cathode Germany

... perfect for photovoltaic dealers and installers. Thanks to its fast standard 19-inch embedded design module, the battery can be easily installed and maintained. And the best part: The cathode material is made of LiFePO4, which ensures safe performance and a long lifecycle. The high-voltage battery is very reliable and safe. It has a low self-discharge rate and can be stored on a shelf for up to 6 months without charging, without affecting the memory effect. Product Number: BOS-GM5.1 Manufacturer: Deye EAN: 4262434550537 Stock: 3 Dimensions (mm): 440 x 570 x 133...

... Identification gauge:85, referenced to supply common Pirani-only mode:0 (low) Combined Pirani / cold cathode mode:15 … 30 (high) LED:high voltage on Electrical connection:FCC 68 appliance connector, 8 poles, female Sensor cable:8 poles plus shielding Cable length:≤50 (8 x 0.14 mm 2) Operating voltage:≤3.3 Operating current:≤500 Materials exposed to vacuum:stainless steel, Al 2O 3, FPM75, Mo, Ni, Au, W Internal volume:≈20 DN 25 ISO-KF:≈700 DN 40 ISO-KF:≈720 DN 40 CF-F:≈980 Protection category:IP 40 CE conformity:EN 61000-6-2, EN 61000-6-3, EN 61010-1...

...The cathode S002Y is used for cutting steel/sheet metal using plasma technology. The cathode S002Y is made of copper or silver and features a hafnium core at the tip. The S002Y is used in the PerCut 160/170 plasma torch by Kjellberg® and is suitable for power levels up to 160 amperes.

... control current of 10mA over a fiber optic cable up to 25 meters long. - The gate current is tapped off at the cathode of the thyristor via an integrated current regulation of 2.5A. - No additional power supply is required for the gate driver circuit.

...In this cell type, a granulate of electrolyte graphite is used as the cathode. Due to the very large surface area, the current yields remain economically viable even when operating at the threshold limits. The applications of electrolysis systems in aqueous solutions are very diverse. By appropriately selecting the electrodes, a variety of oxidation and reduction reactions can be carried out. The...

...In galvanic zinc plating, the workpieces are immersed in a zinc electrolyte. The workpiece to be galvanized is hung as the cathode in the solution. A highly pure zinc electrode is used as the anode. In galvanic zinc plating, the zinc deposition is proportional to the strength and duration of the current flow, resulting in a layer thickness distribution across the entire workpiece, depending on the geometry of the workpiece.

...Optical features Indicator type standard Electrical features DC current 20 mA Pin assignment Long pin = anode, short pin = cathode Mechanical features Lens typ Flat Lens size 5 mm Bezel typ Superflat bezel Screw thread size M8 Bezel material Metal Connector type Leads of LEDs Number of Connectors 2 IP Code IP40 Max. panel thickness 10 mm Thermal features Operating temperature -20...+60 °C Storage temperature -25...+80 °C...

...With the JEVAmet® VCU vacuum controller, we can offer you a versatile control and display device developed by JEVATEC GmbH, available in single, dual, or triple channel configurations. JEVAmet® VCU-A0 Single-channel control and display device for a wide-range vacuum meter Pirani/Hot Cathode ATMION® Easily readable 6-digit LED display (green) and status indicators for each channel Display and...

...In sinker erosion, electrodes made of copper or graphite are used, which penetrate into the workpiece through spark formation, thereby creating a negative mold. For this process, a medium (dielectric) is required. The dielectric is ionized by the discharge. The positively charged ions strike the workpiece (the cathode), causing only the outer layer of the material to reach such high temperatures...

... painted is connected as the anode, while in cathodic dip painting (CDP) it forms the cathode. When current flows, the paint dispersion, which contains the ionically stabilised paint particles, coagulates in the acidic boundary layer (ADP) or alkaline boundary layer (CDP) and forms a paint film, which adheres well and is hard and resistant to corrosion after hardening. Advantages:...

...Anodes for electroplating, made from cathode cuttings. Delivery Forms We supply electrolytic copper anode material in all dimensions as follows: plates in required dimensions up to a maximum length of 970 mm with a thickness of approximately 8-10 mm. Processing: The plate anodes are pre-assembled by us and can be customized with holes according to your specifications. Application Area: for cyanide copper baths Packaging: on Euro pallets, wrapped with corrugated cardboard and steel banding, max. 1,000 kg per pallet.

... expensive (cobalt is used), has poor safety, average cycle life, and poor material stability. It is primarily used as a cathode material in the production of lithium-ion batteries for mobile phones, notebooks, and other portable electronic devices. Currently, the voltage of lithium cobalt oxide has reached 4.35–4.45 V.

...The nitriding hardening in vacuum using ion bombardment in the plasma of a modified gas discharge is a process for surface treatment of workpieces made of, for example, iron, steel, or cast iron. In a retort, a direct current is applied between the workpiece surface and the retort wall, with the workpieces primarily configured as the cathode and the retort wall as the anode. The atmospheric pressure is evacuated, and at a constant low-pressure range, the gas discharge is initiated in a reactive treatment gas by applying a base voltage.

... for xenon filled short arc lamps Designed for xenon short arc lamps rated up to 1000 W / 66 A Output power customer selectable by control voltage 0 – 5 V Capable to drive lamp voltage ranges from 15 – 29 V length x width x height (mm) 220 x 132 x 141, 2.660 kg PSU boards inside IEC(UL) 60601 approved and HAL T tested Input voltage range from 90V AC to 264V AC, power factor corrected line input μP controlled, digital power management with high output stability over lamp lifetime Output short circuit protected and “Arc to Ground” protected Operation with cathode or anode to ground/PE...

hpulcas GmbH, located at the foot of the Ore Mountains, has invented and implemented a new process for the production of high-purity nickel. The new material quality meets and exceeds the requirements for Ni 270. The key to the process lies in the use of high-purity cathode sheets instead of nickel powder. The high purity level results in special and reproducible properties, which are utilized...