... hazardous areas we produce in protection class „Ex d“, „Ex de“, „Ex e“.
On request, CSN® circulation heaters are supplied with optimized process controls. Please contact us to talk about the most appropriate control system. Schniewindt is certified by the Lloyd’s Register to produce equipment according to the Pressure Vessel Directive 2014/68/EU and a certificate from TÜV (Technical Monitoring Agency) certifies that we meet the prerequisites for welding procedures according to AD 2000 Merkblatt HP 0 / DIN EN 7293.
...Flameproof mini line heaters
ATEX Ex II 2 G Ex’d’ IIC T4-T6 nach EN60079-0 und EN60079-1 The Exheat range of flameproof mini line heaters consist of a screw plug or flanged type immersion heater mounted in a thermally insulated heating vessel. They are designed to efficiently transfer heat to a flowing medium (liquid, air or gas). All flameproof heaters are fully ATEX certified and designed for use in zone 1 & 2 hazardous areas, gas group IIC.
... extended range of air heater variants comprises:
-> Heaters for Laundry Dryers (series & spare parts types)
-> Heaters for Cross Flow Fan
-> Heaters for Powerful Radial Blowers
-> Heating Crosses & Special Designs
Various special designs for airflow heating, deploying heater spirals on insulating mica support, are available. They are required when the available space for installation is limited and defined geometrical air ducts do not exist. All special open wire heaters are individual designs, i.e. custom-made.
...
Welcome to …
… TGA Energietechnik Wittenberg GmbH. Founded in May 2002 as a young company with decades of experience (since 1970), we have evolved from a small district heating station manufacturer into a powerful medium-sized and, above all, customer-oriented partner with around 70 employees.
We focus on your individual needs and offer you everything from a single source - the installation of dis...
... level of safety.
Ascentec heaters are fueled with gaseous fuels such as natural gas, propane, butane, hydrogen, or residual materials, or liquid fuels such as light heating oil (diesel), kerosene, mazut, heavy heating oil (HFO) up to Negylengyel. Additionally, liquid and gaseous waste fuels can also be burned using special burners.
...With the module package electric heaters, forced circulation tube bundle heat exchangers for liquid and gaseous media can be thermally and hydraulically designed.
... gas (NACE)
Design for low temperature down to -50 ° C
Design pressure up to 300 bar
Customer-specific nozzle arrangement
Water jacket design as pressure vessel
Water tank vessel for hot water> 100 ° C
GENERAL
Indirect water bath heaters type VH are heat exchangers (heat exchangers) which can heat the gas decentrally if no hot water treatment (for example a boiler system) is available. The heating of the gas is necessary in order to counteract the Joule-Thomson effect during pressure reduction or to provide a defined gas temperature for the following system components.
The most common...
... connected to telemetry systems
Adjustable pressures, flows and blending ratios
Gas quality conversion from H-gas to L-gas, if required
Thanks to the modular design of the system we can build a mobile station tailored to your specific needs complete with all necessary modules such as filters, pre-heaters, instrumentation and control equipment.
... oil systems in the long run. Contaminations and deposits reduce flow and increase wear. In the worst case, defects in heaters, pumps, seals, and valves can occur. Additionally, the core function – heat transfer – is severely affected.
The NESS fine filter stations continuously remove the smallest particles in a side stream, thereby increasing the service life of the heat transfer oil, as well as the operational safety and effectiveness of the system.
...Telco electric heaters are small and compact flowheaters that provide comfortable warmth. Telco electric heaters have a higher output per unit length than most others.
... within an outer quartz tube. For the hose connection, this quartz tube is equipped with a rotating part on one side. The electrical connection is made on one side.
Other special features of our infrared heaters include:
• Continuously adjustable 0-100%
• Response time of approximately 2 – 10 seconds
• Outer quartz melting point up to 1000°C operating temperature...
...Instantaneous water heaters consist of the flange heating element and the flow pipe with counter flange, inlet and outlet, drainage, venting, and base, suitable for horizontal and vertical installation.
...Industrial radial fan (without integrated motor) with high flow rates and various options for preferred use as a box fan unit.
Areas of application:
Heaters and air conditioning units, box fans
Construction:
The housing is made of corrosion-resistant, galvanized steel. The galvanized impeller with double intake is mounted on noise-tested ball bearings and is efficiently protected by rubber...
... drinking and service water. It protects the entire household installation as well as downstream devices (such as dishwashers, water heaters, etc.) from malfunctions and corrosion damage caused by foreign particles like rust particles, chips, sand, etc.","Flow Rate (m³/h)":"2.6","Maximum Operating Pressure (bar)":"16","Maximum Water Temperature - Plastic Shell (°C)":"40","Pressure and Cost Reduction...
... designed in such a way that turbulent flow is still achieved. The design is based on boundary conditions such as the type and properties of the respective medium, pressure and temperature, as well as the desired operating points in the process.
With inline heaters, the media are heated directly; electrical energy is converted into thermal energy in the heating elements. This thermal energy is then transferred from the heating elements to the medium. It is important to align the construction with the boundary conditions, as each medium has its specific properties.
Share product...
Döbeln Elektrowärme GmbH (DEW) is a complete provider for the development and manufacturing of electric heating elements. From tubular heating elements to heating cartridges and surface heating elements: Our products and solutions have been used for decades wherever safe and efficient heating is required. DEW relies on a close integration of engineering performance and in-house production, as well...
... containers. Our manufacturing of tubular heaters and heating cartridges is designed for both prototype construction and series production. Customized special solutions can be implemented quickly and easily.
Our products:
- Tubular heaters
- Heating cartridges
- Screw-in heaters
- Instantaneous water heaters
- Flowheaters
- Electric heat exchangers
- Heating plates
- Special solutions for electric heating
For inquiries, please contact our team; we will find an individual solution for your application.
Pipe heaters Fin tube heaters Screw-in heaters Finned heaters Switch heating Flange heaters Heating registers Air heatersFlowheaters Special heaters.
Our company VULCANIC TRIATHERM GmbH is a medium-sized enterprise in the electric heating industry located in the South Thuringia region.
With around 240 employees, we produce electric heating elements of various types and applications.
Our success is based on highly motivated and highly qualified employees who stand for quality, reliability, and innovation.
... manufactured and delivered on time. The entire material flow and all components used are subject to a comprehensive quality inspection – whether for individual boilers, thermal oil heaters, heat exchangers, or complex thermal oil systems. Whether small or large, whether national or international, HTT always delivers technical excellence.
... factors such as temperature, flowability, and flow rate are in optimal relation to each other. This is precisely where significant improvements can be made through the use of our high-quality heating hose systems, as they eliminate environmental factors such as temperature fluctuations, condensate formation, flocculation, etc. Only in this way can consistent quality of your product be ensured with the...
...Complete heat pump in monoblock/split design consisting of indoor and outdoor units.
For space heating, space cooling, and domestic hot water heating.
- 6kW - 120kW (modularly expandable)
- HIGH PERFORMANCE flow temperature above 60/70°C
- Whisper mode 42 dB(A) at 2.1m
- Refrigerant R290 (propane) / R32
- Integrated electric heater 3kW
- Automatic measurement of power generation (C.O.P)
- Touchscreen control panel and app control...
...GC-heat Gebhard GmbH & Co. KG is a leading manufacturer of industrial electric heating elements. The product portfolio includes heating elements ranging from coil tube cartridges to high-performance heating cartridges for tool heating, as well as heating cartridge flanges, classic instantaneous water heaters, and radiator elements in the field of gas and liquid heating.
... customized solutions in thermal technology
Starting from immersion heaters and drum heaters with electric or steam heating to fully automated heat treatment systems with mechanical loading and unloading, it now encompasses the entire spectrum of thermal technology and associated handling systems.
The longevity and safety of WILL & HAHNENSTEIN devices are complemented by a comprehensive service...
...We are an engineering company specializing in electric heating technology, focusing on the planning, design, and delivery of heating devices for buildings, rooms, marine, and offshore applications,
heating fans and convectors in safe and explosion-prone areas (CE/ATEX),
process heat, flowheaters, and instantaneous water heaters for liquid and gaseous media in safe and explosion-prone areas (CE...