load lifting equipment Germany

...Here you will find hooks, shackles, and attachment points for secure load attachment. Here you will find all the items you need for a safe connection of the lifting equipment with the load. Wire rope clamps and thimbles for creating lifting ropes for single use. The program is rounded off with accessories for "Running Ropes" such as rope pulleys, wire rope rollers, and blocks, as well as assembly aids like rope sleeves or rope lubricants.

... cost, two lifting speeds as standard. Chain Hoist DCS-Pro: Stepless lifting speeds for loads up to 3,200 kg. Manulift DCM-Pro: Perfect handling of loads up to 250 kg. Chain Hoist DC-Com: Easy commissioning, ergonomic handling. Manulift DCMS-Pro: Chain hoist operation and load guidance with one hand. Chain Hoist DCBS: Lifting and lowering using manual force at the control switch, manipulating the load...

... quality. Choose between two different transmitter types: the ABURemote Button handheld transmitter and the ABURemote Joystick master switch transmitter. Control frequency-regulated drives with the two-stage buttons or master switches. Accelerate or decelerate to the desired speed and maintain it comfortably. The illuminated display provides information on selected settings, active cranes and trolleys, the strength of the radio signal, and the battery status. And of course, you can see if a load indicator system (LIS-SV)...

... construction, the MOVOLIFT ME can be used in a variety of ways. Whether as a single lifting axis for ergonomic height adjustment of devices or integrated into a transport system, the MOVOLIFT ME is the ideal equipment for your handling system. Key Features • Load capacity up to 475 kg • High torque (up to 1,500 Nm) • Precise • Universally applicable • Automation capable • Low weight • CE compliant...

...The ergonomic fully modular Lift&DriveP models offer extensive customization options for the appropriate ergonomic handling system. With the Pronomic Lift&Drive models, the full flexibility of the modular system is available for a tailored solution. Different surfaces can be selected, such as hygiene versions, stainless steel / anodized aluminum, color-coordinated to match your company’s corporate design, or in blue multi-layer powder coating. Load capacities of various models: 90 kg - 325 kg...

... is 500 mm (special lifts available upon request). The drive consists of a 24 V DC geared motor, which is typically powered by a control/transformer unit (230 V AC/120 V DC). In combination with the MultiControl mono 'med' control, the Multilift is also suitable for the medical sector. Features: • Fourfold bearing with POMG sliding bearing shells • Powerful DC motor • Integrated limit switches • Self-locking even at maximum load Options: • Special lifting lengths • Operable with Quadro control in bus system for up to 32 columns • Tested according to EN 60601-1 3E...

... turned. The ergonomic octagonal shape of the base allows for easy installation using a standard open-end wrench. 100% crack tested. Complies with the testing principles of BG GS-0A-15-04. Like the TITAN anchor point, the X-TREME anchor point has 100% load capacity in all pulling directions. The X-TREME anchor point is not suitable for continuous rotational movement under load! Item number: TH-F34300 Thread: M16 Vertical load capacity: 2.8 tons Thread length mm: 20...

...One-handed operation for safe and quick load handling is the concept of the Manulift DCM-Pro.

...Glass lifter of the latest generation with a load capacity of up to 600 kg The SL 609 Outdoor is your reliable support for the installation of glass, marble, granite, and steel. This high lifter electric version with a rotating yoke allows for faster operation and offers additional features for your installation requirements. With the integrated IoT device, you benefit from theft protection...

...Conceptualization, Development, Manufacturing We are engaged in the conceptualization, development, and manufacturing of load handling devices for industrial use.

... a glance: • Particularly suitable for handling pallets and large containers. • Load capacity ranging from 500 to 2,000 kg, depending on the model. • Electro-hydraulic drive for intensive operation. • Stepless adjustment of the desired ergonomic working height. • Available in mobile and stationary versions. • Optional with rotating or special platforms and light sensors for position querying (special equipment).

... a secure hold during transport. The STriMo consists of a hard anodized aluminium plate including handle, three solid ball rollers and four moveable stop pins. The STriMo can take a load of up to 300 kg per ball roller (= 900 kg total load)!

... sets available upon request Description: Hub system for quick and flexible placement of systems, devices, or assembly tables, etc. Load capacity: 500 kg per lifting unit Material: Housing: Aluminum die-cast, Roll: Plastic PA, ball-bearing Roll housing: Zinc-coated steel Set: 4 lifting units 1 hydraulic drive unit 4 hydraulic hoses, each 3 m pre-filled...

...Hand chain for lifting equipment Security Level: 1 / 2.5 / 4.0 Tensile Force (TF): 75 N / mm² Manufacture Test Force (MTF): 188 N / mm² Breaking Load Limit (BLL): 300 N / mm²...

...The rollers for containers 4337.3.5 with a load capacity of 3.5 tons, designed for lifting and moving standard containers. Can be used on solid ground. The roller set consists of four corner brackets and a towing bar. This product is suitable for an operating speed of up to 6 km/h.

...Professionals who benefit from using lever hoists include construction workers, riggers, maintenance technicians, and contractors. Specifically, lever hoists can be utilized for hoisting loads onto the scaffolding, positioning heavy equipment, pulling vehicles out of difficult situations, and securing loads during transportation. They offer a portable and versatile solution for lifting and...

...For handling heavy loads, the 360° swivel load hook from RUD is used. Thread sizes range from M8 to M48. Thread:M8 Load capacity:0.63 t...

...xetto® is the all-rounder that goes along for the ride. It provides a crucial advantage when transporting, loading, and unloading heavy loads. With tailored original accessories, the functionalities of xetto® can be expanded according to needs, allowing for even faster and easier applications. Includes 1 piece of charger 230 V Maximum load capacity up to 250 kg Lifting time under 20 seconds...

...) - Earth-moving machines, loaders, excavators according to DGUV Regulation 100-500 (formerly BGR 500) - Powered gates according to DGUV Information 208-022 (formerly ASR A1.7) - Ladders and steps according to DGUV Information 208-016 (formerly BGI 694) - Calculation of theoretical service life - Lifting accessories and load handling devices according to DGUV Regulation 100-500 (formerly BGR 500) - Cranes according to DGUV Regulation 52 (formerly BGV D6) - Lifting platforms and loading bridges according to DGUV Principle 308-002 (formerly BGG 945)...

...safety factor: 7:1, material 100 % polyester with special reinforcement – reduced elongation. Easy to handle, light weight and insensitive to heat, cold or moisture; temperature range: -40°C bis +100°C. For safe lifting of load...

...*Telescopic ball screws for e.g. lifting platforms or hexapods. *Profile-less ball screws for e.g. motion mechanisms of handling devices and transport systems. *Linear actuators e.g. as an alternative to hydraulic cylinders or generally for working strokes. We are pleased to assist you with your application. Please feel free to contact us by phone or email. +49 711 459 98 775 vertrieb@hestego.de Diameter: from 5 to +200mm Lengths: up to 15.5 m Dynamic load capacity: up to 4,000,000 N Efficiency µ: up to 97% Accuracy classes (according to ISO 3408): P0, P1, P3, P5, T5, T7...

... brackets: 67 mm construction height (step profile - 23 mm step height) with four-finger claw; including lifting safety. Shelf covers with particle boards (V20 E1, 22 mm thick), including galvanized supports. The particle board is flush with the cross beams. Shelf levels adjustable in height without screws at intervals of 50 mm. Accessory equipment available. Surfaces: Support frames galvanized, Support cross beams RAL 5010 gentian blue Sections with particle boards or with steel segment boards...

...Mounting:In any position Positive stop:External positive stops 2.5 mm to 3 mm before the end of stroke provided by the customer. Material:Steel corrosion-resistant coating; Piston rod: Hard chrome plated steel; Rod end button: Hardened st Damping medium:Automatic Transmission Fluid (ATF) Application field:Portal systems, Machines and plants, Conveyor systems, Crane systems, Loading and lifting equipment,...

...Stable tripods for mobile use in conjunction with a fall protection device and rescue lifting equipment. • Load capacity for a maximum of 2 persons Optional with • Manually operated winch for loads up to 300 kg and a maximum rope length of 20 m • Quick-change brackets for winch and fall protection device • Carrying and protective bag These tripods are only approved for use in conjunction with a rescue and recovery system, e.g., ROLLGLISS for retrieval.

... beams through simple swapping of spacers • Adjustable options up to large HE-B beams with a width of 300 mm Balanced load distribution on four wheels through self-adjusting swinging around the bolt axis! Four safety tabs at the ends of the side plates serve as wheel break support, rail cleaner, and fall protection. The wheels contain permanently lubricated quality ball bearings with seals. By simply swapping spacers, PTM chassis offer adjustability for many beams.

... significantly larger area is available for force transmission compared to conventional devices. The advantages include lower wear on the guides and higher efficiency. • Low maintenance costs due to removable pump unit and replaceable sliding shoes. • Extremely lightweight with high performance thanks to high-quality materials and innovative design. • The swiveling tab ensures optimal adaptation to the load at all times. Always stable standing, even when lifted. • Tab forged in the die, making it extremely impact-resistant. Load capacity: 15 t Lifting height: 175 mm...

...Load capacity 150 kg, Lifting range: 225 - 740 mm The WSHT series lift table trolleys offer everything a good lift table trolley should have - and at an attractive price. Technical specifications: Device type: WSHT 150 Load capacity: 150 kg Lifting range: 225 - 740 mm Table dimensions: 740 x 450 x 35 mm Wheel equipment: PU wheels 12 months warranty Price incl. 19% VAT 285.60 EURO Delivery time: 1 week from factory, subject to prior sale FREE SHIPPING WITHIN GERMANY (MAINLAND)...

...Construction and manufacturing of custom, component-specific lifting devices with declaration of conformity (CE), 3D model. UVV testing of lifting devices/hoisting equipment. Our Services - Support and guidance in development, planning, and manufacturing - CAD designs - Static calculations - Practical development directly on the component - Prototypes, sample construction - Individual, series, and custom manufacturing - CE markings - Precision cutting - Flame and plasma cutting - Shearing, bending, and sawing - MIG, MAG, TIG, spot, and manual welding - Stainless steel and aluminum processing...

... least 3,200 mm Load capacity of operator platform: 100 kg Total width (with guide rollers): 1,020 mm Device height in resting position: 1,960 mm Own weight: 1,015 kg Travel speed: 1.00 m/s with raised operator platform. 0.20 m/s Drive: electric Fork tines electrically adjustable Load capacity: 150 kg Length: 600 mm Height adjustment: 0 – 5,230 mm Scope of delivery: Giraffe, 2 keys, and an operating manual Warranty: 1 year on mechanical parts - exclusively for commercial use -...