stainless steels parts Germany

...Turned parts, CNC turned parts, long turned parts Part diameter: 0.3 to 200 mm Parts Length: 1000 mm Materials: steel, stainless steel, brass, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

...stainless steel: 1.4305, 1.4301 Materials used: automatic steels, brass, stainless steel: 1.4305, 1.4301, heat-treated steels, aluminum. Possible finishes: galvanizing, nickel plating, chrome plating, bluing, anodizing. Possible heat treatments: hardening, induction hardening, case hardening, nitriding, annealing. We process diameters from 3 – 15 mm and lengths up to 120 mm. Batch sizes from 30,000 pieces to 2 million.

...Turned parts Long turned partes, small turned parts Turned, milled and grinded parts Thread inserts in brass, steel and stainless steel Possible materials: Alloy AlCuMgPb, AlZn5,5MgCu etc. Brass CuZn39Pb3, CuZn40Pb2 etc. Stainless steel 1.4301, 1.4305, 1.4571, 1.4401, 1.4101 etc. Steel Machining steel, St52, St37, C45, etc. Special steels Titan, Hastelloy, Copper, Bronze etc...

... specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

... supplies. They were manufactured from various tool steels. It is worth noting for size comparison that the part in the front left (fanfare) has a length of 45mm. Next, you see some stainless steel parts from the decoration supply sector, such as fasteners for advertising and information signs made of acrylic or handles for the furniture industry. The last image shows a turned part made of stainless steel with a diameter of up to 50mm and a length of 300mm.

...Mechanical processing of aluminum parts, our strengths lie in development, design, and manufacturing. Mechanical processing of aluminum parts, we process over 2,500 tons of aluminum and stainless steels annually into quality solutions. Our production ranges from prototype manufacturing to small series and even the complete annual requirements for individual customers.

...Our combined turned-milled parts which are produced fully automatic on CNC machining centers are used in general mechanical engineering and actuator systems. Dimensions:Workpiece diameter: max. Ø 65 mm Dimensions:Workpiece length: max. 185 mm Batch sizes:Medium size series Batch sizes:up to large series Materialien:POM Materialien:Aluminium Materialien:Brass Materialien:Steell Materialien:Low-alloy stainless steels...

...We take the right turn! In the area of ​​turning technology we can offer you a spectrum of prototypes, zero series and small series as well as the production of large series as a powerful partner. We process all materials, e.g. Such as automatics, tempering, stainless steels, aluminum, brass, copper and more! Max. Diameter when working rod and / or coil: Ø 65 mm Max. Diameter when machining sections: Ø 380 mm Max. Working length: 500 mm All common heat- and surface- treatments possible Assembling and more…...

...electrical enclosures, and laboratory furniture. Complex inward and outward flanges can be accommodated with custom made tooling pieces. A wide range of materials can be welded, including Stainless Steel, Carbon Steel and Aluminium. Complete welded parts do not require any costly grinding, polishing or blending thus greatly saving on manufacturing costs. Pneumatic safety clamping system :No need for post weld grinding and polishing welded sheet metal plates with a 90° joint:max. welding length: 300 mm or 500 mm ...

... • Average roughness value Ra 0.1 µm or even less Materials suitable for polishing include chromium-nickel steels, such as 1.4301, 1.4306, 1.4401, 1.4404, 1.4435, 1.4436. The electropolishing capability and the polishing result depend on the shaping and pre-treatment of the parts to be processed. We are happy to advise you on the various possibilities.

... Miele and other global brands. Craemer factory: - steel sheet, - high-strength steel sheet, - stainless steel sheet, - aluminum sheet Manufacturing processes: - Hydraulic and mechanical presses with servo and transfer technology - The most modern production equipment for the manufacture of subassemblies. - Compression force ranging from 3,150 to 25,000 kilonewtons - Table lengths reaching up to 8,000 millimeters...

...We stock over 25,000 items in our extensive standard parts warehouse, covering more than 2,500 square meters. The range of materials includes automatic steel, high-strength materials with strengths from 8.8 to 12.9, stainless steels, brass, and plastics. Surface treatments such as galvanic zinc plating, hot-dip galvanizing, nickel plating, zinc coating with thick-layer passivation, and zinc...

... the world. We supply knives as original equipment, or as replacements for parts subject to wear in normal operation, for the: - Automotive industry - Printing industry - Electrical industry - Cable assembly - Plastics industry - Food production - Paper industry - Recycling machinery - Cutting plotters - Special engineering - Textile machinery - Packaging machinery High tool lives: We achieve this aim by using many different steel qualities, such as high-alloy tool steel, HSS, stainless or powder metallurgy steels. For special requirements, we can tip knives with tungsten carbide or...

...forming capacity Steel 400 N/mm²: 2.0 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.5 mm Contact us for a customised offer, tools included! Technology:Forming Drive:Pneumatic Type:Stationary Target sectors:Automotive, steel + metal working, school, trade, lighting, restorer Material:Aluminium, steel, stainless steel...

...In order to be able to benefit from the excellent strength values of carbon steels in a heavily corrosive environment – in comparison with expensive stainless steels – Zinc Lamella Coating can be used. Our Zinc Lamella Coating generates the so-called cathodic protection. The more ignoble zinc “sacrifices” itself to protect the base material. Steel can be protected in this way. The layer...

... - Rolling mills - Pre-filtration in ultrafiltration - Solid recovery - Thickening - Fractionation Throughput Capacity By combining any number of individual ZYKLOMAT® hydrocyclones in elongated or round distribution units, all desired throughput capacities can be achieved. Materials Elastomers, Plastomers, Stainless steels Advantages of Hydrocyclone Systems e.g., in coolant lubricant purification (emulsion) - High, optimal filtration degree - separation particle size approx. 5 µm. - Separation of magnetic and non-magnetic particles. - Uniform, constant,...

...Our product range includes high-precision stamped, bent, and drawn parts, as well as stamped grids made from unalloyed steels, stainless steels, non-ferrous metals, their alloys, and special alloys in material thicknesses ranging from 0.05 to 6 mm. We manufacture series productions, small and micro series, as well as prototype parts for product development, delivering them as needed in bulk, in...

...We have multi-spindle and CNC lathes available for the production of our turned parts. We have multi-spindle and CNC lathes available for the production of our turned parts. The processing of stainless steels, free-cutting steels, brass, aluminum, heat-treated and case-hardening steels is carried out using six and eight-spindle automatics in the diameter range of 6 to 50 mm. With the help of...

...G.RAU manufactures closely toleranced parts from round wires using cold flow forming on multi-stage presses, utilizing materials such as copper, copper alloys, steel, and stainless steels. The geometries and part volumes are optimized to enable production without material waste. Flow-formed parts thus represent a cost-effective alternative to turned parts. We adjust the materials and dimensions...

...We manufacture versatile wire bending parts, pipe bending parts, and stamped bending parts for automotive manufacturers and suppliers or system providers. This includes various wire bending parts for seats, such as Isofix, exhaust systems, bodywork, as well as convertible roofs with wire diameters ranging from 0.6 to 18 mm. Complex assemblies that combine wire, pipe, or sheet metal are also part of our offerings. The materials we can process include all cold-formable steels, stainless steels, and non-ferrous metals in the form of wire, pipe, and strip.

...various further processing options, such as heat treatment and surface treatment, can be applied, ensuring optimal alignment of the parts to the application case at SOP (Start of Production). Application-specific materials used include: Steel/Stainless Steel, Brass, Bronze, Aluminum, Alloy Steels, Spring Steels, as well as special materials according to customer specifications.

... problems. Would you like to have more detailed information on our special designs? Why not contact us directly? We will be happy to assist you. Milling of profiles Special concrete designs Rings for placing Shore test specimens Milling of dumbbell test specimens for tensile tests Multiple test specimens according to DIN 53281ff Stainless steel rings for tests according to EN ISO 10563 Spacers for standard joints according to ISO 11600 Spacers for elongation test according to ISO 11600, made of aluminum or PMMA in various % values Feed mechanisms...

...Materials: Automatic steels, heat-treated steels, corrosion-resistant and acid-resistant steels Dimensions: on curved and CNC-controlled lathes from bars in the diameter range of 3-65 mm chuck machining up to a diameter of 200 Quantities: small, medium, and large series Post-processing: turning, drilling, milling, sawing on appropriate post-processing machines Surfaces: ground surfaces as well as all galvanic and thermal post-treatments by external partners...

...We manufacture taper pins according to standards or drawings with a diameter of 1-30mm, length: 4-250mm, made from various steel grades and stainless steels, turned, hardened, and ground. Galvanic finishing and threading are optionally available. • DIN 1 (DIN EN ISO 2339) • DIN 258 • DIN 7977 (DIN EN 28737) • DIN 7978 (DIN EN 28736) • and according to customer specifications...

...Flange heaters with tubular heating elements made of steel and various stainless steels, for heating air, water, oils, and chemicals, integrated control, power up to 300 kW, all voltages.

...From construction steel to high-quality stainless steels, individual components or assemblies are manufactured by our qualified personnel. Sheet metal and welded constructions are carried out by us professionally. From construction steel to high-quality stainless steels, individual components or assemblies are manufactured by our qualified personnel. The components are produced according to customer specifications based on drawings.

...Contract manufacturing, new production, repair, and maintenance From single to series production of various components made from lightweight metals or stainless steels, to assembly of modules with final inspections, according to customer specifications.

...Manufacturing of 1.0 - 16.0 mm from various materials Manufacturing of 1.0 - 16.0 mm from the following materials: • Iron wire • D9-1 bright drawn • D9-1 galvanized drawn • Iron wire zinc-aluminum coated • St.37-K, St.52-3, etc. • stainless bright steel, e.g. 1.4301 and similar • spring steels, type SM / SH, phosphated or galvanized • stainless, material: 1.4310 • aluminum • brass...

... be made from various metal materials, such as: structural steels, stainless steels, aluminum, plastics, glass, carbon surfaces. For this application, powder-coated surfaces are included. When using Cleaner 100/104, the following should be noted: A cleaning cloth is moistened with Cleaner 100. Subsequently, the parts to be bonded are cleaned, ensuring that the cleaning is done only in one direction (do not wipe back and forth). Depending on the degree of soiling, the parts to be bonded may need to be cleaned multiple times.

... of various steels, stainless steels, aluminum, copper, and bronze, tailored to your requirements. We manufacture according to your technical drawings in common file formats such as DWG, DFX, CAT Drawing, or PDF – but also from sample pieces or sketches and plans. Alternatively, you can benefit from our experience and expertise right from the joint development of a robust and economical solution to your task. Contact us. Wall thickness 0.8 mm - 10 mm Diameter 5 mm - 60 mm Length 8 mm - 170 mm...