electrical system assembly Germany

...Whether manufacturing through fully automated SMT assembly lines or manual tasks – everything is done with precision. Throughout the entire manufacturing process, a PPS system ensures adherence to short lead times, coordination of the schedule, and efficient use of resources. To guarantee uniform and consistent quality, production is carried out exclusively according to ISO 9001:2008.

...Workpiece carrier system as a connection between screwing, turning, testing, and palletizing units...

... without affecting the connected units. Further assembly variants on request. Equipment:Schuko, RJ45 double Design:square Ground:Screed Protection:IP20 Material:Aluminum, Stainless steel Color:Stainless steel Surface:sanded...

...Kuka, Hanwha, Fanuc. Functionality Due to the simple connection of the screwdriver and the operation and programming via the own URCap (only applies to Universal Robots) the grippers are ready for use in the shortest time. In addition, the connection time is reduced by the OnRobot quick-change system Quick Changer and Dual Quick Changer. Torque range:0.15 – 5 Nm If the torque < 1.33 Nm:0.04...

...This battery system allows the assembly of a series of solenoid valves type VY in 1/8 with various functions. The electrical control is integrated in the housing and equipped with a 25-pin SUB-D connector. The valve terminal can be preconfigured and ordered fully assembled and tested, or, thanks to the very simple, intuitive coding, you can assemble it yourself on the basis.

...The focus is on the development of customer-specific and holistic system solutions, closely integrating hardware and software up to series production. Hund develops, designs, and manufactures electronic assemblies, high-quality devices, and systems - both on behalf of customers and for its own products in the fields of environmental measurement technology, microscopy, and medical technology. For this purpose, we have access to modern layout and development tools, SMD assembly machines, reflow, selective, and wave soldering systems, as well as assembly and mounting stations.

... components. We are UL and UL-NRBX certified for plants and systems located in North America. We create an E-P&ID diagram for each plant or system. This makes the relationship between electrical and mechanical components transparent and simplifies maintenance and troubleshooting. Our circuit diagrams are drawn up in accordance with the VDE0113/EN-60204-1 directives or - for the North American market - in accordance with the NFPA79 and UL508A directives. The electrical documentation is available in all common foreign languages.

...Construction, Installation, Commissioning: When the cooling water systems reach a certain size or capacity, IKS provides modular, prefabricated components. The final assembly of the elements takes place on-site. Piping and electrical installation are carried out at the construction site. Your benefit: short assembly times due to precise planning and predefined installation situations. Design, construction, and service from a single source. Do you have questions about project planning, services, and conditions? We will promptly send you your individual offer.

... - Indoor and outdoor applications without direct sunlight - Rack handling devices, machining/tool machines, fast handling, clean rooms, semiconductor assembly, indoor cranes, low-temperature applications Bending radius energy chain: 6.8 x d Free-hanging travel speed: 10 m/s Sliding travel speed: 6 m/s...

...Maximize space utilization with minimal assembly effort – With the legendary Wichmann WD90, fire protection becomes a breeze.

... cables with connectors into housings - Tool-free entry and connecting technology for machines and equipment - Temperature range -30 °C to +100 °C - Protection grade IP65 - UL 514B - 12 different frame combinations with 16 sizes of grommets (accessory) - Click-in assembly at wall thickness from 1,5 - 2,0mm - For walls with thickness larger 2,0 mm the KADL can be fixed with standard screws Protection grade:IP65 Temperature range:-30°C to +100°C Material:Polyamide, TPE...

...Quick assembly and optimal storage Modern machines currently contain numerous electrical, data, and control cables, as well as pneumatic hoses, with the total length quickly reaching several thousand meters for large installations. Cable ducts allow for the organization of these many cables and simplify assembly. The BLOCAN® aluminum anodized cable duct system impresses not only with its...

...The AIRPURION 300 active consists of a complete housing made from stainless steel 1.4301. Wiring system and the electronic cut-in unit are integrated into the frame. The air is guided along the PURION UV-lamps inside the housing via fan. Scope of delivery of an AIRPURION active plant also contains a mounting rack or a wire suspension for assembly. advantages: continuous operation, even if...

...aluDISPLAY is a display enclosure available in three widths, with a modern design and well-thought out product features. Ideal for electronic controls and operating units with flat modules. Assembly or removal of the enclosure is extremely quick thanks to snap-on covering profiles. An internal profile slot enables circuit boards to be easily inserted or for system components to be directly...

...Alongside the standard ICT/FCT process, we can also target every individual production stage for verification, as requested. Efficient inspection strategies and final functional tests are a fixed component of our quality management system. For components of the most varied shapes and with diverse electronics components, we will set up our AOI stations according to individual needs and provide reliable optical control of the overall assembly. Automatic optical inspection of your components is naturally part of our service range.

... Procurement of installation materials Installation of cable ducts and cable trays Wiring of the system Comprehensive acceptance of the electrical system including test protocol Support in creating the risk assessment We would be pleased to provide you with a non-binding offer or be available for personal consultation.

... resolution of 0.1 sec Remote control with push button reset for in-chamber event timing. Electrical gas shut-off solenoid Gas control system Flame confirmation kit (ASTM D5207) Black interior finish Performs all UL 94 tests (Except Section 10.0 Radiant Panel Test) Bench top chamber (Volume greater than 0.75 m 3) Tirril Burner Multi-directional specimen and burner positioning apparatus Quick release...

... headlights, bonnets, sliding roofs, boot lids and locks as well as wings. Our embossing punching machines are suitable for single-layer steel and aluminium sheet metal. This offer includes: • Embossing punching frame (assembly elements or components can be perfectly aligned to a mating part of different dimensions) • Handling: robot-guided via defined interfaces (mechanical, electrical, pneumatic...

...The assembly of these systems requires precision and a complex understanding of both mechanical and electrical engineering. Years of assembly experience enable us to take on the assembly and relocation of testing systems internationally. We specialize in the following systems: Acro Dyne, ASTEC, Uniformity, Dynamic Balance, X-Ray We offer you your project solution, all from a single source...

... management software, assembly, commissioning, and subsequent system maintenance. Feel free to contact us! We will find the right solution for you. We have already implemented solutions for many industries. Don’t hesitate to reach out to us! Do you want to adapt your existing intralogistics to new challenges? We are happy to provide you with advice!

...Assembly manufacturing is a complex process that requires extensive experience. in-Tec Bensheim has specialized as a system supplier and contract manufacturer in the assembly of electromechanical components such as relays, power supplies, or connectors. The production of ready-to-install and sensitive components like sensors or circuit boards is also part of our product range, which we manufacture as a certified production service provider for our customers.

...Laser marking system for labeling your products made from various materials - complete system from a single source: — from the construction of the laser cell to the integration of your desired KEYENCE laser — autonomous and powerful solutions for laser marking of individual parts and small batch sizes — assembly/setup directly on existing workbench or on a mobile frame — state-of-the-art 3-axis...

...Assembly plant for electrical components...

...Our specialized personnel have access to modern assembly stations as well as spacious and well-structured storage areas. This is how your individual parts are transformed into high-quality assemblies – mechanical, hydraulic, pneumatic, electrical, and even combined systems. According to your specifications and quality guidelines, we assemble components and technical devices. This includes precision assembly, commissioning of components or systems, necessary functional and quality checks, and secure packaging for transport. Our quality management system is certified according to DIN ISO 9001.

... housing - Peak load 150% - Tested according to UL 508 for industrial system controls - Active DC Power OK signal output - EN 61000-6-2 (EN 50082-2) - Power consumption in no-load operation: < 0.75 W - Wide input range AC 88 V to 264 V, DC 127 V to 370 V - Permissible ambient temperature: -40 °C to 50 °C Item No: 27893 Manufacturer No: NDR-240-24 Number of output voltages: 1 - Single Output connection: Screw terminal Input connection: Screw terminal Design: DIN rail Protection class: Protection class I...

...The Cleco Screw System ® NeoTek™ is the next generation of intelligent tool solutions. The tools from the NeoTek 30 & 50 series feature angle heads designed for 1 million cycles without maintenance and offer a market-leading repeatability of 2.0 Cm/ Cmk at +/- 7%. The NeoTek tool cable incorporates the industry's first quarter-turn locking mechanism, eliminating one of the most common causes of...

...The 'First Article Inspection' is one of the most important steps in the PCB assembly process.

... recommended here. It is beneficial to have decision-makers and experts working together "under one roof" to achieve optimal implementation and understand the sophisticated technology within a control cabinet. Whether it involves scheduling or procuring individual components, mechanically processing them, or bringing the assembly, installation, and wiring to life, every outcome is realized professionally and with enthusiasm. CTMT takes it upon itself to ensure the overall result is backed by comprehensive quality testing in accordance with VDE standards.

... • Highest quality standards • Manufacturing according to all common standards, e.g. VDE, EN, UL, NEMA, CSA, Norsk Veritas, also in stainless steel or Ex versions • International documentation according to industry and corporate standards • Plant simulation / system testing • Engineering support • Assembly and commissioning support • 24-hour hotline service / spare parts service We advise you on optimizing your control cabinets in terms of cost, user-friendliness, maintenance, energy efficiency, and integration into an energy management system.

...Whether it's a single control cabinet or a complete switchgear system, we are your partner for control cabinet construction! No matter if it's assembly of components with: - Switching, control, measurement, and regulation technologies, - Low-voltage distributions, or - Reactive power compensation systems, - As well as junction boxes and control panels. We manufacture your switchgear according...