brass alloys Germany

...In applications with corrosive environments or when enhanced heat conductivity is required, our copper-brass round tubes are available in a variety of sizes and gauges, including an inventory of common profiles in long lengths for immediate delivery. Or they can be customized for your application. • A wide array of copper and brass alloys available, from 65/35 to 85/15 • High-strength materials available for high-pressure applications • Internally scarfed round tube • Straight lengths or coil(s) ...

...The VA-L series aluminum circular saws set a new performance standard in aluminum cutting with their design. Servo motor axes and a Harmonic Drive gearbox ensure powerful and process-safe operation for aluminum alloys as well as copper and brass alloys. Due to the technical equipment and the associated cutting performance, the saw results can meet surface requirements of Rz < 8 µm and cutting...

...Very early on, we understood ourselves not only as a manufacturer of highly wear-resistant bronze/special brass alloys but also as a partner in solving tribological problems. This has led us to today being able to select and offer over 14 different special bronze-brass alloys that are best suited to address your specific tribological (sliding technology) issues.

...{"Single drive":"","Speed":"max. 40 m/s","Finished wire":"0.20 – 2.50 mm","Number of pulls":"variable 9 – 23","Infeed wire":"4.50 mm","Material":"Copper, aluminum, brass, alloys","Number of wires":"1","Wire extension":"variable 50% per pull"}...

...Processing and manufacturing using MIG/MAG, TIG, and oxy-fuel welding methods. We work with all ferritic and austenitic materials, as well as non-ferrous metals. Soldering of copper and brass alloys is also part of our service portfolio. Furthermore, we offer methods in the field of wear protection/armoring, such as Corthal 65. This process achieves hardness levels between 63 and 65 HRC. Ideally, the method is applied in two layers and subsequently provides an extremely high wear resistance at temperatures of up to 650° Celsius.

...6-Piece HSS Countersink Set 90° 3-Flute, Straight Fluted, Right-Hand Cutting, Three-Flat Cylindrical Shank DIN 335C Uncoated G106: 6.3 - 8.3 - 10.4 - 12.4 - 16.5 - 20.5 6-Piece HSS Countersink Set 90° 3-Flute, Straight Fluted, Right-Hand Cutting, Three-Flat Cylindrical Shank DIN 335C Uncoated for Steel <1200N/mm², Titanium and Nickel Alloys <1200N/mm², Copper and Brass Alloys G106: 6.3 - 8.3 - 10.4 - 12.4 - 16.5 - 20.5 Coating Variant: Uncoated Order Code: G2364 Shank Design: Polygon Shank Countersink Angle: 90°...

... Materials: • Red brass • Tin bronzes • Aluminum multi-material bronzes • Special brass alloys • Special alloys upon customer request Scope of services: • Centrifugal castings pre-turned or finished according to customer specifications • Heat treatment • Casting with certificate upon request regarding chemical composition and mechanical properties • Quality assurance through 3D measurement technology Dimensions/Delivery sizes: • max. length 500 mm • max. outer diameter 660 mm • min. inner diameter 120 mm Outer diameter: max. 660 mm Inner diameter: min. 120 mm...

...In the investment casting process, we offer cast parts ranging from 0.03 kg to 150 kg. The maximum mold size is 650 x 650 x 650 mm. We cast unalloyed and alloyed steels, as well as a selection of aluminum, bronze, and brass alloys.

...In a macro bearing system, solid lubricants are stored that ensure permanent self-lubrication without additional lubricants. The overlapping arrangement of the storage units guarantees lubrication of the entire bearing surface. Highly wear-resistant copper alloys are used as base materials according to the operating conditions. The combination of copper alloy and solid lubricant storage units...

... iron, copper, brass, silver steel, tool steel, precision steel round bars sanded, quality steel/construction steel Benefits: - Robustness: High strength and durability. - Adaptability: Available in various materials and sizes. - Versatility: Ideal for diverse construction and manufacturing projects. Trust the Eder Group for your round tube needs and benefit from our years of experience and commitment to quality.

... strict tolerances regarding length and strength are adhered to in our compression spring production facility. Special-purpose materials that meet specific requirements can also be integrated into production without any problems. Wire materials: All standard spring steel wires in accordance with EN 10270. Non-ferrous wires made of copper, brass and bronze. Special alloys such as: Hasteloy, CuNi44, NbZr1, TaW2. Other materials on request.

... specializes in the manufacture of precision turned parts, including those made from copper alloys. Copper and copper alloys are ideal for many industrial applications due to their excellent electrical and thermal conductivity, corrosion resistance, and mechanical properties. These materials are particularly important in industries such as electronics, automotive, and heating technology. Modern...

...Main products: Leaded brass, brass, lead-free free-cutting brass, copper, tin bronze, chrome-zirconium copper Product characteristics: High electrical conductivity, thermal conductivity, good strength and hardness, heat resistant, wear resistant and deformation resistant Applications: Aerospace, automobile manufacturing, communication technology, precision processing, household appliances, hardware, welding materials Production capacity: 207,000 tons Honorary titles: China's Top 10 Copper Wire & Rod Company, Zhejiang Famous Brand Product ...

...Materials: all common brass and aluminum alloys Dimensions: on curved and CNC-controlled lathes from bar stock in the diameter range of 3-65 mm chuck machining up to a diameter of 200 Quantities: small, medium, and large series Post-processing: turning, drilling, milling, sawing on appropriate post-processing machines Surfaces: ground surfaces as well as all galvanic and thermal post-treatments by external partners...

...With over 60 years of experience in the production of pipes made from copper and copper alloys, we are one of the leading specialists in the industry!

... Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle...

...Brass in dtandard ans special alloys...

...worm gears and shafts, chain wheels, drive wheels - Bevel gears up to module 6 - Worm shafts up to module 10 - Keyed hub profiles, notch gears - Pinion shafts up to module 10 and 2,500 mm length - Deflection drums - Grooves up to 32 mm width and 250 mm length - Crushing tools for the hard stone and recycling industry - Material usage In addition to classic metal materials, we can also process numerous special materials: - Polyamide, Delrin, laminated press material - Aluminum, bronze, brass - Stainless steel - Cast iron - Special alloys...

... supplier sectors. Our goal is to consistently offer our customers economical conceptual solutions and to meet agreed delivery deadlines. In our facility, we process materials such as aluminum with alloys, plastics like POM, PE, stainless steel, and brass, as well as all common construction and alloy steels. We utilize innovative and proven technologies to create convincing precision products of the highest quality.

...We have hardly any limits when it comes to materials and their combinations. For our customers, we process aluminum, stainless steel, brass, copper, alloys, as well as plastics.

...We supply drawn wires starting from 0.10mm in all common • materials, such as stainless steel, nickel silver, brass, bronze, copper, aluminum, etc. • special materials such as tungsten, titanium, molybdenum, tantalum, etc. as well • heating conductor alloys and • EDM wires...

...Stainless steel bellows, formed from seam-welded thin wall tubing Stainless steel bellows, formed from deep-drawn seamless tubing Bronze and Brass bellows for measuring and controlling applications Hydroformed bellows from exotic alloys as Beryllium copper or Monel400 Customized designs and end forms, also off-the-shelf standard solutions Special coatings on demand ...

...Laser cutting of copper, brass, copper alloys, and non-ferrous metals. Bending and surface treatment available upon request. Precise and repeatable.

...Recycling and Trading of Non-Ferrous Metals such as copper, brass, red brass, bronze, aluminum and its alloys, magnesium, lead, zinc, and tin. As the value of these metals is subject to significant fluctuations on the stock market, we continuously monitor the current prices and take this into account in both purchasing and selling. Through proper processing, they can be reused almost indefinitely as secondary raw materials.

... copper alloys. Araldite 2021-1 is a room temperature curing all-purpose two-component adhesive based on methacrylic ester for the quick bonding of a variety of substrates. Profile: ARALDITE Designation 2021-1 Chemical Basis, Mixing Ratio 2K MMA 1:1 Color light yellow Viscosity (processing) thixotropic Processing time for 100g at 23°C 3min Typical Tg Glass transition temperature approx. 60°C Temp. Resistance (ZSF of 5N/mm²) 100°C Shore hardness Break elongation at 23°C 0.1 E-Modulus in MPa at 23°C EAN:4260534180234 ml:50...

...Corrosion protection and wear protection for almost all metal alloys: steel, stainless steel, gray cast iron, brass, copper, aluminum. Through chemical nickel plating, contour-accurate layers can be produced on precision parts that protect our customers' components from corrosion and wear. In this process, a nickel-phosphorus layer is deposited in a non-electrolytic manner and uniformly. The...

... steel, copper, brass, bronze, and aluminum alloys. Chemical Nickel is used in many industries, including the automotive, aerospace, mechanical engineering, and electronics sectors. In the automotive industry, it protects transmission parts and engine components, while in aerospace, it preserves sensitive parts from extreme conditions. In mechanical engineering, it protects heavily stressed...

...We supply graphite molds for non-ferrous metals and precious metals. Non-Ferrous Metals For the production of bronze, brass, nickel silver, and other copper alloys, we produce: - Strip molds - Bolt molds - Wire molds Precious Metals For the continuous casting of precious metals (e.g., jewelry gold, dental gold, silver), we supply: - Graphite molds for - Strip - Wire - Tube - Crucibles - Lids...

...Zinc-containing bronze alloys, such as red brass, are made from the metals copper and zinc, and may also contain tin, lead, and nickel. The color spectrum ranges from gold-red (high copper content) to a light yellow (high zinc content). The common alloys have a maximum zinc content of 45 percent and are considered particularly resistant to cavitation and wear. Their excellent emergency running and sliding properties also make red brass frequently used in hydraulic systems – for example, in sliding bearings, shells, bushings, or gears.

...We manufacture all tool and fixture parts with the highest precision in the micrometer range on our modern machine park. Processing of all electrically conductive materials such as steel, copper, brass, titanium, aluminum, … Carbide parts in all variations Active components for tool making and mold making Precision engineering special parts Prototype manufacturing Processing of special alloys...