soft pvc Germany

...The JEDI Kunststofftechnik GmbH strip curtains or foils are designed for Soft-PVC shield welding workplaces to protect bystanders who are near or passing by the workplace (protection against UV light, infrared rays, swirling sparks, and flying sparks). However, they cannot be used to observe the welding process as a substitute for a welder’s shield. The quality of the shielding foils for welding...

...The extremely soft film is coated with an aging-resistant natural rubber adhesive. Application area: Masking and wrapping of insulation materials such as mineral wool or foam in HVAC and sanitary technology.

...Standard soft PVC insulation tubing meets all requirements for an insulation tube designed for the protected installation and bundling of cables. Temperature: -20°C to +105°C Regulation: DIN40621 / DIN EN 60684-3-100 to 105 Designation: Soft PVC insulation tubing Dimensions: ID from 0.5 to 30 mm...

...Caps made of soft PVC in various sizes and colors...

...The gas-tight aluminium closures are suitable for mineral water, soft drinks, beer, wine, sparkling wine, milk and milkshakes, suitable for cold and hot filling, pasteurisation and for sterilisation. The closures can be delivered with transparent or body colours as well as lots of printed versions, with or without locking ring and with 5-fold or 6-fold vertical notching. GLASS STUDS:according to DIN 6094-12 OPENING VALUES:4 – 11 lbs/inch load capacity:Recommended for up to 12 months, cool, dry storage White:approx. 1.5 KG/1,000 locks...

...Robust PVC slat room dividers for industry to separate different areas. Prevents the ingress of cold air, drafts, dust, and dirt particles. Energy saving - reduce heating costs! Simple, flexible, and economical separation of different areas. Robust fastening systems for industrial use. Various slat types and slat overlaps allow for adaptation to draft conditions, building heights, and passage...

...Pest Control Hose, Vine Spraying Hose This multi-layered PVC pressure hose in high-pressure design (HD) is specifically suitable for use as a pest control hose / vine spraying hose. In general, it is also suitable for the transport of water, pesticides, insecticides, slightly alkaline liquids, seawater, wastewater, and mineral oil-containing liquids. Temperature range: from -20°C to +60°C Inner core: Soft PVC, black, smooth Outer cover: Soft PVC, blue, smooth (DN 19 outside black with red stripe) Reinforcements: 2-layer polyester fabric with intermediate layer...

...• To remove carrots without smudges on plastic parts or on soft materials such as lead • Blades with a straight cut • With an adjustable blade stop via a screw (only model 133FG) • With a spring opening • Plastic-coated handles • Made of special tool steel, forged, oil-hardened Length in millimeters: 160 Weight in grams: 135...

...Sheets and rolls made of soft PVC for various applications...

... silver color finishing to increase durability of the bits and its efficiency in the job site. This metal bit is composed of high-speed steel, which is a type of tool steel that is extremely resistant to heat and is commonly used for drilling hardwood, strong metals such as stainless steel, and soft metals such as aluminum, polyvinyl chloride (PVC), fiberglass, and other materials at high speeds. Model:RH-5379...

...Electromagnetic sealing jaw type MS...IP for welding and sealing bags: - From PE - From PP - From soft PVC or polyamide Features: This sealing jaw has: - Adjustable welding time - Adjustable cooling time - Adjustable cycle time The jaw is controlled by an electric foot pedal.

...The BISTRO Folding Standing Table is stable even on uneven floors thanks to adjustable feet. It is robust and sturdy, made from rectangular tubes (powder-coated) in RAL colors. Bistro tabletops are available with soft PVC edging for indoor use or with Sevelit boards for outdoor use. The plastic-coated particle board can be supplied in current colors. Available in various sizes and variations...

...The question of the ideal milling cutter is dependent upon the material to be machined. A single-tooth cutter is often an advantage for ""soft"" materials (PVC, Perspex, Kömacel, etc), wooden materials (chip- or flakeboard) and non-ferrous metals (soft aluminium, Alcubond, etc.), as the problem of cutting erosion in comparison to clogging recedes. A double flute is better suited to very hard...

...Rain protection set 12256 consisting of an extension made of PVC and a black protective cap made of soft PVC for the floor sockets 7501A, 7601A, 7602A, 7604A and 7701AW. The rain protection set offers ideal protection against rain with plugged-in connections. Use: Proper installation and proper use is required. The seals must be cleaned of dirt regularly and the products must be checked to ensure they are in perfect condition. Design:cylindrical Ground:indoor Material:Soft PVC, PVC Color:Black, Gray (RAL 7011) Surface:untreated...

...• The leather hood is suitable for use in welding operations, especially in confined spaces. • The mask is made from soft cowhide leather. • The welding protection glasses can be flipped up when needed. • The glass holder is designed for lenses with a diameter of 50 mm. • A spring closure allows for easy lens replacement. • The inner glasses are made of soft PVC and fit comfortably on the face.

...Double suction cup Ø 50 mm, colorless Suction area: Ø 50 mm Material: soft PVC, phthalate-free...

...Art-No. S092875 welded soft box for CD stampers and CDs · right side: holder for CD stamper ø 138 mm · left side: holder for CD on star · clear foil outside: open at the top · color: white · dimensions: approx. 330x160/10/160 mm · material: PVC 0.39 mm...

...Floor Profile Item No.: 843 Color: transparent Shore A Hardness: 85 Quality: soft PVC Sales Unit: 50 m rolls...

... and cutting services. We manufacture using relatively inexpensive tools (punching) or even without tools (cutting) in small, medium, or large quantities according to your specifications. We punch and cut felt, leather, foams, non-woven fabrics, textiles, films, plastics, cork, fiberglass, carbon fiber, synthetic leather, fabrics, silicone, rubber, PVC, TPU, and much more.

...Material: 0920/0921/0922 made of PVC, III/483 and H1175 made of soft PVC Minimum order quantity: 100/500 pieces Standard colors: black, white, silver gray Types III/483 and H/1175 available only in black Special colors, sizes, and designs available upon request...

...The cellular plastic has a closed and open cell structure, making it very soft. The mechanical properties are good. We supply the cellular plastic qualities in densities ranging from 100 kg/cbm to 160 kg/cbm. The cellular plastic has a closed and open cell structure, making it very soft. The mechanical properties are good. In addition, the quality is resistant to mineral oil, gasoline, alkalis...

...Wing fold seal for 12 mm fold height Sealing profile in white for 12 mm fold height, 4-5 mm groove width. Material: TE-(EPDM-X+PP) (Ethylene/Propylene Terpolymer / Propylene, cross-linked) Excellent weather and ozone resistance, good UV stability as well as the best physical properties, PVC-free, no plasticizer migration and therefore compatible with water-dilutable acrylic stains and paints. Temperature range: from -30°C to 100°C Prices are per meter and the seals are available in fixed lengths of 5m.

You can rely on us! For 65 years, Pütz Folien has stood for unique quality and service in film processing. Through contemporary innovations and a modern machine park, we cut films from leading manufacturers precisely for our customers worldwide, focusing on extraordinary and demanding products. We specialize in precise film processing with state-of-the-art technology and offer flexible, cust...

...DIN certified soft PVC strips for welding protection screens, available in various colors, certified according to DIN EN ISO 25980:2015-01, with rounded longitudinal edges, standard material, available from stock. Dimensions: Available from stock in (Width x Thickness x Length): 300 x 2mm x 50m 300 x 3mm x 50m 570 x 1mm x 50m Other dimensions available upon request, in the following sizes...

...Our recylcing machinery can process multiple types of thermoplastic polymers in diverse forms. Important is that the waste is clean, contains one polymer only and is thermoplastic. Our largest polymer is PVC. About 60% of the processed plastic waste is rigid or soft PVC. The reaming 30% are mainly PP and HDPE but also LDPE and multiple engineering grade polymers. The plastic waste can be mixed or...

...PVC Packaging...

...Soft PVC of all kinds for manufacturing hoses, sheets, films, blocks, also fabric-bound.

...Highly flexible | Extremely bendable in any weather | UV-resistant Packaging unit: 50 m Hose inner diameter: 6.3 mm Hose outer diameter: 11.0 mm Bending radius: min. 23 mm Weight: 70g / m Customs tariff number: 40094100 Material inner core: black PVC Temperature range: -20°C to max. +60°C Operating pressure: 15 bar, burst pressure: approx. 60 bar Roll length: 50 m Article number: P 6 SOFT Material outer cover: blue PVC Material fabric insert: polyester thread...

...Ergonomic fit for freedom of movement Secure back neck studded adjustment Elasticated soft touch ribbed cuffs Thumb loops for added security One size fits all wraparound design for enhanced coverage Easily adjusted with side tie fastening Standard performance Fluid repellent PVC coating with soft comfortable feel Machine washable up to 75°C for 100 washes ‘under testing’ Lighter, more flexible than standard PVC Stitched and high frequency top welded seams for greater protection ProductType:Surgical Gown Material:81% PVC 19% Polyester...

...We manufacture plastic profiles from common thermoplastics such as PVC, PS, ABS, and others. Hard-soft combinations or color variants are also possible. Simply send us a drawing, and we will provide you with a free, non-binding quote. • End profiles • U-profiles with sealing lip • Impact strips • Shower seals • Tube packs • U-profiles for wall bases • Guide rails • Cover plates ...