test station Germany

...Test Stands for: Research/ Development Series Production (Inline or Single Station) Fefler GmbH has years of experience in building test stands for research/development and for monitoring series production. Series test stands can be executed as separate test stations or integrated into the production line. Our test stands are in use by customers from various industries worldwide and impress with their high quality and durability. We specialize in: - Component test stands - Valve test stands - Performance test stands for pumps - and motors...

...A total of 20 trays can be manually loaded into the palletizing system. Robot 1 picks up the trays and places the test items on the rotary table. Robot 2 removes the test item from the rotary table and places it in the leak testing station. Robot 3 takes the test item from the leak testing station and places the approved test item back in the tray. This tray is then automatically transported to...

... Inclination angle:15° Thrust and pullback force [kN]:43 Max. torque [Nm]:1.300 Max. spindle speed [rpm]:230 Pilot bore Ø [mm]:80 Drill rods Twin Drive Ø [mm]:48/38 Effective rod length [mm]:1.500 Upsizing Ø* [mm]:≤ 250 Outer pipe Ø* [mm]:≤ 160 Bore length* [m]:≤ 100 Min. bore radius [m]:25 Max. driving speedt [km/h] 2 stages:Friesh water tank [l] Friesh water tank [l]:Super-silenced [dB(A)] Super-silenced [dB(A)]:82,5 Max. engine output [kW]:28 HP Bentonite pump [l/min]:test...

...Our services •Layout creation •Material procurement •SMD assembly •Manual and semi-automatic •Mounting •Reflow and wave soldering •Selective soldering •Automatic Optical Inspection (AOI) •X-ray inspection •System assemblies •In circuit tests and •Function test •Revision and repair •Rework Station •Short delivery times ...

... measurement setup, including the wiring harness, or if you prefer to have individual components manufactured precisely according to your specifications and technical data. In any case, you will receive: - a customized measurement station - a measurement setup (also usable in vehicles) tailored to your requirements - for endurance testing - for EMC measurements - a conventional / functional measuring instrument setup and thus a solution that leaves nothing to be desired in terms of technical, qualitative, and aesthetic aspects.

... reverse gears Labyrinth-sealed gears with a degree of efficiency of > 98% High temperature gears for ambient temperatures of up to 300°C Saw drive gears Test station gears with output speeds of up to 12000 min -1 Double gears with two transmission ratios Robotic gears Spur gears High precision gears And much more...

...Control station for the operation of the dynamometer and the engine and for the development of programs. The development of test programs does not require programming experts. The transitions between manual control and program execution are easy and safe.

...contactless and Dual Interface IC modules can be executed with the highest performance and yield by processing of up to 128 modules in parallel. In addition to basic test and parameter test, software is also available for chip module initialisation, personalisation, and OS loading. Integration of SAM, HSM, or similar modules can be realised easily. Using high-end reader technology from Smartware or Micropross, this automatic IC module test handler offers unmatched performance for the complete production test of smart card and RFID modules. Flexible reel to reel system for high-speed test,...

...SMD/THT/mixed assembly, manual soldering, optical and, if necessary, functional testing for assured quality, prototype manufacturing, component procurement/storage Engineering: Circuit design, layout, test stations Prototyping and series production SMD and THT assembly, manual soldering LabVIEW-based test software development Flexibility: short response and processing times Quality inspection...

... load) - All components for a meaningful test included in the set Contents: - 25x Test cassette - 25x Reagent tubes with solution - 25x Sterile swabs for short nasal swab - 25x Sterile swabs for nasal/throat swab - 1x Test station - 1x Instructions for use...

...Attachment for Pressure Testing of Test Specimens We offer burst testing stations to evaluate the load-bearing capacity of pressurized elements. The components to be tested are subjected to pressure until they burst. Depending on the requirements (e.g., based on medium, pressure range, static or pulsating tests), we build your custom testing station.

...The Transponder Test & Packaging System TMS measures, sorts, and packages glass transponders into desired packaging units. The finished transponders are individually transported to a sorting station via a feeding system. There, each transponder is read by a reading antenna from a defined distance. Defective parts are sorted out, while good parts are grouped into programmable packaging units. An Excel file is generated from the read data of the individual transponders, along with the batch data and the serial number of the packaging unit.

... of different devices to each other and thus provide doctors and therapists a holistic impression of the patient. External systems proxOS works just as smoothly together with the proxomed devices as with external patient management systems, such as Theorg (THEDEX interface) or hospital information systems (HL7 interface). proxOS connect functional modules The proxOS connect functional modules are the link between the central management and the various system components. In the process, all test and training results are saved centrally but are then made available for further processing in...

... modular construction allows them to be re-used later for a new conveyor path. Technical data: —Conveyor body material: stainless steel —Chain width: up to 1400 mm —Conveying speed: up to 80 m/min Optional equipment: —Centre drive+ automatic tensioning station —Retracting end —Hinged nose —Chain washing station —Moving deflecting pulleys —Product guides, fixed or adjustable, design depending on product —Supports to stabilise the conveyor systems at the desired conveying height —Other accessories, such as sensors, stoppers, etc.

... complete system is delivered pre-assembled hydraulically and electrically. Material: Steel S235JR (raw inside, primed outside) including insulation: 120 mm GREEN LINE insulation applied to 100 mm, 100 mm lid insulation, and 5 mm foil cover in RAL 9006 Silver or RAL 9010 White, removable Operating pressure: max. 3 bar Test pressure: max. 6 bar Temperature: max. 95 °C Equipment: 1 smooth tube heat exchanger for solar with 1 inch internal thread, return layer pipe for temperature-dependent layering of the heating return, layer separation plate and layer guiding sheets, sensor rail under...

...Reliable Opto-Electronic Characterization for DC and RF Values The opto-electronic test station NanoTest PIC HD complies with all requirements for the testing of high-density photonics integrated circuits, such as silicon photonics structures or active PICs. Probe cards with up to several hundreds of contacts provide the connection for DC and RF measurements.

... fully rugged outdoor tablet on the go or as a full-fledged tablet PC at work with keyboard and all ports for peripherals. The housing is made of a special plastic with IP65 protection class, which protects the TAB R11 against water jets (water from all directions) and dust penetration. With MIL STD-810G, the tablet was subjected to a shake and vibration test for off-road vehicles and agricultural machinery, as well as drop test from 1.22m height on a hard plywood board. ...

... there is the optional test-weight lowering. The optional re-cooling device is able to reduce the oil re-cooling time as a result of which high test-rates are a possibility. The advantages included here are that the tests possible to the standards of ISO 306, ASTM D 1525, ISO 75 and ASTM D 648. Key Advantages and Features: - Measuring station lowered automatically - Optionally available...

... prior to the forming station and remove them if they fail. Because the CO93 only accepts components on tape, either reeled or ammo pack formats are acceptable. Also because of its flexibility, the CO93 allows the processing of components taped on 12.7 mm and 15 mm spacing by using easy- to- change tape guides and tools. Components...

...Characteristics: - Highest dosing accuracy - Precise closure parts assembly - Flexible servo drives - Turning station with torque control - Greatest possible efficiency - fAccurate transfer at discharge Options: - f100% leak test - Check weighing - Automatic sorting and feeding systems - Die-cut module for lid - Gassing - Ultrasonic sealing - Laser coding - Container cleaning Output::up to 300 Pieces/min Container diameter::between 20 mm and 67 mmDosing range: Dosing range::between 1 g and 18 g Basic measurements approx. (LxWxH)::5,400 mm x 1,750 mm x 2,550 mm...

...easy-dok Documentation Software (Pro Version) for Pest Controllers #rat bait station #rat bait station channel #rat bait box #rat bait #rat bait box test #rat control #rat control costs #rat control agents #fzv30 #fzv rat bait box #rat trap #rat trap bait #rat traps #buy rat trap #rat bait box #rat bait boxes #rat bait test #buy rat bait #bait box #bait box rats #bait box mouse...

...• Automatic shock test and calibration station (accessory) • Leak detection from PPM to volumetric gas with ultra-fast PPM response The GT series is designed for the gas industry and meets all the requirements of maintenance technicians in a single unit. The seven operating modes include: leak tests, entry into confined spaces, borehole tests, carbon monoxide, cleaning, leak sniffing, and...

...Embossing Vice - Embossing jaws with support strips 3 mm - Pneumatic-hydraulic pressure converter (1-360 bar) - Pneumatic switch for hand or foot operation - Test stones for checking the wear of the embossing jaws - Scaled workpiece stop - Protective shield Art. No.: 41200 Max. embossing width: 245 mm Embossing jaw type: Standard embossing jaws for material up to 35 HRC Weight: 76.0 kg...

...Integrable into Your Production Processes The inline testing systems from GEORGII Automation are suitable for the calibration, adjustment, and temperature compensation of pressure sensors, pressure transducers, and process transmitters in series production. The testing systems can optionally be expanded with an autofrettage station, a vacuum station, or an additional temperature range.

... headquarters in Bergneustadt. This consolidation of all competencies ensures that all our systems, from the display module to the control hardware and software, are optimally coordinated. Our production includes: - Implementation of custom designs - State-of-the-art construction - Automated coating of our SMD modules - Automated profile processing center - Screen printing system - Digital printing - Punching machine - 100% Burn In Test through our quality management...