowned plant manufacturers for several automotive suppliers, as well as in the ceramics and porcelain industry. These gas and air piping systems can be installed by IMH either in stainless steel or in the standard steel version...

...Exhaust Gas Treatment System "TWINN 10,000" for Industrial Exhaust Compliance with regulations for the extraction and disposal of solvent-containing, VOC, PCB, and dioxin-laden exhaust air. Modular complete solution for exhaust gas treatment without gas supply: - Compliance with regulatory requirements up to <20mg total carbon - Self-cleaning and self-regulating extraction technology for all...

For 25 years, Silcarbon, based in South Westphalia, has been producing highly specialized activated carbon for air, water, and biogas purification. Quality, service, and consulting are the foundations of our daily operations, with environmental protection always being our top priority. We tackle the challenges of reducing pollutant emissions and offer you a comprehensive concept for this purpose.

...Entrained solids are separated from the vapors in the wet zone. Moisture contents of less than 1% can be achieved. The residence time of the product typically ranges from 5 to 15 minutes. The excellent heat transfer rate to hot solids allows for the cooling of large quantities of solids in a compact machine without the addition of cooled air. When melting products such as urea, the particles are heated and melted within the dryer. Material: Stainless steel, Carbon steel...

... explosive zone 0, and can be used in applications in which an explosive atmosphere, arising from a mixture of air with flammable substances in the form of gas, vapor, or mist, is present. We offer ATEX-compliant controls for our explosion-proof design agitators. Talk to us and make use of our many years of experience on the topic of explosion protection. We will be happy to assist you! Our services in the field of explosion proof agitators...

...For the purification of exhaust gases contaminated with pollutants, we provide not only components but also systems for exhaust gas treatment. Pollutants: HCl, HBr, HF, HCN Chlorine and Bromine Ethylene oxide, Propylene oxide SO2, SO3 CO2, H2S Odorous substances Ammonia NO, NO2 Alcohols, Phenols Aldehydes, Amines Pollutants from flue gas Dust and aerosols...

Camozzi Automation GmbH is the German subsidiary of the internationally active Camozzi Group based in Brescia, Italy. The core business of the company – with locations worldwide – is the development, manufacturing, and distribution of pneumatic and electropneumatic components for industrial automation. The Camozzi Research Center was established for this purpose as a cross-functional institution a...

... a wide range of applications, be it water treatment, industry, agriculture, construction or other areas. They are delivered as complete units containing all the necessary components for efficient fluid delivery. Tailor-made configurations: We offer pump units in various configurations and sizes that can be customized to meet the specific requirements of our customers. From simple pump sets to complex multiple pump systems, we offer customized solutions tailored to individual needs.

... utilized. The cleaning takes place in one or more cleaning chambers, which can be arranged horizontally or vertically. Within the cleaning chamber, the exhaust air is sprayed with the washing medium in a counterflow system. Additionally, packing materials made of durable plastic, which are also located in the cleaning chamber, increase the effective surface area. Specifically tailored to your individual requirements, we offer everything from individual components to complete systems for your professional exhaust treatment.

Worldwide, industrial plants are supplied with gaseous media using AERZEN blowers and compressors. The innovative Aerzener machine technology is backed by 150 years of company experience. The product range includes rotary lobe compressors, rotary lobe blowers, turbo blowers, screw compressors, and gas meters. AERZEN blowers and compressors are quality-tested and certified according to DIN EN ISO 9...

...Compressed air is widely used as a drive and transport medium. Its various applications range from the automotive industry to steelworks and the food industry.

... to the current state of technology. Our exhaust air purification systems are designed as absorbent wet scrubbers or mechanically acting droplet separators. They ensure that a variety of potential pollutants are reduced to the legally required or operator-specified limit values.

...CONDITIONING & AIR TREATMENT PLANTS...

...The Defrost Damper (DeDa) is designed to close the fan of an evaporator or air cooler to accelerate the defrosting process. Made from NLW fabric, it ensures adequate coverage of the cooler and features a hydrophobic treatment to prevent ice formation. When the fan of the air cooler is running, the DeDa opens, allowing cooled air to flow freely into the room. The DeDa has only a very low pressure...

...Gas carburizing furnaces, gas nitriding furnaces, air circulation furnaces, tempering furnaces, protective gas hood annealing furnaces, heating hoods, chamber furnaces, continuous furnaces. For more information on heat treatment systems, visit our website! As unique as our customers' products are, we manufacture the suitable furnaces individually. From continuous furnaces for titanium parts just a few millimeters in size to shaft furnaces for shafts over 13 meters long. Each furnace is planned and manufactured individually.

...Main uses: Cosmetics, air freshening sprays, household cleaners, disinfectants, insect sprays, automotive care, etc.

... (e.g., sewage treatment plants), while painted or galvanized devices, including those with protective cages, are suitable for standard applications. Additional versions are available, and we are happy to provide our technical data sheets. The devices also come with the TR-CU certificate. Power: 500W - 3000W Voltage: 230 V Ex-Zone: Zone 1 / Zone 2 Temperature Classes: T2 / T3 / T4...

...Pressure gauges for maintenance units, pressure regulators and control panel installation, Fastening elements, linking accessories and brackets, containers, drainage valves, control magnets, Spare parts for compressed air treatment equipment...

...The low-temperature electric furnace SNOL 75/350 is designed for preheating and drying various materials as well as electrodes. The economical low-temperature furnace SNOL 67/350 is intended for heat treatment of materials up to 350 °C. This electric oven is suitable for drying, preheating, thermal testing, aging, and similar applications in an environment with natural air circulation. The oven...

...The test ink arcospray 38 is a test liquid with a surface tension of 38 mN/m. It was developed to quickly determine whether the surface is grease-free, as it can be assumed that grease-free conditions exist from this value. arcospray 38 can be completely cleaned off after application using blowing air (compressed air). Tested parts can be reused. Not only large areas, but also very small areas, such as chain links, can be easily and quickly assessed using arcospray 38.

... himself, is moldclean, a compact appliance which cleans polluted cooling channels in injection moulds and heat exchanger systems. Technology:water,solvent,compressed air Field:process,for injection molding,for plastics Other characteristics:compact,cleaning,continuous,robust,for cast parts...

...• Compressed air filters and pressure regulators (G 1/8 to G 3) • Filter regulators and maintenance units (G 1/8 to G 1 ½ or G 2) also available in stainless steel!!! • High-pressure filters up to 60 bar • High-pressure regulators up to 270 bar • Fine and low-pressure regulators • Precision pressure regulators • Control combinations...

...Compressed air blasting can achieve a wide range of results. This method is used for rust removal, paint stripping, cleaning, or for decorative purposes. The D&S Group brings together three flexible, customer-oriented specialists under one roof. Each has a clear focus – sandblasting, surface treatment, and blasting technology – and is closely interconnected with the others to leverage mutual synergy effects.

...The fleece is made from shatterproof, thermally bonded synthetic fibers. Particles harmful to paint >10μm are 100% captured through an optimal fiber combination and the adhesive-active treatment. The EV ceiling filter also meets the high quality standards of the automotive industry. The clean air side polyester fabric increases the stability of the filter mat and protects it from dust breakthrough and potential injuries during installation. The optimal separation performance of paint-damaging particles is maintained even under higher temperature exposure.

...With our new Steam-Catcher technology, we can offer a 100% exhaust-free vapor condensation. Due to the targeted treatment of the vapor, the usual losses of heat and water are a thing of the past. There is no release of residual air into the hall or 'over the roof'. The environment around the cleaning system remains dry and is not additionally heated. This system can also be retrofitted to all continuous cleaning systems. We also offer different operating variants here. The execution is always determined by the operating conditions of the cleaning systems.

...No Chance for Adhesive Dusts It has long been known that water- and oil-repellent treatments enhance the anti-adhesive properties of filter media. In cases where such standard treatments are insufficient, GUTSCHE offers antafin®, a unique, highly effective anti-adhesive treatment.