compressed air measurement Germany

...The key to success in optimizing compressed air is data. The METPOINT® measurement range includes sensors and data loggers for monitoring and visualizing data, ensuring the actual quality of compressed air is controlled and identifying hidden cost factors. Our measuring instruments can also be used as an extension of a system and for the early detection of malfunctions. Through our sensors, it...

...Manometers and thermometers are suitable for various applications in pressure and temperature measurement. We offer solutions for both gaseous and liquid measuring substances. The range includes capsule, diaphragm, or bourdon tube manometers and measuring devices in various materials, from standard models to stainless steel versions for use in corrosive environments, as well as electronic measuring technology.

... impacts. The measurement output is digital via an I²C interface, with the address being customer-specific. Thanks to the bus capability of the interface, combining multiple sensors within a system is easily achievable. Measurement range:: 0...80% rH, 80 - 100% rH (short-term); -40..+100°C Accuracy:: +/- 1.8% rH in the range of 10..80% rH; +/- 0.2% rH in the range of 0..10% rH; +/- 0.2° C in the range of 0..60°C Operating pressure:: max. 150 bar...

...Stationary and mobile consumption measurement in compressed air and gases, laminar flow measurement, measurement of burner supply air and leakage flows. The measurement principle is based on the heat transfer from an electrically heated body to the surrounding medium. Thermal flow sensors primarily measure the standard flow velocity Nv. From this, the standard volume flow and mass flow can be...

...Document your compressed air station with: Compressed air consumption chart Pressure diagram Compressor running times for: LOAD and IDLE Overall chart Energy table The weekly chart Provides an overview of compressed air consumption for each day. Each individual day can be selected with a mouse click. The calculation table shows: Load and idle times Kilowatt hours generated cubic meters Costs in every currency Compressed air costs € /m³...

... a PNP contact and a rotatable display module with 4-digit LED display for representing the differential pressure. Optional up to 2 freely configurable contacts are available. Features: — nominal pressure: 0 ... 6 mbar up to 0 ... 1000 mbar — accuracy: 0.35 % FSO — aluminium housing — rotatable and configurable display module — 4-digit LED display — suited for non-aggressive gases and compressed air Optional Features: — 1 / 2 PNP contacts — customer specific versions...

...Filter regulator Temperature range: -10° to +60° C Category Compressed-air technology / Compressed air preparation / Filter regulator Product number supplier 301804337 Adj.-range bar:1,5 - 12 Flow rate l/min:11500 Inner thread:G 1"-11 Measurement connection thread:G 1/4"-19 Series:3 Zollnr:84811005 Weight:1 kg Content:1 STK Barcode:301804337 Price Unit:1 Packaging Unit:1 quantity min:1 VAT key:19.00 %...

...Testing System Width: 810 mm Depth: 1,000 mm Height: 1,920 - 2,700 mm Power Supply: 230 V/50 Hz/10 A Compressed Air: 6 - 8 bar (only necessary with Option Hacker) Space for at least 4 cameras Side exchangeable plate Hood opens upwards Easy access for installation and replacement of the exchangeable plate Control panel pivotable Belt drive pivotable...

... compressed air With individually tailored nozzle cross-sections and rotational speeds. Angle of the cleaning nozzles infinitely adjustable Air connection: G3/8" Height 60mm, Diameter: Working width (selectable) + 20.5mm...

... can be used in many fields of industry, which is appreciated. Examples include: - Introducing force measurements on longitudinal and transverse connections - Compression force measurements on roller and drilling applications - Spring tension measurements on automotive shock absorbers - Determining contact pressure in push rods - Compression force measurements on compressed air knee-lever presses Type: Compression Structure: Button Other features: Compact, made of stainless steel Additional features: Miniature, for strain gauge bridge...

... Accuracy: 3+3ML/1,000 µm (p-p) Maximum resolution: 3+3ML/1,000 µm (p-p) Resolution: 5 nm Maximum response speed: 200 m/min. Protection class: IP67 without compressed air Interface: Siemens DriveCliQ, Fanuc, Mitsubishi Thermal expansion similar to steel Ease of installation Measurement length: 90 mm - 3,740 mm Accuracy: 3+3L/1,000 µm (p-p) Resolution: 5 nm Maximum response speed: 200 m/min Interface: Siemens DRIVE-CLiQ, Fanuc, Mitsubishi...

... * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌...

... is done using a compressed air pulse via solenoid valves. This method of cleaning is very economical, as it is demand-dependent based on differential pressure measurement. The installation and removal of the filter bags are carried out without tools from a mounting platform. Systems that operate in frost-prone areas are equipped with valve heating and an additional cover for the solenoid valves. The required piping layout is designed individually. Hellmich exclusively uses branded components for electronic or electrical assemblies...

... precision of down to one micrometre per millimetre of strip thickness, they meet the demands of modern rolling mills. Contact gauges adapt to the strip passage and follow any waviness of the material. Material to be measured:Metal strip Maximal strip temperature:120 °C (up to 200 °C with reduced accuracy) Measurement resolution:0.1 µm Sampling rate:1 kHz Averaging time Ti:1 – 2,000 ms Protection class:Gauge head: IP64; pneumatic cabinet: IP55; control cabinet: IP55 Compressed air supply:Pressure: min. 5 bar, consumption: max. 7 m³/h...

... humidity not only by utilising ambient air and the built-in heatable water container, but also via an external gas supply with compressed air, nitrogen, and argon. Variable flow rates between 70 and 3500 ml per minute are possible. The integrated pressure regulator is specially calibrated for nitrogen and argon. ...

...The flow tester CETATEST 915 is used for flow testing with compressed air. It includes a measuring system consisting of laminar flow element (LFE) and differential pressure sensor In the direct test method the air, provided by the internal pressure regulator, flows through the measuring section before it enters the test part.In the indirect method, the measuring section is located in the outlet...

...The robust BCP-CH4 methane sensor is based on infrared gas measurement techique and is available in 2 different wavelengths. Minimum flow is not needed and it can be integrated directly into the gas pipe. A gas cooling is no longer required. Monthly adjustment can be done with fresh air. The sensor is longterm stable and IP65 accredited. The production of methane in biogas plants (methane...

...The VTX2 vortex meter is used for flow and volumetric measurements of conductive and non-conductive fluids, gases and vapours in all industrial branches. Applications include volumetric measurements for balancing (compressed air systems, heat carriers, vapours, chemical products, for example), process control and high throughput applications. Technical specifications • DN 15 - 300 (higher on...

... of low dew points even at high ambient temperatures, it covers the entire measurement range from -60 to +60 °C dew point. This makes the hygrometer system ideal for use in industrial drying applications, such as in compressed air and plastic manufacturing.

...Directly controlled, compact pressure reducing valve with internal measurement for steam and compressed air. The setting of the reduced pressure setpoint is done via a spring, which can be adjusted over a wide setpoint range and, if necessary, can be easily replaced with a spring from other setpoint ranges. Self-media controlled, no external energy required. Suitable for gases / steam / water / nitrogen, made of steel / stainless steel / lined with PFA.

... by the set switching point. Additionally, the optical scale allows for a direct view of the existing differential pressure. This pressure switch is used, for example, for simple monitoring of valve functions, oil filters, and oil pumps, as well as system components in compressed air systems, but it also has a high electrical performance capability to directly switch consumers. Medium: Air, motor oil, hydraulic oil, kerosene, hydrocarbons...

... international standards. Due to its mode of operation, the device can be operated under typical laboratory climate conditions. Only distilled water, oil-free compressed air (10 bar), and a supply voltage between 90...230V AC are required as operating materials. The operation of the HUMOR 20 is based on the fundamental two-pressure method and is thus similar to the devices used in national metrology institutes for humidity calibration.

...The standard machine ECO iSONIC combines advanced ultrasonic components with high-quality machine engineering and current control solutions. Applications: Ultrasonic welding, cutting, punching, -riveting, and embossing of thermoplastics Areas of application across all industries Pneumatic features of ECO iSONIC: Compressed air preparation with automatic condensate separator and analog pressure...

...STAUFF Clamps for Hose and Pipe Mounting STAUFF clamps for pipe and hose mounting for industrial, mobile, and marine hydraulics, industrial piping construction, mining, power plant and reactor construction, compressed air technology, measurement and control technology.

...URYU and AcraDyne Controls for Pulse Tools - Control of all tools with measurement sensors - Touch screen or LED display - Built-in compressed air control - Optional fieldbus interfaces - Torque control and angle monitoring - External communication protocols - Barcode connection - Data backup - Ethernet interface and external I/Os - Up to 256 adjustable parameters - Programming via jobs - Optical evaluations...

...Energy optimization in compressed air systems: from generation, treatment, and storage to distribution and end consumption. Everything from a single source. Compressed air consumption measurement, leak detection, training, and presentations. In times of climate change, it's time to check and improve the neglected compressed air system.

... project development, all the way to the installation and maintenance of your compressed air system. Of course, you can also take advantage of individual services such as our rental and leasing offers, repairs of existing systems, pipeline installations, or an energy efficiency measurement with suitable optimization. Just contact our personal representatives. We look forward to your order.

...Buy professional tools and machines online at competitive prices. We are your experts for metal and woodworking machines! Since 1999, we have been your competent wholesale dealer from Büren in the Paderborn district (OWL / NRW) for high-quality machine tools, tools, and workshop supplies in the fields of metalworking, woodworking, compressed air technology, welding technology, and measurement...

... equipped with floor coatings to ensure that dirt can be removed safely, easily, and without residue. To minimize the water consumption of our surface treatment system, a circulation system with a centrifuge for solid separation is used. The compressed air system is also designed to be environmentally friendly with an oil-water separator and consumption-dependent activation, and it is subject to regular inspections.

... - Automation technology - Construction machinery - Office technology - Chemical and pharmaceutical machinery - Cable processing - Printing & printing machines - Compressed air technology - Power tools - Energy technology - Conveyor technology & drive technology - Glass processing - Ceramic processing - Woodworking machines - Automotive workshop equipment - Municipal machines - Plastic processing...