glass coatings Germany

...Diameter: 7-200 mm ROC: 10mm - plano Size tolereance up to +/- 0,01 mm Center thickness tolerance: up to +/- 0,02 mm Surface quality: up to S/D 10-5 Irregularity: (Plano surface): L/10 Form Error Z (Aspherical surface): +/- 0,2 um Centration: up to 30“ Coatings: Coatings according to customers requirement Materials: All optical glass from SCHOTT, OHARA, CDGM and SUMITA Crystals Quarts other material on request...

...With the spacer-free insulating glass OKATHERM, a wide range of design and functional concepts can be realized. A broad selection of different types of glass, coatings, and constructions provide protective and utility functions for facades and roofs, addressing the specific functional requirements of architects and planners. Additionally, by combining OKATHERM insulating glasses with other OKALUX solutions, a uniform facade appearance can be ensured.

...2-component HYDRO Acrylic PUR paint for universal back glass coating. - Colored topcoat for glass coatings with very good resistance to chemical and mechanical stresses. It is lightfast, durable, scratch-resistant, and features an even pigment distribution. The material dries to a uniform paint film at room temperature, providing excellent adhesion to the glass substrate.

...Metallic reflection coatings enhance reflection and are used in many optical instruments for light deflection. We coat glass, metal and plastic. The choice of coating material depends on the reflection requirements in the defined wavelength range. We use aluminium, gold, silver and chromenickel, either with or without protection coating for the VIS, UV and IR ranges. ...

...E-glass fabrics with additional cut-resistant treatment have increased cut and abrasion resistance and can be used in applications with higher mechanical loads. The coatings protect the material from fraying and reduce the formation of fiber dust. Application temperature: up to 550°C Application limit temperature: approx. 600°C Designs: made from smooth yarns Coating: 2-sided cut-resistant treatment in various colors Material thickness: 0.2 - 1.0 mm Standard width: 1000 mm Format: roll goods, blankets, cut pieces, stamped parts, custom configurations...

... highstrength, heatresistant or fireproof, or free of asbestos and fibres. We can also customise desired processing properties such as viscosity and longterm storage. If required, we produce the water glass based sealant separationfree, so that no sedimentation occurs during a container's storage.

...Glass is not as smooth and even on the surface as it seems. Even new glass resembles - on a microscopic level - a crater landscape. Dirt and limescale adhere to the glass surface. Many substances also react chemically with glass and cannot be removed with conventional cleaning agents. To solve this problem, a special coating technology has been developed. By treating glass with BriteGuard, the glass surface receives a kind of Teflon layer. Dirt adheres less and is easier to remove. Especially suitable for showers, roof glazing, glass furniture, mirrors, and sandblasted glass.

... microporous thermal insulation material with an extremely low thermal conductivity, meaning it has very good insulating capacity. SILCAPOR Ultra 950 and SILCAPOR High 1050 are rigid boards and can be supplied with various coatings (PE film, aluminum foil, glass fleece) to protect the microporous structure. In addition to dust-free handling, there is, depending on the variant, additional protection against moisture. SILCAPOR-FP 1050 is a thin, flexible board. The double-sided coating with a biodegradable felt (thickness approx. 0.5 mm) and the standard...

...Coatings for metal surfaces, plastic surfaces, glass, textiles with many different properties such as antiviral, antimicrobial, gold, corrosion protection, colors, etc.

...On the surface: spotless. Upon closer inspection: clean industrial coatings of the demanding kind. Painting L 10000 x W 2500 x H 2500 1K paint, 2K paint, max. weight 400 kg Cleaning, automatic L 1545 x W 1545 x H 1000 Glass bead blasting L 6000 x W 2500 x H 2500, grain size 70 - 110 µm...

...Coatings in RAL colors are also possible on request! The equipment is variable. Equipment:Schuko, CEE16 Design:cylindrical Ground:Asphalt, Concrete, Stone Protection:IP44 Material:Stainless steel Color:Stainless steel Surface:glass bead blasted...

... flexibility Compensators are used in smoke extraction ducts or permanently in flue gas lines in the aluminum industry. They are a crucial component when it comes to compensating for the thermal expansion of metal pipes. Therefore, soft material compensators must be made from flexible fabrics that allow for the compression of the compensator components. Coatings for soft material compensators Coatings can be applied on one side or both sides. These are applied multiple times to achieve air tightness. With each coating step...

... with drilled holes or rounded corners. You can also order test specimens made of any common materials such as wood, glass, aluminum, steel or plastic for the TABER abraser test. From various metals From various plastics With boreholes Bare or pretreated Degreased and vacuum-packed Various sizes upon request Coil-coated aluminum or sheet steel upon request ...

... material and can be welded into endless belts for transport drives. Properties • Areas of application: Linear drives, transport technology • Color: anthracite • Material: polyurethane • Bulk material and endlessly welded belts • Coatings: Type T, T-groove (TR-1), PU-yellow, Supergrip, PA on the tooth side • Usable in wet areas in the appropriate design • Profile: AT10 BAS • Bulk material on rolls of...

...We prefer to shine through performance. You can see that in the surfaces we treat. However, professional surface technology is more than just the right paint. All parts to be coated must first be properly prepared. Our employees use blasting media of varying intensity and effect, such as corundum or glass beads. They clean, sweep, treat non-ferrous metals, and apply a thick iron phosphate coating if necessary.

...Often, there are specific requirements for the component surface. The manufacturing processes in sheet metal processing often include surface treatment carried out according to customer specifications. In addition to powder coating and painting, we offer our customers nearly all coating options. Many finishing processes, such as glass bead blasting, grinding, and etching, can be performed in...

...We paint your mass-produced small parts made of metal, plastic, wood, or glass.

...Bluing of brass, copper, bronze, and steel as design surfaces according to customer specifications. Vibratory grinding, angel hair, brushing, grinding, or glass bead blasting as a base and combination with designs. Blued panels, laser cuts, and edge elements made of BRASS, BRONZE, COPPER, or STEEL. We manufacture the surface according to your ideas.

...We offer you a wide range of surface treatments, including all paints and colors according to your wishes and specifications. Painting is done either via our paint line or in separate spray booths with water or dry wall extraction. Our range includes: -Water-based paints -Matte paints -DD paints -High-gloss paints, sanded and polished -Oiled surfaces -Stained surfaces -Patina -Glass surface coating...

... foil your products for you, or apply glass and ceramic blasting to create uniform surfaces. The following options are available to you: • grinding grain 240 • grinding grain 320 • grinding grain 400 • grinding grain 600 • grinding grain 800 • double grinding • industrial polishing • high-gloss polishing • mirror polishing • brushing • glass bead blasting • ceramic blasting • foiling...

...Different matrix systems depending on the requirements (e.g., polyester, epoxy, silicone resins) Different fiber materials (e.g., glass, aramid, basalt, carbon fibers) and semi-finished products (fabrics, mats, nonwovens, unidirectional and multiaxial fabrics)...

...which is temperature-resistant up to about 160°C, or glass-fiber reinforced materials for high winding tensions. There are no limits to the coloring; black is standard.\n\nSee also the section on injection molded parts with a list of available tools.\n\nImage 3 Image 4\n\n3. Powder Coating\n\nThe process known as \"spiral sintering\" is commonly recognized. Here, a powder is applied to the core...

...For insulated glass production, reliable quality control is indispensable. Consequently, reliable test methods are even more important. With HELANTEC devices, you get the technology to check the quality of your products. All devices are easy to use and very accurate. The GLASS METER is used for checking the thickness and distance of the glass panes, as well as the coatings. Features reliable...

... period, the permanent coating forms a glass-like barrier layer just a few micrometers thick, with high chemical and mechanical resistance as well as high surface tension (hydrophobic properties). The outstanding self-leveling or micro-planarization provides no adhesion basis for dirt particles. Furthermore, the coating is effectively protected from corrosion undermining. A lasting gloss and color intensifying effect is also achieved. CERTIFIED ACCORDING TO: DIN EN ISO 9227, DIN EN ISO 6270-2, DIN EN ISO 16474-2, DIN 50021.

...In addition to traditional grinding and polishing work, we also carry out metal cleaning or matting of metal surfaces using a glass bead blasting system. A special highlight is the repair chrome plating of classic cars or the coating of individual parts and small series.

... interesting and sophisticated design possibilities through various color design techniques. Classic finishing methods such as sandblasting, painting, or film coatings create color accents. Modern techniques, such as digital printing, open up entirely new design possibilities. Advanced modern technologies and years of expertise are our guarantee for your creatively designed living space. For the realization of glass in interior spaces, we offer a comprehensive product range.

... can respond to individual customer needs in production through a lean storage system and optimized production processes, thus remaining very flexible. High-quality production is always the priority: • In-house painting facility for perfect paint surfaces • Use of all common materials: wood, metal, plastic, glass, stone, fabric, leather, etc. • High-pressure press for laminate coatings • Distribution and assembly by qualified installers, including the installation of your goods.

With the growing automation, functional surfaces are becoming increasingly important. Constructively sophisticated components and manufacturing processes reach physical limits due to their material properties and can no longer be significantly optimized. Functional surfaces offer a coating solution precisely tailored to the application and a very large optimization potential. Valuable production ...

...Wet coating of plastic, metal, glass, or wooden parts. Plastic parts, metals such as steel or aluminum, glass, or wood are coated in our company using the wet coating process. We paint both individual and series parts for you in various color systems such as RAL or NCS.

...Through our own heat treatment facility, we are able to handle rapid production of workpieces. In addition to glass bead blasting, we can perform all common surface finishing processes upon customer request.