iso ts Germany

...Steel/g galvanized and colorless chromated. Stainless/passivated steel We specialize in quick-release fasteners made from galvanized steel, hard bronze, and stainless steel. All our fastening variants are produced according to DIN EN ISO 9001, TS 16949:2009 and meet all common aerospace standards (LN). We supply quick-release fasteners for tensile loads ranging from 500N to 45,000N in various...

.../Au (ENEPIG), chemical Sn, chemical Ag, OSP (Entek), galvanic Ni/Au, Carbon, Ag/Pt (thick film technology) and others Solder mask and silkscreen • Various coating systems (including halogen-free) and colors Standards • ISO 9001:2008 / TS 16949 • UL listing • RoHS / REACH • Manufacturing according to IPC A600 Class 2 and 3 Delivery Times • Express service from 1 piece • Series from 10 pieces Special technology upon request...

...Microwave measurement device, Continuous In Line measurement of dry matter The measurement is contactless, the measured values of the %, %H2O,%TS, Bx, g/cm3, g/l or mg/l content are available as digital and analogue values. The HK2 is applicable in different industries like sugar, sewage plant and building material industry. Because of further increasing quality requirements after ISO and EU standards, the industries have an enhanced demand for improved quality control, standardization and InLinetrend observation.

... changes can unlock significant savings potential or enable higher technical requirements. The processes in logistics offer further optimization opportunities. Your Benefits: Intelligent and economical solutions Custom components Many years of experience in design and manufacturing Certified quality management according to ISO TS 16949...

...The Interseal Laboratory offers a range of services to analyze your inquiries and provides suitable material recommendations for your applications. Physical Analyses: Shore Hardness: DIN ISO 48 - ISO 868 Density: ASTM D792 - ISO 1183-1A Mass: ISO 3601 Chemical Analyses: Infrared Spectroscopy: ISO 4650 / NFT 46-054 TGA Analysis: ASTM D6370-99 / ISO 11358 ODR Rheometer: Reactivity Measurement (Ts...

... development. Certified according to DIN EN ISO 9001, ISO 14001, ISO 50001, and ISO TS 16949 (BGH Lugau). Production in accordance with ASME and NACE regulations. Approvals from national and international certification bodies such as ABS, TÜV, LRS, DNV-GL, BV, and various customers.

... effort. - Compliant with ISO 9000 ff., ISO/TS 16949, VDA, QS 9000, and HACCP - VDA 5 suitability proof - Standard-compliant MSA / Measurement Capability Study (MCS) - Representation of test plans according to VDI/VDE 2618 - Dynamic usage/location-based testing intervals - Complete test histories for characteristics and measuring instruments - Evaluation of measuring instrument suppliers - Integrated test plan management - Test histories and measuring instrument lifecycles with usage and storage locations - Extensive standards and fit libraries integrated - Manufacturing-supporting calibration...

...-oriented quality management system according to DIN ISO 9001 and ISO/TS 16949 (in their respective current versions). The continuous development of our QM system ensures that we can meet our customers' expectations tomorrow as well.

... Swinghandle model 1107 manufactured by Emka Beschlagteile is made out of a GF black polyamide construction. It consists of a shaft brass having mixing materials with seal characterized by zinc plated design. Additionally, the roundrods of the product is not available for usage if doorgauge is (Ts) > 4 mm Type:swing Applications:door Material:polyamide...

...Even before the introduction of the relevant standards, quality assurance was considered the top priority of our corporate policy. In 1999, our company was first certified according to DIN ISO 9002:1994. In the following years, our quality management system was adapted and certified according to the standards DIN ISO 9001 and ISO TS 16949. Compliance with customer requirements and thus achieving...

...Production of splined shafts and torsion springs according to your requirements using state-of-the-art machinery with certified quality management according to ISO TS 16949:2009. Special Solutions: Do you have or wish for an application-specific product tailored to your needs? Please share your requirements with us using the provided inquiry form! We offer splined shafts and torsion springs in...

... accessible to forklifts or heavy construction equipment. Particularly in the latter sector, SP grates have the advantage that each filler bar is welded to the load bar, allowing the grid grates to withstand heavy vehicles with rubber or chain wheels. Our welded press grates are available in the following formats and specifications: Mesh size 31 x 31 millimeters (spacing 34 x 38 millimeters) Mesh size 31 x 16 millimeters (spacing 34 x 19 millimeters) Grate heights (load bar) 25 to 120 millimeters Load bar thicknesses (TS) 2.3 and 5 millimeters TS length max. 3,000...

... according to ISO / TS 16949, ISO 9001, and ISO 14001. Furthermore, the complete satisfaction of our customers, the corresponding service, and a focus on environmental protection are particularly important to us.

...For our customers in the automotive supply industry, we manufacture precision parts made of steel and non-ferrous metals with surface treatment. From foils to high-strength spring band steel - complete system solutions, procurement, and inventory management. Among other things, EK stamped parts are used in the chassis, steering, and exhaust technology in automobiles. Our customers rely on the adherence to the highest standards - as we meet the most demanding standard ISO TS 16949 throughout the company.

For over 75 years, Monninger has been the expert in stainless steel and steel springs. Experience, customer relationships, and quality awareness have always been the foundation of our success. As early as 1994, we were first certified according to ISO 9001. In 2012, we entered a new era with certification according to ISO TS 16949, which shapes all our actions. The solid company has long since...

... management, we rely on the latest technologies. Every lamp and lighting system that leaves our factory has been thoroughly tested using highly advanced measurement technologies. We have over 500 different specialty lamps and more than 100 different automotive lamp types ready for you. Our products under the brands NARVA and vosla carry the quality label "Made in Germany". The high standards in quality and reliability are supported in our company by certification according to ISO TS 16949.

... ensured by qualified employees, the use of technically advanced machines, and a holistic and sustainable concept for implementing the tasks set by the customer. It is important to us that the quality and cost-effectiveness of our work and products are closely linked to our responsibility for the environment and society. Our integrated management system includes quality, environmental, occupational, and health management. We are certified according to ISO TS 16949, ISO 9001, ISO 14001, EMAS III, and OSHAS and are users of the German Sustainability Code.

... a high quality level of our products. First sample inspection reports, e.g., according to VDA and PPAP, are a matter of course. All our locations are certified according to DIN ISO 9001. Our headquarters in Steinau an der Str. is also certified according to DIN ISO/TS 16949. Regular inspections by our customers guarantee a high quality level. We guarantee a quick response to your email inquiry at info@sico.de Contact us! There are many good reasons to work with us.

... Metall- & Kunststofftechnik manufactures: - Stamped and bent parts - Fine-blanked parts - Progressive composite parts - Plastic parts - Metal-plastic composite parts In addition, we also offer, in contract manufacturing: - Powder coating - Assembly of components We are certified: - ISO TS 16949 (2009) - ISO 14001 (2004)...

... business areas: Color Batch, Additive Batch, and Polymer Technology. Over 200 employees develop and produce at the state-of-the-art facility in Blankenhain (Thuringia), located in the heart of Germany, for both the national and international markets. The company group is certified according to DIN EN ISO TS 16949:2009 and DIN EN ISO 9001/2008. More information at: www.grafe.com Dipl.-Kfm. Matthias Grafe Dipl.-Ing. Clemens Grafe...

...professional users worldwide trust our products and application-oriented solutions. Klauke develops and produces electrical connection technology and special tools for the automotive industry, certified according to ISO/TS 16949:2009. Our solutions are used, for example, in wiring harnesses, engine concepts, or electromobility. Based on decades of accumulated know-how and state-of-the-art...

... successfully certified according to ISO/TS 16949 – the highest standard in the automotive industry worldwide. In-House Production We manufacture our fasteners and assembly systems ourselves. In Germany, France, Italy, Austria, Switzerland, North and South America, India, and China, we have our own modern production facilities and highly qualified employees for the efficient production of high...

The company Ewald Denker specializes in the production of turned parts. As a manufacturer, we can respond individually and flexibly to your requirements. Our goal is to meet customer wishes and achieve short and flexible delivery times. We are certified according to ISO TS 16949. We meet all common quality requirements for your products. With our ERP system, we achieve a transparent manufacturing...

...The company MT Welding Technology was founded by welding specialists with many years of managerial experience in ISO/TS 16949 certified suppliers for the automotive and commercial vehicle industry. In this way, we are pleased to offer you our services as a contract welding specialist for your products. When it comes to welding work on steel, aluminum, and stainless steel, we are your competent...

...We are a company founded in 2015 specializing in the manufacturing and product development of pipe mounting and fastening clamps. 30 years of professional experience enables us to offer you competent advice, especially for individual problem solutions and custom-made products. Our efficient technology allows for resource-saving and environmentally friendly production. Our goal is to stand by you as a flexible and reliable partner. We adhere to the guidelines of DIN EN ISO 9001:2015 as well as ISO/TS 16949.

... is located in Bietigheim-Bissingen, in one of the most innovative industrial regions of Germany. For over 40 years, we have been involved in compressor and pump technology. This extensive experience benefits our customers today. An innovative development department, state-of-the-art manufacturing facilities, and a certified quality management system, including ISO 9001, ISO 13485, and ISO/TS 22163...

... to complying with environmental regulations, utilizing natural resources more efficiently, and minimizing our waste products, applying the best techniques to prevent pollution, thus meeting our expectations. Our Goals ISO/TS 16949...

... Certification according to DIN ISO EN 14001, VDA 6.1, and DIN ISO EN 9001:2000 2008 Certification according to ISO/TS 16949 | 25th company anniversary 2010 Appointment of Ms. Carola Funk as Managing Director of FUNK FERTIGUNGSTECHNIK GmbH 2013 Ms. Carola Funk becomes Managing Director of FUNK DREIDIMENSIONAL Entwicklungs- und Vertriebs GmbH | 30th company anniversary 2014 Acquisition of EXERON...

...»50 years of experience and continuous development prepare us for the future.« FUCHS Kunststofftechnik is an expanding, modern family business based in the Oberbergischer Kreis. We see ourselves as a full-service provider and are certified according to ISO TS 16949/2002. For more than five decades, we have been working for an ever-increasing number of customers from almost all industries...