structural fire protection Germany

...Fire protection technical statements and fire protection concepts according to the requirements of the state building codes According to the requirements of the state building codes as well as the building template and building inspection regulations of the states, fire protection concepts and evidence are required for certain construction projects and uses. Within the framework of the fire protection concepts, requirements for preventive fire protection, such as structural, technical, or operational/organizational measures, as well as measures for defensive fire protection, are evaluated.

... prescribed by the system manufacturer. They are intended to prevent the spread of fire and smoke according to their fire resistance duration in the event of a fire. Fire protection closures must be tested according to DIN 4102, DIN EN 1634, or DIN EN 1364 and must be generally approved by the DIBt (German Institute for Structural Engineering). The fire protection suitability of the fire protection closures must be demonstrated through usability certificates and conformity certificates.

...Structural Fire Protection, an important topic that increasingly applies not only to new buildings but is also being demanded more for renovations of existing structures. HOENIG carries out structural fire protection work according to DIN 4102 with experienced staff. Professional advice on legal requirements or necessities is just as standard as expert opinions from an affiliated consulting...

...Planning and consulting services related to preventive structural fire protection Preventive structural fire protection often raises tricky questions. That’s why the fire protection specialists at EAS are the right contacts for you. Benefit from our comprehensive services from a single source: - Qualified fire protection expertise - Competent consulting - First-class customer support...

...Fire protection for joints tested according to European standard EN 13501-1 with fire resistance class EI 120. Litaflex-Vario is also suitable for joints that are subjected to very large movements. This allows it to withstand even significant structural movements while reliably maintaining its fire protection properties. Applicable in solid components made of aerated concrete, concrete, masonry.

...Approval Number ETA-12/0118 Type of Seal: Joint Seal Fire Resistance Class: E15, E20, E30, E45, E60, E90, E120, EI15, EI20, EI30, EI45, EI60, EI90, EI120 Components: Solid Walls, Solid Ceiling Test Standard: EN 1366-4 Type of Seal: Joint Seal Components: Solid Walls, Solid Ceiling...

...Sealing solutions and fire-tested fastening technology for structural fire protection in technical building equipment (TGA). Products for pipe and cable sealing, as well as for smoke-tight, fire-safe, and sound-insulated closure of penetrations and component joints.

...Self-adhesive, flexible pipe protection profile made of PU-foam. Marks and protects danger spots. • Self-adhesive, flexible pipe protection profile made of polyurethane foam. • For indoor use only • Suitable for pipes or cables with a diameter of 20 mm - 40 mm that are placed near walkways for structural reasons. • Ideal for use in manufacturing, shipping department and warehousing, stairwells or...

...The rheological and mechanical properties of the end product, as well as structural fire protection, are of primary importance. Capsil® clay powders for the building materials sector are available in standard grinding fineness with a wet sieve residue of 63µm of a maximum of 2%. Various color variants are also possible. Capsil® is provided as needed, either in bulk in silos or packaged in 25 kg paper bags as pallet goods (1 ton) or in BigBags.

...Fire-resistant construction core made of stone wool for the production of fireproof building structures. Contoured fiber core based on basalt for use as fireproof material and sound insulation. Areas of Application — Fire protection in the construction industry and mechanical engineering — Thermal insulation — Sound insulation Properties — 100% natural and inert — non...

... per day. This means a continuous load on the cable technology – and that for years. Therefore, the cables used must be robust and wear-resistant. Furthermore: High demands regarding personal safety. A significant role here is played by structural fire protection, with particularly strict regulations concerning the permissible materials. On the other hand, safely wiring elevators means much more than just ensuring energy supply while adhering to fire protection standards.

...Tobias Hößler - Expert in Electrical Engineering If you have an issue in my field and require an expert report on potential damage pathways, valuations, or causes of malfunction, I can provide you with a thorough and certified report tailored to your specific problem, drawing on my specialized knowledge and experience in electrical engineering and structural fire protection, along with relevant...

... industrial insulation. For many years, stove builders both within and outside Europe have relied on the SILCA® 250KM calcium silicate insulation board. The German Institute for Structural Engineering in Berlin has issued the general building authority approval No. Z-43.14-117. The measurement results for determining the equivalent thickness according to the technical rules of the stove and air heating trade can be found in the following diagrams. SILCA® 250KM is a true European champion. In addition, it has received the Swiss fire protection approval No.

... around 95 - 99 % molten rock, and pulled into threads to obtain a fibrous structure. The fibres are evenly distibruted to ensure that the shear strength is kept constant. Rockwool panels are used in areas where fire protection requirements are needed. The rockwool panels can be installed either as an internal / external firewall, suspended ceiling, and as a roof structure. These panels can be laid...

...THE ALL-IN-ONE FLEXIBLE FIRE BARRIER FOR CONDENSATION CONTROL MATCHING ARMAFLEX AT PIPE PENETRATIONS With the new Armaflex Protect penetrations for both non-combustible and combustible pipes can be sealed off more simply than ever before. Whether in ceilings, solid walls or lightweight walls, Armaflex Protect guarantees reliable fire protection in all structural elements without any complicated...

...Smoke protection elements are tested according to DIN 18095. Fire protection closures are tested according to DIN 4102 and/or DIN EN 1634 and are approved by the German Institute for Structural Engineering in Berlin.

... sealants are nearly universally applicable in the construction sector for their intended purpose. Depending on the application, special cleaners can be used to improve adhesion. Materials based on PUR, MS polymer, acrylate, neoprene, tetrahydrofuran, SBR, cyanoacrylate, epoxy resin, injection resins based on epoxy foam, gypsum board filler, and polyacrylate for fire protection applications are utilized. Surfaces should be clean and dry, and loose parts as well as dust should be removed as much as possible.

...Sailcloth connectors/compensators are used for decoupling structural noise, as expansion joints for fans, air conditioning units, air ducts, and for connections to fire protection dampers. The fabric used is directly pressed into the air duct profiles using pressure bonding technology. Sailcloth connectors/compensators SQUARE: Design: Fabric inserted into air duct profile Profile: 20 / 30 / 40...

...Steel and fire protection doors are used in private, public, and industrial sectors. Multipurpose doors in steel and stainless steel, as well as other variants such as those with tube frames, allow for individual adaptation to all structural requirements. Various glazing forms, transformer room grids, and ventilation grilles meet diverse functional and aesthetic demands. Additional safety features provide extra protection.

The svt Group is one of the leading manufacturers of state-of-the-art fire protection products and systems, offering comprehensive services in passive fire protection and damage restoration. Through continuous research and development, svt ensures an innovative range of products and systems for passive structural fire protection and industrial fire protection applications in the transportation sector, as well as methods and services in passive structural fire protection and damage restoration. With numerous branches in Germany and international partners, svt is always close to the customer.

...Based on your needs such as product requirements, throughput capacities, structural conditions, etc., we create the plant layout. In doing so, we take into account the legal requirements (fire protection, safety standards, etc.). We determine the necessary transport speeds as well as the required process and energy parameters for you.

Fire extinguishers, wall hydrants, smoke and heat extraction systems, burglary alarm systems, electronic security systems, fire alarm systems, property protection systems, fire protection gates, power-operated gates, door hold-open devices, structural fire protection, fire protection training...

Core drilling with diamond tools, structural fire protection according to DIN 4102, fire protection, sealing, and consulting.

Expert office for preventive and structural fire protection, fire protection concepts for special buildings, authorized proof providers according to NBVO.

... supporters since then. Since 2002, the second generation, Ursula Hillebrand and Georg Wichmann, has been active in the company. The family-run business now deals with structural fire protection, in addition to fire stopping systems, with acoustic penetrations, custom-made fire protection insulation packages, molded parts made from various intumescent materials, "Palusol" strips, soundproofing mats...

...Maintenance and inspection of fire extinguishers, smoke extraction systems (RWA/NRA), fire doors, hold-open devices, wall hydrants, above-ground hydrants, riser pipes, trading in fire extinguishers and fire protection items, smoke detectors, signs, first aid, fire brigade supplies. Installation of smoke and heat extraction systems in stairwells, escape route signage, pictograms ISO 7010, industrial supplies, structural fire protection, consulting, refilling of fire extinguishers, gas detectors, radio-connected smoke detectors, installation.

... partner for all areas of structural fire protection that we cannot cover ourselves. Fire Protection – Precise and Effective with KCS Fire Protection! Since 1992, we have been offering our clients in the entire Rhine-Main area competent consulting, planning, and installation in the field of structural fire protection. The systems in our service portfolio are tested according to DIN 4102 and meet the...

... concerns a listed building, public institutions, industry, private companies, new constructions, or renovations. We create solutions even for complex and unusual requirements of structural fire protection. In this regard, collaboration with qualified fire protection experts as well as the know-how of our partners and suppliers is essential for us. Our area of operation is nationwide in Germany...

The aim is to be involved early in the development process to find optimal structural and fire protection solutions in close collaboration with the respective specialist designers.

Formtec — Technology for Construction Systems Since 2001, we have been customizing and producing special products for dry interior construction, focusing on room acoustics, structural fire protection, and special applications in drywall construction. We are independent in our selection of raw materials, allowing us to freely combine a variety of materials. Our experience and long-standing good relationships with the industry help us develop products that are truly unique.