dry cooling Germany

...max. size 37 x 52 cm age 2000 CP-Tronic Alcolor film dampenings cooling unit Technotrans Autoplate automatic washing devices dry sprayer Grafix Alphatronic + version Ref: HE230104A Please ask for price. We ship and install worldwide!

... pressure chamber and flow of the cooling lubricant through the filter medium into the filtrate drain chamber • Initiation of filter regeneration by pressure measurement or time lapse • Dry blowing of the dirt cake before discharge • Fully automatic belt cleaning with brush or beater shaft and belt rinsing • Circumferential filter belt, optionally also with fleece operation Typical use cases...

...The dry cooler from N-thalpie GmbH is used in refrigeration and air conditioning systems to dissipate the thermal energy from process fluids (e.g., coolants or refrigerants). Unlike water-cooled systems that use water as a cooling medium, dry coolers use air as the cooling medium.

...Cooling capacities 63 - 1,220 kW Dry coolers (air-cooled) with or without adiabatic function Ready-to-connect unit with integrated pump and temperature control For cooling the condensers of water-cooled devices (such as ABF, Air+, etc.) also suitable for hydraulic cooling...

... tank and are optimal for pumping aerated lubricants (emulsions or cooling and cutting oils), due to the high chip detachment from turning, milling, or grinding. SBA series with optional SAE flange for vertical or horizontal pipe connection with G ¼ pressure gauge connection. Flow rate: Up to 2200 l/min Lifting height: Up to 62 m Media: for cooling liquid, refrigerants, emulsions, oils Drive...

... Retractable Housing; for RH sensor Very High Temperature 90ºC; for Dry Cycle operation, CCX2000/3000/4000 Very High Temperature 90ºC; for Dry Cycle operation, CCX9000/11000 Solution Spray; multiple nozzles (8, 12 or 16) w/ separate shut-off valves Volume Marker and Overflow Protection; for Solution Reservoir CCX Exhaust Recirculation System; for Salt Fog and Water Humidity steps only - not for use during Freezing/Cooling or Very High Temp 90ºC options...

... threads, a butterfly valve, and a solenoid valve. Additionally, the fermentation tank has Tri-Clamp connections for CO2, a yeast discharge, a clear drain, as well as an insulated, cooled cone with an angle of inclination of 72 degrees. An integrated CIP ball allows for 360° spraying. The working pressure is limited to a maximum of 2.2 bar and is regulated by a pressure relief valve and a vacuum valve. Furthermore, a pressure relief device and a hop dosing chamber for dry hopping are integrated. The connections can be executed as either Tri-Clamp or milk pipe fittings.

... well as titanium alloys. Depending on the requirements, the following cooling/lubrication components can be combined in a most effective way: — Coolant nozzles for wet processing — Micro-spraying device for minimum quantity lubrication — Cooling vortex tube for dry cutting Type:stationary Technology:circular Treated material:for steel,for stainless steel Applications:for general purpose Other characteristics:CNC,with cooling system,high-performance...

...Dry ice directly from the manufacturer. Dry ice is a medium that, due to its extraordinary properties, with a temperature of -78.6°, is increasingly used in the fields of cleaning and cooling. Liquid carbon dioxide is compressed under high pressure into dry ice snow. From this, TE pellets, TE nuggets, or TE discs are produced for a wide range of applications, creating a highly efficient...

... arrangement. Entrained particles from the dry zone are removed in the wet zone. Moisture levels of less than 1 % can be achieved. The residence time of the product is typically between 5 and 15 minutes. The outstanding heat transfer rate for hot solid products enables cooling of large amounts of solids in a compact machine compared to usually used cooling screws and without cooling air.In product...

... enables targeted water distribution on the heat exchanger plates. The construction using a perforated tub has the further advantage that no contamination occurs and the liquid to be cooled is evenly distributed. Made of stainless steel The trickle cooler is made entirely of stainless steel. You can choose between different materials (see data sheet). Low boiling delay Our trickle coolers are characterized by the fact that the boiling delay is low in flooded operation, whereby overheating can be selected in dry expansion operation.

...Flow monitoring Flow monitoring is a procedure that demands a reliable and reproducible surveillance of limit values and flow patterns. Flow sensors detect critical deviations of the flow rate of liquid and gaseous media. Typical areas of application are the monitoring of cooling circuits in welding applications for example, protection against dry running of pumps, as well as the flow monitoring...

...Dry ice pellets are primarily used in dry ice blasting. They are also used for cooling various products during long transport routes. Cost-effective, no disposal costs, low energy consumption Time-saving, no complicated post-treatment required, short cleaning times Gentle on materials, abrasion-free, no damage to surfaces...

... cooled with low operating costs. It should be noted that, for frost protection reasons, the systems must be operated with water/glycol mixtures. Dry coolers can also be used to relieve the operation of cooling tower systems when the outside temperature has reached the required threshold. This significantly saves operating costs.

...THERMOCON has the right cooling element for every temperature range. +15 to +25°C (Ambient) +2 to +8°C (Cold) <-15°C (Frozen) - Alternative to Dry Ice The GDP-compliant shipping of temperature-sensitive products is becoming increasingly important, as is the quality of the cooling elements. To meet the required temperature limits and durations, the right cooling elements must be...

...Components made of polyamide are produced in a dry state (water content < 0.2%) and are therefore dry and brittle after manufacturing.

...Cooling water systems consist of all components necessary to direct heated cooling water to the cooling system and transport the cooled cooling water to the consumer (heat source). This includes, among other things, water treatment technology as well as the cooling system along with dry coolers, chillers, and cooling towers. We offer systems for industrial use across all common industries. Our factory production under optimal conditions, including factory testing, guarantees optimal quality.

...200 ml, 400 ml, 600 ml, 1000 ml, 2000 ml, 3000 ml liquid: orange / yellow, color: natural PE Seal: aluminum composite foil and protective cap. -30C Freeze Elements are designed for the transport and storage of frozen products, such as food or medications, under -30 °C conditions. -30C Freeze Elements contain Delta T's unique freezing liquid, which is non-toxic and replaces dry ice. The elements are leak-proof and reusable.

Maxland is a young family-owned company, founded and managed in 2015 by owner Max Freudenberger, and today consists of a team of 25 dedicated employees. Initially established as a trading company in the home textiles sector, the company quickly expanded both in its location in Grünsfeld, which now covers around 3,000 m2, as well as in product range and distribution channels. To date, the company ...

...The 802 WXP PUMP wet and dry vacuum cleaner features an AISI304 stainless steel liquid tank with a submersible pump, allowing for simultaneous suction and emptying of liquids. BENEFITS • Two powerful AC motors with by-pass cooling • Compact and mobile • PPL filter for chip separation • Drain hose for liquids • Collection tank in AISI304 stainless steel • Accessory kit included...

...This method allows extremely fast workpiece cooling. When it is necessary to pack or stack workpieces immediately, VEN DRY COOL modules can be installed in all Venjakob drying equipment at any time. Perfect surface results are guaranteed by the drying technique of these individual machine line solutions.

...Also used here as a coolant for longer transport routes, usually in insulated containers. Very well suited for generating dry ice fog in special dry ice fog machines. Dry ice nuggets with a thickness of e.g. 9/10/16mm are an ideal coolant for refrigerated shipping, cooling perishable food, sensitive medical and laboratory products, catering cooling for airlines, cooling for temperature-sensitive cargo such as chemicals or medications in all forms, frozen pet food, storage of refrigerated and frozen products and food, fog effects.

...Mixing combination for producing PVC Dry-Blend (Rigid/Flexible PVC) Heating mixer: 2000l Cooling mixer (horizontal): 7500l Output at 8 batches/h: 6500 kg/h...

...Dry ice is -80° cold. Wherever quick and flexible cooling is needed, dry ice is used.

... devices, we also offer complementary control and regulation systems, as well as self-draining and water treatment systems, ensuring that our customers always receive a complete solution. In addition to standard applications, we also cover special cases, such as high-temperature applications and devices for explosion-prone areas. The product groups are divided as follows: - Adiabatic coolers and liquefiers - Dry coolers and dry liquefiers - Cooling towers and evaporative liquefiers H.T.E. liquefiers and coolers are based on series production...

...The applications of dry ice are diverse. Whether for the transport of perishable food items to frozen products and laboratory samples. Dry ice is available in various forms (such as pellets, nuggets, blocks) and sizes, allowing it to be tailored to specific requirements.

...For 40 years, the proven standard for meeting the highest demands for mixing quality, even in challenging applications such as dry blending, compounding, coating, etc. Product advantages: • Excellent mixing quality and outstanding cooling performance • Maximum productivity through process-optimized design and the use of energy-efficient components • Process-oriented system solutions based on a...

...The special feature of the Metzner CCM 4: the circular cutting machine handles both wet and dry cutting. Depending on the type of cut, the CCM 4 is equipped with a water-cooling lubrication system or micro-knife moistening and preparation for suction. The standard model comes with an integrated discharge conveyor (800 mm length); application range both in-line and off-line. For tubes with suitable material properties the CCM 4 Gasket offers the possibility to cut flat gaskets with the circular knife. Suitable for tubes with max. 30 or 50 mm diameter and a tube length of 1 mm to 1000 m.

...-heated dryers. When sealing these media, there is a risk of dry running at the seal, which can lead to reduced operational safety and service life. This is successfully prevented by the internationally patented system of the DC series. Rotary joints of the DC series are suitable for: Hot water (Series DC up to 250 °C, Series DCL up to 180 °C) Steam (Series DC)...

...soldering, welding, and flocking. Dimensions (Table Housing): 562 mm x 211 mm x 420 mm (LxHxP) Dimensions (19" Housing): 420 mm x 133 mm x 500 mm (LxHxP) Plasma Generator (dimensions): max ∅ 32 mm; L 270 mm; weight: approx. 0.6 kg; cable length: 3 m Treatment Width: 8 - 10 mm Generators: Frequency: 20 kHz, Power: 300 W Process and Cooling Gas: dry, oil-free compressed air; inlet pressure: 5.5 - 8 bars gas consumption: approx. 2 m³/h Power Supply: 230 V / 50 - 60 Hz Control Systems: manual, semi-automatic...