stainless steel wires Germany

...Round Wires Dimensional Range: • Dimensional range 0.20 mm – 8.00 mm depending on design, surface, and cross-section • other dimensions available upon request APPLICATION AREAS Shop fitting, displays, automotive, furniture industry, household goods, chains, blasting media, tool carriers, filter industry, fencing, landscaping, fasteners, logistics, construction industry, electrical and cable industry, wire bending parts, household appliances and gastronomy, animal husbandry...

... construction with timeless elegance and is the ideal choice for a wide range of demanding applications. Whether in the manufacture of screws, nuts, rivets, cold-formed parts or in the automotive industry - our stainless steel wire impresses with its versatility.

...DIN EN 10270 (replacement for DIN 2076, 17223 and partially 17224), Tolerances DIN EN 10218 (partially replacement for DIN 2076) According to aviation standard LN 9459: qualities 1.4314.7, 1.4324.8, and others. Available upon request with acceptance test certificate 3.1 or factory certificate 2.2. In rings, bars, or on spool. Corrosion-resistant qualities: 1.4310, 1.4301, and others. Dimension range: 0.03 - 30.00 mm Ø Various designs available upon request in: Square: 0.50 x 0.50 – 15 x 15 mm Flat wires: smallest thickness 0.10 – largest width 10.00 mm...

...Tension wire holders made of stainless steel for woven fences Tension wire holders for securing tension wires in woven fences or for other applications made of stainless steel 1.4301...

...Stainless Steel Wire A2 for Fixing and Tensioning Insulation Quantity: 1 SKU: 2233563100...

...U-profile stainless steel 1.4301 rolled is a high-quality austenitic stainless steel (AISI 304) with excellent corrosion resistance and good workability. It is commonly used in construction and building projects. Typical dimensions are: Height: 20 mm to 300 mm Width: 20 mm to 200 mm Length: 2000 mm to 12000 mm In this product we provide Length: 6 Height: 35 Width: 35...

...Well diamond wire saws achieve smooth, sharp-edged surfaces on practically any material. The applied "cutting tool" is stainless steel wire embedded with diamond particles. This patented embedding process ensures maximum cutting ability and the longevity of the wire. This special well diamond wire is NOT contaminated and leaves no impurities on your sample cutting surface during separation. The...

...The PERFECT cable gland made of stainless steel 1.4305 is the ideal solution for cable entry in various industrial applications. Features: — integrated strain relief for cables and wires — anti-twist protection — large sealing and clamping range — for cables with diameters from 3 to 42 mm — easy to install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short-term) — protection class IP68 / IP69 — testing standard UL 514B — with metric thread connection M12 - M63 Material: Stainless steel 1.4305 Protection class: IP68 / IP69 For cable diameters: 3 - 42 mm...

...We supply drawn wires starting from 0.10mm in all common • materials, such as stainless steel, nickel silver, brass, bronze, copper, aluminum, etc. • special materials such as tungsten, titanium, molybdenum, tantalum, etc. as well • heating conductor alloys and • EDM wires...

...-free electronic and a high-level DC output signal provide an easy handling without any problems. Displacement sensors of series 87240 convert a displacement into an analog electrical signal. They consist of a differential transformer with moveable core, an oscillator and a demodulator. These components are integrated and encapsulated in a cylindrical housing made of stainless steel. The sensors...

...Execution: Plain, galvanized*, stainless steel, aluminum, copper, brass, plastic-coated. Grid width: 400 – 2,200 mm Grid length: 300 – 7,000 mm, or on rolls up to 50 m in length Dimensional tolerances in length and width: -0 mm / +1 mesh width (industry standard) On request, fixed dimensions with tolerances of +/-2 mm in length and width ... Execution: Plain, galvanized*, stainless steel...

...The all-round product as filter material, sealing material, puncture and slit protection, and much more. We intertwine all materials available as wire (including coated), fibers, or threads, as well as combinations thereof, e.g.: steel (including galvanized), aluminum, all types of stainless steel, copper, plastics in threads and fibers (PP, PE, etc.), textile threads and fibers such as aramid, Kevlar, etc. OUR SPECIALTY: Very short delivery times due to a comprehensive raw material inventory, and we offer extremely flexible, customized production!

... transverse wires are part of our standard wire bent parts. Whether wire frames or sheet metal frames, upholstery wires, binding wires, or covering wires, we bend it for you. The materials used include, among others, aluminum, copper, brass, stainless steel, as well as spring steels of quality classes SL, SM, SH, DH, and many others.

...The aggressive alternative to the classic round and roller brush The twisted wires exhibit high strength, and the twisted design gives the brush particularly aggressive properties combined with a long service life. Steel or stainless steel wire Oil-tempered wire Various twist shapes depending on requirements Available as a narrow round brush as well as a wide roller brush...

...The PRO series is the standard wire drawing machine from Jankowski. The size of the drawing disc can be chosen between 550 mm and 1300 mm. Inline wire drawing machine for drawing wires up to a diameter of approximately 16 mm. Your provider for: cold forming machines, wire welding machines, wire drawing machines, machines and systems for wire cleaning, precision wire processing, special machines for wire processing, stainless steel wire processing. Drawing disc diameter: 1000 mm Drawing disc width: 208 mm Wire diameter: 1.5 - 16 mm Drawing force: up to approximately 40 kN...

...The innovative and forward-looking protective fence system HYGIENEFENCE meets the high demands of legal hygiene and safety regulations at all levels of food processes. In the stainless steel protective fence system HYGIENEFENCE, we rely on a hygienic grid construction with round wires. The junction points of the frameless modular design are spot-welded and utilize an 8 mm horizontal wire along...

...The devices typically heat stainless steel wire to about 430 degrees Celsius. This results in easier deformability of the wire and a longer service life of the molds and stamps, as evidenced by the process monitoring devices on cold forming presses. Our range starts with preheating devices with a connection power of 6kVA and goes up to 125kVA. You can heat wires from less than 1mm to 25mm in diameter.

... backing material, e.g. galvanized steel, stainless steel (1.4301; 1.4571) or brass.- The trim height (BH) (free bristle length- The overall length from a few centimeters to the maximum length which can be transported. We also can supply all sealing brush types with fixing holes in the holding flanges, e.g. 22 available sizes of round holes and 13 sizes of elongated holes. Don't hesitate to ask us for other dimensions of fixing holes, too.

... management Simple installation with stainless steel or plastic brackets The SWS consists of a flexible yet sturdy 5 mm support rod with open guiding rings, into which the cable is simply placed. Cables and hoses up to 16 mm can be safely guided – along straight paths as well as around corners. The support rods are secured with screw-on plastic mounting discs or stainless steel brackets, which can be welded to the machine body, for example. Material: Stainless steel rod Mounting: with stainless steel or plastic brackets...

...They are cylindrical and made from round wires with a constant diameter. Their characteristic curve is linear, with the load acting along the axis of the spring.

...Electric Pulse Pigeon Deterrent Made of Stainless Steel Rods Ø 2.0 mm The PIXX® electric system "Fix" effectively prevents pigeons from perching on ledges, window sills, railings, T-beams, shutter boxes, etc., through continuous electrical impulses. The stainless steel rods (Ø 2.0 mm) are mounted at a height of approximately 30 mm using UV-stabilized insulators. The stainless steel rods, made of...

... construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection Reliable Connection Conductor Diameter:0.002 mm to 0.6 mm Max. Cable Diameter:4.5 mm Temperature Load:Max. 200 °C Online Available:Type K, J, E, N, T, U, R/S, B On Request:Type C Colour Designations:DIN IEC, DIN 43710, ANSI, NFE, BS, JIS, etc.

...Wire is available in a wide variety of types and qualities. High quality in the raw material ensures our customers a high quality of their grids. Spot-welded grids and industrial grids of very high quality are produced in-house from raw/plain, ribbed, galvanized, zinc-aluminum coated, and stainless steel wires in various qualities and mesh sizes for every conceivable application. This quality has been appreciated by our customers for decades.

...Vehicles and their components are constantly subjected to high stresses and frequently changing temperatures. To effectively protect sensitive and expensive components, wire meshes and molded parts made from high-quality stainless steel wires are used. For example, catalysts and exhaust systems of cars are stored and protected in this way. · Vibration dampers in plant and mechanical engineering · Vibration dampers in environmental and electrical engineering...

... other industries. In addition to copper or nickel alloys such as CuSn8 or CuNi18Zn20, we also utilize various titanium or stainless steel grades, along with a range of special materials. Thus, we are also specialized in the production of plated, multilayer tubes and wires that combine the positive properties of precious metal alloys with those of other materials.

... - Mast fittings made of stainless steel - Standardly hot-dip galvanized, - Coating in any RAL color possible - Steel mast Ø 168 mm Scope of delivery: 2 masts with lifting device HV23 2 liftable mounting sleeves per mast Wire ropes and mounting set for transparency 2 hand cranks...

...Casting of non-standard sand casting up to stainless steel precision casting, including CNC processing, as well as aluminum die casting and SHELL casting with various materials, including welding of individual components.

... Coated and un-coated manufactured special cables and wires made from a variety of raw materials can be used in various safety, control and attenuator elements in automotive engineering. We stock a wide, extremely varied, range of connection components in a variety of designs, sizes and materials, such as brass, tinplated copper, aluminium and stainless steel. Our products are made to customer...

...Shielding braids made of parallel, stranded wires, woven into a tubular shape. Manufactured from Cu-ETP1, Cu-OF1, LEONI-Histral® alloys (upon request), aluminum, and stainless steel in bare, tinned, nickel-plated, or silver-plated finishes, either hard or soft annealed. Individual wire diameters range from Ø 0.10 mm to Ø 0.40 mm. Cross-sectional area from 0.25 mm² to 400 mm². The tubular...

...For fastening and sealing soft annealed iron wires reddish bright or galvanized stainless steel wires...