pressure relief valve Germany

...A comprehensive range of high-pressure valves, safety valves, and pressure relief devices, tailored to pump performance - all manufactured in-house. Just like the high-pressure plunger pumps, these valves can be equipped with special seals.

... reduced to the preset value and can escape through the third pipe connection into a secondary line. When the pressure drops, the spring force pushes the diaphragm towards the sealing seat, causing it to close. The spring force can be adjusted as needed using an adjusting screw. - Valve settings can also be made under working pressure - The optimization of pistons, springs, and control surfaces ensures good control characteristics - The actuator is hermetically separated from the medium Medium: for water Additional features: diaphragm, flange, piston...

...Pressure Relief Valve for Top Pump and A-Ryung Lube ITEM NUMBER: 1010660...

... threads, a butterfly valve, and a solenoid valve. Additionally, the fermentation tank has Tri-Clamp connections for CO2, a yeast discharge, a clear drain, as well as an insulated, cooled cone with an angle of inclination of 72 degrees. An integrated CIP ball allows for 360° spraying. The working pressure is limited to a maximum of 2.2 bar and is regulated by a pressure relief valve and a vacuum valve. Furthermore, a pressure relief device and a hop dosing chamber for dry hopping are integrated. The connections can be executed as either Tri-Clamp or milk pipe fittings.

...pressure relief valve, adjustable plastic nozzle, dip tube for upside-down application...

...Valves and shut-off devices are components used for the isolation and regulation of liquids or gases. The product range includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, shut-off dampers, as well as solenoid valves, pressure switches, shut-off valves, needle valves, and shut-off sliders. Coaxial valves and check valves are also part of the assortment, along with strainers, safety valves, and pressure relief valves.

...Application as end-of-line armature for venting apertures on tank installations, valve is explosion-proof and endurance-burning proof for certain inflammable liquids. Used mainly as venting and breather device for fixed roof tanks to prevent inadmissible pressure and vacuum and to minimize unwelcome gas losses and inadmissible emissions. Approved for all materials of the explosion group IIA with...

...Pressure relief devices for liquid-immersed transformers open in case of an internal fault and guarantee that the occured overpressure can properly release. Pressure relief devices close with decreasing pressure back to completely closed and leaktight position. Pressure relief devices for transformers can be installed in any position or inclination on the cover or the wall of a transformer. Upon request a transformer can be equipped with several pressure relief valves.

...for use with the highest precision KAMAT pressure relief valves for our high-pressure plunger pumps ensure optimal operating pressure at all times. They allow for both mechanical and pneumatic remote control of the pressure. We also offer the option of manufacturing the valves from special materials, making them particularly suitable for the transport of demanding media, such as in the process...

... pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity Media:for coolant,emulsions, oils,for lubricants Operation:electric Priming:under load Type:3-screw Domain:industrial,for machine tools,for the metallurgical industry Other characteristics:horizontal mount,high-efficiency,high-flow,high-pressure,discharge,for emulsions,cutting fluid...

...The autonomous pressure regulator type 8011 is a reinforced version with a closed cap. It is available as a pressure reducer (downstream pressure regulator) or as a relief valve (upstream pressure regulator) and is used in a wide range of process engineering control applications. Media such as steam, liquids, gases, etc. can be perfectly controlled without auxiliary energy. Material: Fully...

... Cabinet heated by water jacket on four sides and bottom Exposure zone lined with corrosion-resistant PVC sheets Clear cover allows viewing of test conditions Peaked cover prevents dripping of condensation onto samples Water seal Heated humidifying tower with air relief valve Automatic DI water fill to humidifying tower Automatic solution level control Digital temperature control and readouts Certified...

...Dosing system DB 10: lubrication made easy The dosing system DB 10 uses a pressure vessel with a capacity of 10 litres. This is equipped with a filler ball valve and plastic funnel, a pressure regulator with bleed screw and a safety pressure relief valve. A float switch is fitted to regulate the fill level. There are two dosing valves on the underside. This dosing system is available in the following versions: DB 10 H – with poppet valve DB 40 – with 40 litre reservoir DB 40 H – with 40 litre reservoir and poppet valve...

...The pressure relief flaps have been specially designed for explosion-hazardous areas. They serve to protect people and buildings. In the event of an explosion, the flaps are opened by special industrial magnets. They allow pressure in the building to escape in a controlled manner and then close automatically. The flaps are custom-made, and the release pressure is set at the factory. Standardly made of aluminum and equipped with 40 mm thick insulation, we can also offer the flaps in a thermally separated version made of plastic (down to -40 °C).

...The pressure holding valve 5D is designed to relieve work-related or system-induced overpressure. It dissipates pressure spikes by relieving the system when the set pressure is exceeded. Both versions of the pressure holding valve can be installed horizontally or vertically, regardless of orientation, making them highly versatile. Thread: G internal thread Pressure rating: PN6 Adjustment range: 0.2 - 6 bar...

... Fully automatic refill approx. 7.6 liters water capacity (boiler and refill tank) Cleaning agent function (5 L cleaning agent tank) 15 bar high-performance pump Stainless steel heating boiler 155 cm stainless steel heating hose 2 solenoid valves automatic pressure regulator 2 safety temperature monitors 1 additional pressure relief valve 5 volts at the handle Control at the handle LCD display unit complete electronic control and monitoring of the system...

...The stable and reliable lift table can be mounted on the floor or recessed, making it suitable for manufacturing companies as well as for warehouses and logistics. stable and reliable simple scissor lift made of round steel, maintenance-free hinges * removable transport eyes (4 pieces) * equipped with a safety valve * low-noise drive with built-in pressure relief valve and controllable release valve for controlled lowering. * the upper platform is equipped with a safety frame: there are 2 safety switches on each side to prevent unintentional lowering. * 3 m cable...

... diaphragm position control, built-in pressure relief valve, and diaphragm failure indication • Gear mechanism with integrated lubrication system and sliding bearings • Modular concept • Integrated reduction gearbox • Minimal space requirement • Compact design...

...Delfin's central extraction systems are characterized by high performance and reliability, and they operate very quietly. Delfin's central vacuum systems feature various characteristics, such as remote control and safety systems to protect the side channel blower, as well as a pressure relief valve. Both the central extraction system and the control panel can be customized with a change funnel...

... the hood. - Binder pump with pressure relief valve and hydraulic drive, allowing for suction, circulation, and intake from the drum. - Water-cooled 3-cylinder Kubota diesel engine with electric start system. - The cooling water from the diesel engine is used to heat the binder pump, bitumen filter, and spray bar. The binder tank is preheated by a propane gas burner system. The automatic gas burner system is equipped with all relevant safety features. - A compressed air cleaning system with a small compressor is available for cleaning the binder pump, spray bar, and bitumen hoses.

...The innovative coupling for all hydraulic grease nipples. The new greasing: safe, clean, tight, convenient. 4 years functional warranty! The 4-jaw snap closure holds the coupling securely on all hydraulic grease nipples. It is tight up to 1,000 bar, with or without a pressure relief valve! Small diameter for tight spaces. The nozzle for two free hands for the grease gun.

...Article No: 130125 Catalog No: 9900016547 Supplier No: 4332163719175 Scissor Lift Table, Mobile, Model TF • Application: Assembly and repair work • Individually adjustable working height • Control via hand grip • Stepless height adjustment • Hydraulic pumps with pressure relief valve • Both swivel casters with locking brakes and foot protection • Polyurethane wheels for quiet and easy movement • Acrylic coating: RAL 1023 traffic yellow, double Further Information Weight: 81kg Load Area (Length): 850mm Manufacturer: N/A Load Capacity: 500kg Load Area (Width): 500mm Color: Yellow...

...Stainless Steel: DUO-4404, bar material free of cavities, stainless steel casting: DUO-4408, steel: DUO-St, short construction length: FTF 27 Long construction length: FTF 28, DN15 - DN200, PN10-40. Two-part housing, full, round passage, blow-out proof spindle, spring-loaded spindle sealing, anti-static device, "fire-safe" construction, ball seats with pressure relief according to DIN 3230-6 4.1.3, DIN/ANSI flange connections, TA-Luft certificate according to VDI 2440 and DIN EN ISO 15848-1. Approval for rail and road according to TÜAGG 433-10, CE conformity according to DGRL.

...Check valve Safety valve Pressure switch with motor protection and relief valve, from 5.5 kW with solenoid valve and star-delta switch (wall-mounted) Condensate drain Ball valve Mobile units are additionally equipped with three meters of cable, plug, and quick coupling. RENNER piston compressors RIK and RBK With the RENNER RIK program, you have access to a wide range of piston compressors for...

...A technically oriented consultation tailored to the specific needs complements Beinlich's global service for the benefit of our customers. Examples of specially developed system solutions: Metering pumps for polyol with abrasive fillers and attached bypass valve Metering pump with barrier chamber sealing for the polyurethane industry with attached pressure relief valve and gear servo motor as a complete unit Complete unit in bronze design for foam agent dosing with integrated volume sensor and safety valve.

... depth: 219 mm 25 l/min at 80 bar at 50 Hz 35 l/min at 80 bar at 60 Hz with flanged pressure relief valve DVK 3/4": - max. pressure: 120 bar - variable adjustable (set by the customer) - max. flow rate: 250 l/min Temperature (medium): +30°C to +80°C Inlet: SAE 1" Outlet: G 3/4" Extension set consisting of: - Pressure gauge - Sealing ring G1/4 - Connection piece - Sealing ring - Flat gasket - Pipe G1 (382 mm) - Pipe G1/2 (380 mm)...

... • Start-up relief via Condor pressure switch Model: 400-50 Suction capacity (L/min.): 350 Tank pressure (bar): 10 Speed (rpm): 2880 Sound pressure level LWA/dB: 97/78 Motor KW/HP: 2.2/3 Volt / Hz: 230/50 Dimensions: 860x380x710 mm Weight: 50.0 kg Design: Oil-lubricated Electrical voltage: 230 V Type: Piston compressor Effective delivery rate: 235 l/min Tank size: 50.0 l...

...Hand pump with lever / for tank installation (PMS) with integrated pressure relief valve (for operating single-acting cylinders) Designation: PAM-TSV 45: Displacement volume cm³ / cycle: Max. pressure bar: 280 Weight (with protection) kg: 3.050 Item number: PAM-TSV 45...

...AWS Apparatebau GmbH specializes in fittings. AWS develops and manufactures, among other things: - Check valves - Valve technology • Check / pressure relief valves • Strainers • Ball valves - Apparatus construction The products from AWS Apparatebau are used in various industries such as machinery and plant engineering, beverage dispensing systems, medical technology, as well as the electronics and chemical industries.