iso ts Germany

For over 75 years, Monninger has been the expert in stainless steel and steel springs. Experience, customer relationships, and quality awareness have always been the foundation of our success. As early as 1994, we were first certified according to ISO 9001. In 2012, we entered a new era with certification according to ISO TS 16949, which shapes all our actions. The solid company has long since...

... management, we rely on the latest technologies. Every lamp and lighting system that leaves our factory has been thoroughly tested using highly advanced measurement technologies. We have over 500 different specialty lamps and more than 100 different automotive lamp types ready for you. Our products under the brands NARVA and vosla carry the quality label "Made in Germany". The high standards in quality and reliability are supported in our company by certification according to ISO TS 16949.

... ensured by qualified employees, the use of technically advanced machines, and a holistic and sustainable concept for implementing the tasks set by the customer. It is important to us that the quality and cost-effectiveness of our work and products are closely linked to our responsibility for the environment and society. Our integrated management system includes quality, environmental, occupational, and health management. We are certified according to ISO TS 16949, ISO 9001, ISO 14001, EMAS III, and OSHAS and are users of the German Sustainability Code.

... a high quality level of our products. First sample inspection reports, e.g., according to VDA and PPAP, are a matter of course. All our locations are certified according to DIN ISO 9001. Our headquarters in Steinau an der Str. is also certified according to DIN ISO/TS 16949. Regular inspections by our customers guarantee a high quality level. We guarantee a quick response to your email inquiry at info@sico.de Contact us! There are many good reasons to work with us.

... Metall- & Kunststofftechnik manufactures: - Stamped and bent parts - Fine-blanked parts - Progressive composite parts - Plastic parts - Metal-plastic composite parts In addition, we also offer, in contract manufacturing: - Powder coating - Assembly of components We are certified: - ISO TS 16949 (2009) - ISO 14001 (2004)...

... business areas: Color Batch, Additive Batch, and Polymer Technology. Over 200 employees develop and produce at the state-of-the-art facility in Blankenhain (Thuringia), located in the heart of Germany, for both the national and international markets. The company group is certified according to DIN EN ISO TS 16949:2009 and DIN EN ISO 9001/2008. More information at: www.grafe.com Dipl.-Kfm. Matthias Grafe Dipl.-Ing. Clemens Grafe...

...professional users worldwide trust our products and application-oriented solutions. Klauke develops and produces electrical connection technology and special tools for the automotive industry, certified according to ISO/TS 16949:2009. Our solutions are used, for example, in wiring harnesses, engine concepts, or electromobility. Based on decades of accumulated know-how and state-of-the-art...

... successfully certified according to ISO/TS 16949 – the highest standard in the automotive industry worldwide. In-House Production We manufacture our fasteners and assembly systems ourselves. In Germany, France, Italy, Austria, Switzerland, North and South America, India, and China, we have our own modern production facilities and highly qualified employees for the efficient production of high...

The company Ewald Denker specializes in the production of turned parts. As a manufacturer, we can respond individually and flexibly to your requirements. Our goal is to meet customer wishes and achieve short and flexible delivery times. We are certified according to ISO TS 16949. We meet all common quality requirements for your products. With our ERP system, we achieve a transparent manufacturing...

...We are a company founded in 2015 specializing in the manufacturing and product development of pipe mounting and fastening clamps. 30 years of professional experience enables us to offer you competent advice, especially for individual problem solutions and custom-made products. Our efficient technology allows for resource-saving and environmentally friendly production. Our goal is to stand by you as a flexible and reliable partner. We adhere to the guidelines of DIN EN ISO 9001:2015 as well as ISO/TS 16949.

... is located in Bietigheim-Bissingen, in one of the most innovative industrial regions of Germany. For over 40 years, we have been involved in compressor and pump technology. This extensive experience benefits our customers today. An innovative development department, state-of-the-art manufacturing facilities, and a certified quality management system, including ISO 9001, ISO 13485, and ISO/TS 22163...

...»50 years of experience and continuous development prepare us for the future.« FUCHS Kunststofftechnik is an expanding, modern family business based in the Oberbergischer Kreis. We see ourselves as a full-service provider and are certified according to ISO TS 16949/2002. For more than five decades, we have been working for an ever-increasing number of customers from almost all industries...

... system certified according to ISO / TS 16949: 2002. - Design and development using modern 2D and 3D CAD systems. - In-house component testing facilities to ensure durability and function. - Own material laboratory with scanning electron microscope and X-ray - spectral analysis for material examination. - In-house tool and machine construction. - Modern IT systems for fully electronic order processing (Edifact, Odette, VDA).

...  Zinc die casting: machines with clamping force up to 400 tons  Surface treatment: powder coating, painting, chromating, coating, blasting  Assembly  ISO/TS 16949: 2009 certified Based on the principle of fairness and honesty, we consider every customer and every project equally important. We handle all projects with care and professionalism: quality and reliability are the cornerstones of our business operations.

...) - Doris Beu - Aloys Lönard R·B·B Aluminium is certified according to DIN EN ISO 9001:2015 and is organized according to ISO/TS 16949. Since 1999, the operational business has been conducted as a family AG established from the GmbH. Our Business Areas Our company is divided into two business areas, which benefit from the know-how of all sectors and utilize synergies. Custom Products - Aluminum...

...Our commitment to excellence demands the highest quality. With our certification according to ISO/TS 16949, we meet the current highest standard of quality management systems. Our goal is to plan for quality rather than just inspect it, and we keep this in mind at all times. The high level and competitiveness of our products can only be maintained through continuous research and development. New...

... (deep-drawn sleeves combined with compression springs) or ground compression springs in high grades and the smallest dimensions. We use all common materials and additionally offer galvanic surfaces. We are certified according to DIN EN ISO 9001: 2008 and ISO/TS 16949.

... according to ISO/TS 16949 demonstrates our commitment to quality. The application areas of Heckler cold flow-formed parts range from injection technology to fuel supply and transmission technology, as well as restraint systems. All products are delivered ready for installation and with outstanding quality standards.

...• Elastomers • Thermoplastic elastomers • Elastic plastics Our production is certified according to ISO 9001, ISO 14001, and TS-16949. From single solutions to large series We support and guide you in selecting the right material, providing know-how for problem-solving from monomer to finished series part. From prototypes to series production, including assembly, logistics, and corresponding parts management. As a lean company with the shortest decision-making paths and minimal overhead, we differentiate ourselves from the competition through quality, flexibility, speed, and reliability.

... manufacturing • state-of-the-art multi-stage presses • innovative series production for the most complex components • prototypes and small series production of deep-drawn parts • ISO/TS 16949-2002 certified • from concept to series production • development coaching for optimized parts. Processable materials • thin sheets made of steel, aluminum, stainless steel, and non-ferrous metals • material...

... ready for you with the latest computer-based technologies. Of course, quality is our top priority. Since 2001, we have been certified according to ISO/TS 16949 and strictly adhere to this system. With a medium-sized company character and our strong organizational structures, FRÖTEK is very flexible and quick to act in every respect. FRÖTEK employees can support you worldwide and promptly forward information to the appropriate department if necessary. Our international locations provide additional logistical advantages.

.../TS 16949:2002 2001 Continuation of the family tradition with the takeover of commercial management by Silke Baumgartner 1999 Certification according to QS 9000 1995 Establishment of a plastic injection molding facility for coil bodies and encapsulation housings 1994 Entry into automotive electronics - production of filter inductors for airbag electronics 1993 Certification according to...

...The main products manufactured in Hof include external gear pumps and fluid motors. The facility, certified according to ISO 9001:2008, SO/TS 16949:2002, ISO 14001, and BS-OHSAS-18001:2007, is equipped to the highest standards in CNC machining, grinding, precision gearing, assembly, and testing.

...Wachtendorf & Schmidt is a medium-sized family business that has been active in metal processing since 1938. We specialize in the production of stamped and cold-formed parts. Our certifications according to DIN EN ISO 9001, QS 9000, and TS 16949 are part of the reason why well-known companies in the automotive industry worldwide count among our regular customers. Our range of services also...

... requirements of the ISO/TS 16949:2009 standard for the production of parts and assemblies through stamping technology, fine blanking technology, and machining, which is continuously and consistently being expanded. Since 1998, we have participated in the European Community System for Environmental Management and Environmental Auditing. We believe that our actions should not only be evaluated from an ecological perspective, but that the protection of natural resources is necessarily an equally important corporate objective.

...Precision parts made from fine tubing (tube rivets, flange sleeves, connector pins, crimp sleeves, custom parts according to drawing) Precision stamped parts, loose or on a strip Parts for cable connection technology (wire end sleeves, stop parts such as flat plug sleeves, connectors, sockets, ...) In-house machine and tool manufacturing In-house galvanization Certified according to ISO 9001:2008 and ISO/TS 16949:2009.

...Aysan Decorative Shelf Systems Industry and Trade Ltd. was established in 1984, taking its role in the production of bolted steel shelving. It has established itself in the market and is now certified with ISO 9001 / ISO 14001 and TS 18001, as well as CE TSA, FEM, and PSD documents. We manufacture various types of racking and shelving systems tailored to the physical conditions of your warehouse...

... engineers, optimal material selection, and a machine park that meets nearly all requirements are our guarantees for an optimal product in line with our customers' needs. The entire process is accompanied and monitored according to the certified quality management standards DIN EN ISO 9001:2008, DIN EN 9100:2003, and ISO TS 16949:2002, which also includes product-related packaging and logistics.

Consulting, planning, training, implementation, support, further development of quality management systems, environmental management systems, process management. DIN EN ISO 9001, EMAS, DIN EN ISO 14001 quality management, environmental management, process management. DIN EN ISO 9001, EMAS, DIN EN ISO 14001, TS 16949, continuous improvement process: FMEA, 8D report, KAIZEN, idea management, preventive maintenance, error management, process analysis, audit, customer-supplier relationship.

With manufacturing facilities certified to ISO and TS standards and a global presence, Carling is one of the leading manufacturers of circuit breakers, switches, power distribution, and digital switching systems.