extruded parts Germany

...Semi-finished products and custom-made parts from coal, extruded and isostatically pressed graphite...

...extruded heat sinks, die-cast heat sinks, as well as finger heat sinks and U-shaped heat sinks, along with the corresponding accessories like mounting clips for fastening. Extruded profile heat sinks are considered classics among PC board heat sinks. We gladly recommend them for use in the board area as they are versatile and can dissipate relatively large amounts of heat.

...Custom cold-formed pressed parts for automotive applications Series production of custom cold-formed pressed parts according to customer specifications. Manufacturing of extrusion products in the automotive sector.

Most modern production facilities at the Herford location Located at an easily accessible site directly off the A2 motorway, the German location of INOMETA is situated here. The company boasts more than 16,000 square meters of state-of-the-art production space across three halls, including a fully automated high-bay warehouse with over 1,800 cassette slots for the daily supply of goods such as al...

The Linn Präzision Group has been a competent partner for customers in the automotive supply industry, aerospace sector, plastics, foundry, and electrical industries since 1965. Our wide range includes turned parts, cold flow-pressed parts, and fasteners in the areas of stamped-bent parts, wire-bent parts, and pipe-bent parts. A particular focus for standard parts is on DIN 16903, which we keep i...

... column chamber • Internal cable routing • IPC and keyboard shelf holder can be positioned individually • IPC holder with graduated tilt control • Optional integrated control elements (to fulfil the Machine Directive 2006/42/EG) • Column of high-quality extruded aluminium sections (naturally anodised, 2-chamber column) • Customer-specific length of the column possible Material:Aluminum...

...aluFACE is an extremely versatile and adaptable command container, available in six different versions made of die-cast aluminum with a window featuring extruded aluminum profiles. It is ideal for any type of command and industrial information technique. Inside, mounting domes for motherboards, support rails, or mounting plates are already pre-installed. You can find the appropriate suspension system in the corresponding product category on the ROLEC website. EN AC 44300/EN AC-44200 (DIN EN 1706): Aluminum...

... directions. In extruded qualities, despite identical grain size, there is a certain orientation, which can lead to differences in properties both parallel and perpendicular. GleitTherm® G 400 | G 450 | G 600 Parts made from graphite composite materials In addition to pure graphite materials, there are also graphite-reinforced materials with lower temperature resistance. In a resin matrix, reinforcement fibers and graphite are incorporated as a lubricant. These materials provide an alternative when higher compressive strength is required, but the...

...PE foam white 1.5 mm double-sided adhesive covered with blue, siliconized polyethylene paper Adhesive: modified solvent acrylic Thickness: 1.600 mm Adhesive strength: 18 N/25 mm foam tear Temperature range: -40° C to +80° C The foam adhesive tape is characterized by a high initial adhesive strength, even on rough and critical structural surfaces. The high-performance adhesive is suitable for bonding extruded plastic parts such as trims, hooks, profiles, cable ducts, signs, holders, and dispensers. Rolls: 50 m Width: 6 to 1250 mm available as die-cut parts...

... equipment. They can be deployed in a half-barrel A-frame shape, and we can adjust the wind and snow load to your specifications. The Sunshade shelter for aircraft and equipment is easy to install on a concrete platform and can be weighted down or anchored to the ground. This extremely versatile protection solution consists of an extruded steel or aluminum frame and a fire-retardant PVC-coated roof cover. This canopy also comes with galvanized steel mounting parts for added robustness. Size: Fully customizable Waterproof: Yes Fire-retardant: Yes Anti-UV: Yes...

...The sleeves are manufactured in various head and shaft geometries. Due to the economical production on our multi-stage presses, significant cost savings can be achieved compared to conventional turned parts.

...SAVEOMAT COEX is a specialized application for co-extruded products. In the production of pipes and molded parts using the co-extrusion process, the precise feeding and exact mixing of the various material components are crucial. Whether in the production of conventional PE multi-layer pipes for reliable gas and water supply as well as wastewater disposal, or in the marking of pipes with colored...

... it suitable for high vacuum applications ✓ Custom color options available through anodizing ✓ Excellent thermal conductivity ✓ Capability for very precise processes, e.g., in the semiconductor industry ✓ Simple processing options ✓ No welding required, as parts are simply attachable Internal dimensions: 400 mm x 600 mm x 625 mm (LxWxH) External dimensions: 483 mm x 730 mm x 753/741 mm (LxWxH) Front panel: 16 U (1 U = 44.45 mm) Volume: approximately 150 liters Connections: 1 x KF 16, 7 x KF 40 Closure: Hinged door with viewing glass...

...A professional, payable cleaning and defatting we offer for specially produced Stamping parts Drawing parts Extruded components Turned parts Milled parts Products from electrical engineering and fine mechanics Parts from (electric) motor production Heat exchanging devices An optimal cleanliness of the elements has found its way to become an important quality characteristic. By our professional...

... is pinched at one end, welding it together and then air is blown into it. The air pressure inflates the TPE out to match the mould cavity. Once the TPE has cooled and hardened the mould opens and the part is ejected. Mediprene BM TPE We have designed the Mediprene BM TPE compounds to have high melt strength, giving time to close the mould around the extruded parison while allowing sufficient stretchability during inflation. They also offer good welding in the pinchoff area of the blow mould. They can easily be coloured and give a smooth surface to the finished part. Applications The TPE can ...

...We offer polypropylene press plates with thicknesses up to 280 mm that are free of voids and stress-free, thanks to the production process. We also provide cuttings and molded parts / technical plastic components (milled parts, turned parts) made from polypropylene sheets or rods. Unlike extruded sheets, press plates are less stressed and better suited for machining, but they have a price...

...The special Metzner development is a fully automatic machinery consisting of a contact-free loop control, an automatic cutting machine and a crushing station with storage system. It can produce polystyrene pipettes with diameters from 4 to 25 mm and lengths from 100 to 700 mm. The extruded material is first scored with the aid of several rotary cutting heads, then broken and finally deposited in collecting containers. The cycle time for four parts is only 1.5 seconds. For the production of short lengths (up to 120 mm), the cycle time is extended to approximately three seconds.

... Assembly parts: Aluminum, powder-coated (made from extruded profiles) Joint arms: Aluminum, powder-coated or anodized (extruded) Upper arm fork: powder-coated (forged) Middle joint fork, clevis, lower arm insert: powder-coated (die-cast) Double rope: Stainless steel with plastic coating Small parts/caps: PVC (depending on awning type and order, aluminum die-cast with powder coating is also possible) Screws: Stainless steel Awning fabric: Acrylic (solution-dyed) sewn with Tenara sewing thread Select...

... bonds PMMA plastics in numerous industrial sectors, such as: • Window construction: Bonding of PMMA additional profiles on co-extruded profiles, bonding of PMMA additional profiles on PMMA profiles • Advertising industry: Bonding of acrylic parts to each other • Showcase construction: Bonding of acrylic sheets to each other...

...Storage, Processing, and Customization of Extruded Aluminum Profiles Milling Whether it's milling, drilling, sawing, finishing, threading, countersinking, or notching – we are your partner for profile processing. With our Elumatec profile processing centers, we are capable of producing ready-to-install parts from aluminum profiles for you. We work efficiently and productively with small batch...

... • ... We manufacture sheets in any desired color from new materials. For this, we typically use a comprehensive standard range of color granules. Of course, special color formulations are also possible. A special offer is the take-back of your in-house, pure edge trimmings and scrap parts, which we will grind and reprocess into sheets for you.

...Polyamide 6 (PA6) is the most well-known extruded polyamide and offers a balanced combination of all typical material properties of polyamides. Application: • Gears • Hammer heads • Impact and shock-loaded parts Properties: The main properties of PA 6 include: • Good mechanical strength • High impact toughness • Good damping capacity Characteristics: In comparison to the cast variants, this...

... thicknesses of 15.0 or 20.0 mm. 3. Absorption Profiles The absorbers, bent from seawater-resistant aluminum with a high perforation ratio, are invisibly attached to the frame parts using stainless steel springs. The internal mineral fiber strips with a raw density of 100 kg/m³ are fully laminated with glass fleece. This achieves a sound absorption of 4 dB. 4. Design All aluminum materials can be color-customized and can be used in combination with other noise protection elements made of concrete, wood, or aluminum.

... anodizing is applied to extruded profiles and turned parts, as well as to die-cast, cast, and stamped parts, and to wrought and forged alloys. Coating thickness: up to 100 µm Bath size: 235 x 55 x 100 cm Contacting: individually defined Possible pre-treatment: pickling, descaling, degreasing Possible post-treatment: densifying, drying Delivery: Mon-Fri 07:00-16:00...

...Material: Band parts made of aluminum (extruded profile), pin parts made of corrosion-resistant steel Storage: Plastic rings Design: DIN LS, DIN RS...

...PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with...

...Our product range of board level heat sinks includes various designs such as sheet metal bent parts, extruded, die-cast, or pressure die-cast profiles made from aluminum and copper. Some products come with integrated solder pins for direct mounting on the circuit board. The board level heat sinks include: finger heat sinks, clip-on heat sinks, small heat sinks, and heat sinks for DPAK. Surfaces: various surface treatments available.

...Light & stable construction made of anodized, extruded aluminum • ErgoTec safety cone • secure twist lock or internal lock • for easy cleaning of hard-to-reach areas Item number: EZ500 Ready for shipping: 2 - 20 business days EAN: 4017942991958 Manufacturer item number: 4056166078533 Dimensions: 2 x 2.50 m...

... and hot formed parts, screws for plastics and metals, free-form technology, turned parts, and custom fasteners. The production facility is located in Istanbul (Turkey). Additionally, the company has regional branches in Houston (Texas, USA) and Stuttgart. Istanbul was deliberately chosen as a location due to its strategic position between three continents, allowing for rapid worldwide product...

... our services in the production of turned parts and other products at competitive prices. With us, you can expect short decision-making paths and competitive prices. Even though it is not common in the industry: with us, you can count on the fact that if you order today, it will be delivered by tomorrow. Thanks to our favorable central location near Dortmund and other major cities in the Ruhr area, our turned parts are quickly delivered to our customers on-site after ordering and production.