stainless steel pipe fittings Germany

...All common pipe fittings in all connection sizes and combinations for connecting threads of all types - made of stainless steel, steel, and ductile iron. For example, Y-piece similar to DIN EN 10241:2000 - Thread DIN EN 10226-1:2004 (formerly DIN 2999) or ISO 7-1 (thread-sealing connections) - Stainless steel material no. 316 (corrosion and acid-resistant steel casting)...

...Welded Nipples Size: 1/8" - 4" Material: 1.4404/316L Our threaded pipe fittings are manufactured from welded or seamless pipes according to EN or ASTM standards. We produce all materials in stainless steel (such as 1.4571, 1.4541, 316L, 304L, etc.) or nickel alloy alloys with threads according to EN, ISO, NPT, or BSP. The threaded pipe fittings can be certified according to EN 10204 3.1. Custom designs according to drawings or threaded pipe fittings larger than 4" can be produced. We have a warehouse in Germany to deliver smaller quantities on short notice.

...AWH is a manufacturer of high-quality stainless steel components for the food and beverage industry, offering pipe fittings for nearly all common pipe standards in this sector.

... custom shapes? Contact us; we will surely find a solution for your requirements. Standard range Materials: Brass, Copper, Steel, Stainless Steel, Aluminum, Copper-Nickel Heat treatment: Annealing, Hardening, Tempering Surface treatment: All electroplated surfaces Various other processes: Stamping, Notching, Flattening, Vibratory finishing Diameter: 1-55 mm Length: 1.5-500 mm...

...Electronic self-closing standpipe fittings, rotatable and lockable outlets made of stainless steel AISI 304L, single-pipe supply Self-closing WT fitting DN 15, electronically controlled, with single-pipe supply for demineralized water/industrial water/well water or brown water; stainless steel AISI 304L/1.4307; with rotatable and lockable outlets; Optoelectronic activation. Operating system LOex...

...Another product group that is used almost daily by metalworkers and locksmiths is push-fit or adhesive fittings. The photo shows a 90° corner made of stainless steel for a pipe with a diameter of Ø 42.4 x 2.0 mm. We stock several variants of stainless steel push fittings for pipes with diameters of Ø 33.7 x 2.0 mm and Ø 42.4 x 2.0 mm.

... materials, such as C-steel, which often incur high labor costs for complex moisture insulation. NiroTherm® stainless steel press fittings are additionally marked on the outside with a red dot, making them easily distinguishable from other fittings on the construction site.

...Stainless Steel Hose with Two Braids Metal hose made of stainless steel material. It features a parallel corrugation for good flexibility and two braids made of stainless steel material. This flexible hose made of stainless steel is suitable for various liquid and gaseous media. Temperature Range: up to +600°C Fittings: Flanges (Fixed/Loose), External Threads, Internal Threads, Pipe Stubs...

...Thermal stresses are absorbed by the inner pipe and do not affect the outer casing. All fittings of the inner and outer pipes are drawn from a single piece or fully welded. The construction of flue gas systems is...

...Pipe rivets DIN 7340 – Flanged sleeves – Pipe fittings – Pipe sections – Pipe bends – Plug pins – Flanged rivets – Reinforcement sleeves – Hose sleeves – Dimple tubes – Knurled tubes – Inserts – etc.

...Dirt traps to protect downstream components from contamination. All media-contacted parts are made of stainless steel, making them suitable for aggressive media. Nominal diameter: DN 10 - DN 80 Nominal pressure: PN 40 Materials: Housing: Stainless steel 1.4408; Internal parts: Stainless steel 1.4571 / 1.4310 / 1.4301 Temperature: -20 °C to +220 °C Connections: Whitworth pipe thread; NPT thread; Weld ends; Tri-Clamp connection; Special shapes; Application: Gases, vapors, liquids Mesh size: 0.25 mm, optional 0.8 mm...

...HS stainless steel fittings with threads are manufactured exclusively in V4A grades. They are available in materials 1.4436 (fittings) and 1.4571 (pipe parts) from 1/4" to 3". The tapered (external) and cylindrical (internal) threads comply with EN 10226 (formerly DIN 2999).

...Robust Clamps – Highly Durable Stainless Steel Pipe Fittings: These highly durable clamped fittings are extremely resistant to temperature and corrosion, specifically designed for dynamic loads. Thanks to the significant compressive forces, they create a reliable and sturdy connection even under dynamic loads. Robust Clamps pipe fittings thus provide an attractive alternative to labor-intensive...

...The Eder Group offers a comprehensive range of pipe fittings known for their high quality and reliability. Our pipe fittings are ideal for various construction, industrial, and installation applications. Product Features: - Materials: Stainless steel, steel, brass, copper, aluminum - Types: Couplings, elbows, tees, flanges, reducers, caps - Dimensions: Various diameters and lengths Benefits...

... threads, a butterfly valve, and a solenoid valve. Additionally, the fermentation tank has Tri-Clamp connections for CO2, a yeast discharge, a clear drain, as well as an insulated, cooled cone with an angle of inclination of 72 degrees. An integrated CIP ball allows for 360° spraying. The working pressure is limited to a maximum of 2.2 bar and is regulated by a pressure relief valve and a vacuum valve. Furthermore, a pressure relief device and a hop dosing chamber for dry hopping are integrated. The connections can be executed as either Tri-Clamp or milk pipe fittings.

...We supply you with stainless steel, glass, and wear-resistant pipe fittings. All diameters for pneumatic conveying systems are available from stock or can be delivered at short notice.

...Available in steel, black ductile iron, galvanized ductile iron, stainless steel casting, or pipe fittings such as couplings and nipples made from 1.4571 pipe.

...Whitworth pipe thread - Frame components with media contact: Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Frame components without media contact: Material brass chemically nickel-plated - Temperature range 32 to 176 °F (0 to +80 °C) - Working pressure range 0 to 362 psi (0 to 25 bar) Attachment:threaded Configuration:T Applications:pneumatic Material:stainless steel Media:Compressed air, fluids Characteristics:Minimum dead zone connector...

...CONTAINERS MADE OF STEEL AND STAINLESS STEEL Type: • Storage containers • Pressure vessels • Mixing tanks • Feedwater tanks • Special containers Design: • Factory-made • Site-fabricated • With / without fittings • Single and double jacket • Cylindrical / conical / rectangular • Full pipe coil / half pipe coil heating / cooling • With / without agitator...

... connections. UNEXiS safety hose clamps have been tested by the Federal Institute for Materials Research and Testing in Berlin (BAM) for flawless sealing of hose connections on pipe fittings at gas and liquid pressures of 300 kg/cm² (=300 bar or 4,400 psi). Our designs are available in a variety of dimensions and tightening methods.

...Elbows and connections made of steel and stainless steel for oil, gasoline and air hose lines. The connections are pressed onto the assembled hose.

...In addition to our core competency in pipe bending, we offer our customers assembly services for all major cutting and compression fittings. Using our state-of-the-art process-monitored assembly machines, we assemble cutting and compression rings from all leading manufacturers, including Parker, Eaton/Walterscheid, VOSS, and Swagelok. We assemble versions in steel, galvanized steel, stainless...

... horizontal and vertical configurations. With the help of these steam generators, steam pressures of up to 100 bar and higher can be achieved. The quick steam generators can also be designed as directly fired pure steam generators. In this case, all media-contacting parts, such as the pipe coil, pump, and fittings, are made of stainless steel.

...In the field of pipe connection parts, OTTO ROTH covers almost all common dimensions and materials. OUR PRODUCT RANGE: • GF cast iron fittings • Steel fittings with threads • Steel fittings for welding • Steel pipe bends – pipe bottoms • Flanges • Valves • Seals • Pipe clamps • Straub couplings Valves, fittings, pipe bends, and flanges can also be supplied in stainless steel versions, as well as in other special sizes or materials. Additionally, we can provide all products with the corresponding certificates upon your request.

...Pipe Quick Clamps 3-Point up to 370 mm Centering and clamping of pipes, pipe bends, flanges, T-pieces, and other fittings! Fine adjustment is made with wing screws. Zinc-coated steel or stainless steel. Various sizes up to 370 mm.

...among other things, clamping and cutting ring connectors. The screw connection typically consists of 3 parts: the body, a ring, and a nut. The pipe is inserted into the connection body through the nut and ring. By tightening the nut, a secure connection is created, causing the ring to clamp or cut onto the pipe. This program is available in plastic, brass, steel, and stainless steel, and is complemented by an accessory program (fittings) made from the same materials.

...HD Precision, Steel and Stainless Steel Pipes • PA pipes for compressed air systems • Pipe, hose, and fastening clamps made of plastic, steel, and stainless steel...

... making a smart choice in any case. The pipes and fittings are longitudinally welded using the TIG or MIG process and can be easily connected with flanges or clamping rings. All components are available painted or powder-coated in fire- or strip-galvanized black sheet metal (16Mo3), aluminum, or stainless steel (1.4301, 1.4404, 1.4541, 1.4571, 1.4828, etc.). Are you planning your ventilation technology for the first time or redesigning it? We offer you everything from a single source: from static calculations to design and construction, all the way to manufacturing and assembly. Your advantage?...

... plate on the handle allows for clear pipe identification — Non-rising upper part — Dead space-free upper part — Functional parts of the piston valve are maintenance-free and permanently lubricated — Deposit-resistant sealing piston due to special profile All materials meet the requirements of the Federal Environment Agency and are approved for drinking water. Material of the brackets: Stainless steel (1.4301) Material of the fittings: Brass or lead-free brass...

...The handling of the Tri-Clamp connection 3C is straightforward: The two flange-like fittings are pressed together and connected with a closure clamp. A sealing ring between the fittings ensures a secure seal. This creates a smooth, form-fitting connection that can be quickly and easily loosened or tightened at any time using the wing nut of the closure clamp. The Tri-Clamp connection can be combined with a hose fitting 1+, 1A, or 1C, a pipe fitting 2N, or an external thread. Pressure rating: PN06...