impeller Germany

Flow measurement technology has been our core business since our founding in 1966. Since 1976, Höntzsch has been developing, manufacturing, and distributing products in the field of flow and flow measurement technology as an innovative driving force in the industry and has been part of the DMT GmbH & Co. KG group in Essen since 2012. Höntzsch also offers solutions for special applications such as...

voxeljet – Your Partner for Productivity in Industrial 3D Printing voxeljet is one of the leading manufacturers of industrial 3D printing systems for tool-less production of molds and models for a variety of applications, with its own service locations in Germany, the USA, the UK, India, and China. Productivity in 3D: Printing Systems from voxeljet Whether in foundries, mechanical engineering, ...

...The container pump F 430 PP 100/50 made of polypropylene has been specifically designed for higher delivery heights and pressures. Instead of a rotor, it is equipped with an impeller in a pump housing. In conjunction with the powerful FLUX motors, it achieves a significantly higher pressure of over 3 bar in the flow rate range of up to 40 l/min, compared to barrel pumps with semi-axial rotors...

... Pumps The impeller made of PTFE is movably arranged on the pump shaft and is supported on both sides by sliding bearings made of SiC. Inside the pump housing, two SiC insert rings are arranged. A constant gap distance between these elements, regardless of prevailing operating conditions, is ensured at every tightening tension of the housing anchor screws.

Custom radiator fabrications and special parts for extreme demands. Motorsport, tuning, and industrial applications require maximum performance in tight spaces. To achieve more power, you need parts that meet high standards and can be easily installed and removed. Schweizer GmbH & Co. KG is your expert for custom radiator special fabrications in the fields of motorsport and industry. Additionall...

... pulse. Chips and dust are collected in mobile containers located underneath. The fan, positioned on the clean air side, is equipped with a high-performance impeller. The clean air outlet is lined with sound-absorbing material.

...PROCESS DATA MEASUREMENT AND PROCESS CONTROL ON HIGHEST LEVEL AND MAINTENANCE-FREEFollowing the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow ultrasonic - as a replacement for the current and widely used standard measuring variant with impeller, turbine or vortex - now makes contactless measurement according to the ultrasonic principle (without...

...Graphite Impeller System for Aluminum Degassing...

...KRK coaxial agitator features two different impeller systems for parallel mixing. The KRK has two interdependent agitator shafts with a different number of revolutions that move in opposite directions. The faster agitator shaft is supported in the slower hallow shaft of the geared mixing unit. The KRK series is primary suitable for the dispersing of highly viscous media. The heat transfer is promoted. Explosion-proof series certified to ATEX Directive 2014/34/EU zone 0 and zone 1.

...The impeller pump is a DRY self-priming pump suitable for many types of media, including viscous media! and liquids with soft solids. (Impeller resistance must be considered) Stainless steel impeller pump 80 liters/minute Displacement pump Flow rate up to 80 l/min Dry self-priming up to 5.0 m Pressure up to 2.5 bar *Optional up to 4.5 bar Weight: 15...

...Impeller Machining (including Special Impellers on HSC Machines) Our customers appreciate our technical expertise and our consulting for customized solutions. Since June 2019, we have fully climate-controlled rooms/halls at our new location in Illerrieden, equipped with ventilation and exhaust systems. We can machine workpieces with a cubic size of 1.5m and a weight of 3 tons using 5-axis technology. We can measure up to 3m in length and achieve an accuracy of 5µm, even with a workpiece weight of 3 tons.

Bürkert Fluid Control Systems is one of the world's leading manufacturers of measuring, control and regulating systems for liquids and gases. Bürkert products are used in a wide range of industries and applications – ranging from breweries and labs to medical, bio-engineering and aerospace technology. With a portfolio of more than 30,000 products, Bürkert is the only supplier to offer all fluid co...

...Bag filling with the BEHN + BATES impeller packer is achieving best filling results due to low-air filling and high filling pressure...

NITTO KOHKI Europe GmbH is a world-renowned Japanese designer and manufacturer of pumps & compressors, quick-release couplings, and tools. The air compressors, vacuum pumps, and liquid pumps are particularly well-suited for analytics, medical technology, and measurement technology. Our patented aerator compressors are used in small wastewater treatment plants and biogas plants. The quick-releas...

... which the pump is made. The pump should be installed in a closed, well-ventilated environment or at least protected from weather influences. Liquid temperature from -10 °C to +90 °C Pump body made of cast iron with anti-blocking system Impeller: Brass...

...The RV series fans are suitable for the transport of lightly contaminated air. Centrifugal fan with a closed impeller, designed for point extraction of contaminating or chip-producing processes. The transported air must not contain sticky or adhesive vapors or dust. Operating range: • Max. pressure: 5,800 Pa • Max. air volume: 32,500 m³/h • Max. dust concentration: 5 g/m³, non-sticky • Max...

...With VORTEX impeller | Suitable for wastewater Article number: 571599030021 Delivery height: up to 7 m Delivery quantity: up to 24 cbm/h Immersion depth: up to a maximum of 10 m Connection pressure fitting: 2'' internal thread Operation: with 230 V...

...Side channel blowers increase the pressure of the drawn-in gas through a series of vortices generated by centrifugal force in the peripheral ring channel. The rotation of the impeller sets the gas in each chamber into a rotational motion, while the resulting centrifugal force pushes the gas outward into the side channel. This creates spiral vortices. During these vortices, the gas is repeatedly compressed, resulting in a linear pressure increase along the entire length of the side channel.

... Precision parts for medical technology (CT systems, MRI systems, etc.) Impeller blades for various wind installations (wind tunnels, tunnel ventilation and exhaust) Submarine bearing shields Art castings Various custom productions and solutions...

... we can only show the tip of the iceberg. Challenge us! Nominal diameters: DN 150 - DN 500 Length: EBRO factory standard Flange standards: EN 1092 PN 6/10/16, ASME Class 150 Marking: EN 19 Temperature range: -20 °C to +100 °C, optionally up to +250 °C Housing: Lightweight metal full flange with recessed stainless steel inner ring Impeller: Stainless steel, optionally mirror polished Drive: Gear motor 230V/400V 50Hz/60Hz, 30 min-1 to 100 min-1, application-specific...

... the balancing of a fan impeller, since a balancing machine and special know-how are needed for this. Rippert uses state-of-the-art balancing machines in accordance with DIN ISO 1940 for this. Stationary balancing Rotor size: max. DN 4,000 mm Rotor weight: max. 10,000 kg Measuring procedure: force measurement Balancing quality: Q 6.3* * other qualities on request On-site balancing In addition to...

...oddesse-propeller pumps are used for irrigation and drainage of agricultural areas, water-level regulation, oxygen enrichment of breeding water at fisheries, trimming of ships, ferries and tankers and so on. EXECUTIONS - Single-stage centrifugal pumps with open semi-axial impeller - Submersible, rewindable and water-filled motors with protection level IP 68 - Motor cooling through...

...Medium Pressure Radial Fans Type: DCMR Air performance 5,000 to 75,000 m³/h up to max. 3200 Pa Static Pressure high efficiency due to backward-curved impeller partly on bearing...

...TECAU Radial Fans - Housing made of sturdy painted steel sheet. The impeller is statically and dynamically balanced and is directly driven by a three-phase motor. www.tecau.de...

...Tear Fans for the Shredding of Continuous Material with Replaceable Knife or Saw Blades on the Impeller Blades Tear fans shred continuous materials such as edge strips that are generated during the production of paper, cardboard, and fiberboard. The fan is designed based on the width of the edge strips, rolling speed, type of material, and thickness. The tensile strength and coating of the waste are also determined and factored into the calculations. The impeller blades are equipped with replaceable knife or saw blades that cut the continuous strip into pieces.

... advantages: »»highest chemical resistance »»robust design - without vulnerable (floating) axles »»low-maintenance through double hydro-dynamic slide bearings with extra big radii »»long-lasting and wear-resistant through axial thrust compensation »»half-open impeller (i.e. solids up to 3 mm of grain size and 10 Vol. % are possible) »»no metal parts are in contact with the medium »»easy to maintain (wear parts can be changed swiftly) »»universally applicable, quiet and compact »»available as explosion proof version for combustible environments...

...Pressure tight 16 bar, threaded machined, sealing surface flatness 0.1, partial coating, impeller surfaces and sealing seats finished cast.

...In addition to common alloys, we also process special alloys upon customer request and according to specific product requirements. Two shaft furnaces, crucible furnaces, and an impeller system are available for melting preparation.

...Multistage centrifugal blower in cast segment design -Reliable operation: Due to the design-related turbulence-free flow, good acoustic damping from the thick-walled cast housing, and dynamic balancing of the entire impeller assembly. -Easy installation: The blowers are factory-assembled on a base frame. -Compact design: From the compact unit to higher performance. -Oil-free air: External bearing...

...Flotators Flotators are one of the most efficient systems for the continuous removal of oil and suspended solids from water, when elevated flow rates are involved and high separation performances are required. Tecniplant is specialized in the design, engineering and construction of Impeller and Injector Flotators for oil-liquid separation (IAF, IGF, IDF, EDF)...