room with air conditioning Germany

... associated air exchange, relative humidity, heat, and odors in the production hall are reduced. Alternatively, the cleaned exhaust air can be fed into a room air conditioning system (RLT system) with heat recovery. A heat exchanger can effectively recover the heat contained in the exhaust air stream, thereby preheating the outside air. Room air conditioning systems also enable the conditioning of the hall air. AFS central systems should always be viewed as a holistic approach.

...The Defrost Damper (DeDa) is designed to close the fan of an evaporator or air cooler to accelerate the defrosting process. Made from NLW fabric, it ensures adequate coverage of the cooler and features a hydrophobic treatment to prevent ice formation. When the fan of the air cooler is running, the DeDa opens, allowing cooled air to flow freely into the room. The DeDa has only a very low pressure...

...-performance fan generates a significant airflow that captures dust over a wide area and draws it into the filter wall. There, it is filtered, and the clean air is returned to the workspace from above. GRINDBOX MOBIL can be freely positioned in the room, is mobile, and can be easily relocated later without the need for ductwork. Thanks to automatic filter cleaning, full extraction power is always available, even during continuous operation. Available in working widths of 2,000 - 3,000 mm.

...Special climate cabinets and chilled water units for air conditioning switch rooms in the paper industry. Utilization of well water for compressor-less air conditioning. Standard manufacturer Siemens S7...

...Innovative plastic profiles make it possible to improve the thermal insulation and efficiency of devices for air conditioning technology. The insulating plastic in housings thermally separates the functional components from the outside world. The goal is to prevent thermal bridges. To achieve this, complex designs for the housings are developed. These typically consist of metallic components that...

... its own redundancy control) - Measurement room air conditioning - Laboratory air conditioning - Precision air conditioning with humidity control - Processing room air conditioning - Cooling supply for central ventilation systems - Draft-free air distribution for all mentioned areas, e.g., using textile air distribution systems - Controlled humidification and dehumidification in all mentioned areas as required - Comfort air conditioning for living spaces...

...The Gowoll garden dome is made of recycled and recyclable polycarbonate, which was specially developed for our Gowoll garden dome. The rings are made of light and rust-proof aluminum and the screws are made of stainless steel and are therefore also rust-proof. The special honeycomb module allows you to easily install air conditioning or even a fireplace, while electric heating options and a...

... intrusion of insects and dust from outside is noticeably reduced. The higher temperature stability in the room achieved by using air-gate® results in measurable energy savings. - Proven reduction in heating and air conditioning costs - Comfort effect for customers and employees - Significantly less heat loss in winter - Significantly less heat entry in summer - Less dust, leaves, and insects in the room - Easy installation, very suitable for retrofitting - Low self-energy consumption - Delivered ready to plug in...

...Compressed Air Atomizing Nozzles for Room Air Humidification...

... the ventilation and exhaust of fans. - Application in modern office communication, e.g., as a filter element for PCs. - Filter elements for air conditioning systems in residential and commercial settings. Back to the manufacturing areas...

...Dehumidifiers, Air Dehumidifiers 230 V, 245 W, 340 W, and 460 W Our affordable solution for your moisture problem. Suitable for room sizes up to 75 m³. The dehumidifiers are designed for operating temperatures from +5 to +35 °C. R13A is used as the refrigerant. A hose can be attached to all models for water drainage – for example, a 1/2 inch garden hose – an adapter is included.

... membranes, approximately 270 hours of use, each membrane can treat up to 280 m³ of air. Maximum performance up to approximately 1,500 m³ of room air Dimensions: H = 35 cm; W = 20 cm, D = 43 cm Sturdy aluminum housing, 2" connections, powerful blower Treatment volume: 1,500 m³ of room air Dimensions: H = 35 cm; W = 20 cm, D = 43 cm...

... air conditioning systems. Other applications include compressors, cars, cooling machines, room climate control, climate ventilation, control cabinets, tanning beds, and much more. High-quality filter foam. Product • Filter foam PPI 20/15 • Dimensions 1,300 x 2,000 x 15 mm • Color black • Thickness 15 mm • Pore size PPI 20 (20 pores per inch) • 1 piece of filter foam PPI 20 This filter foam should not be used in damp or wet areas. 820: 1 plate €42.85...

... is that it is not possible to set a homogeneous temperature and humidity distribution in the cube-shaped room. Based on test engineering concepts in the automotive industry, EP-E developed a concept in which the air flows in a closed loop (loop design). The HPT heat pump test stand is a closed-loop test stand for functional testing of air-to-water heat pumps according to DIN EN 14511. The...

...We offer extraction filter devices for recirculation operation, exhaust installations for discharging air outdoors, and our stand ashtray system for the planning and technical equipment of smoking rooms.

...The AirQlean Low™ 115 / 202 stand-alone unit is suitable for all types of indoor air purification, such as offices, smoking rooms, and other public environments with high cleanliness requirements. The air flows through the particle filter and is returned to the room, cleaned even of the smallest particles. A strategically placed AirQlean Low ensures optimal air filtration and significantly...

...Modular mixed air system for clean rooms and other hygiene areas for direct installation in the ceiling of the room. Compact design with two-stage filtration and cooling capacity of up to 5 kW per unit.

... reputable brands and manufacturers with whom we work closely. We provide all the electrical equipment for your building from a single source: power supply, power distribution, lighting systems. The classic measurement, control, and regulation technology for heating, ventilation, and air conditioning, room automation, building management systems, BMS, and energy management systems.

...Suitable for sterilizers in hospitals, clean room humidifiers, air conditioning systems, process steam generators in the pharmaceutical, chemical, and food industries, etc. Design according to EN 285, type-tested, suitable for continuous and discontinuous operation, completely made of material 1.4571 on the pure steam side. The device is fully equipped with all necessary connections for complete pure steam and heating steam regulation, which we can gladly supply to you, along with the insulation, as needed.

...Room Hygro-Thermostat Type DUO1060 Humidity range: 30...100 %rH Temperature range: 10...60°C The DUO serves as a two-point controller for regulating relative humidity and temperature in air conditioning systems and climate cabinets.

...Room controller with pre-configured control and regulation program, which can be extensively parameterized via network communication and adapted to individual needs. Functionality is also guaranteed independently without bus connection.

... residential buildings, as well as hospitals and schools. In the climate product segment, we offer systems for regulating humidity, ventilation, and air conditioning with sicCare. SicCare is based on our TouchLBM devices and ensures a better indoor climate. The central goal is to maintain a specified humidity level. The gradual, adjusted regulation is particularly gentle on the building structure...

Hygiene; Air Conditioning; Air Conditioning (Refrigeration Systems); Air Conditioning (Air Handling Systems); Air Conditioning for Hospitals...

Rox-Klimatechnik GmbH is a manufacturer of room and process air technology devices and components, partnering with planners, system builders, and system operators.

BOGA GmbH is the manufacturer of AIRWIN ultrasonic humidification systems. Water treatment systems and the necessary accessories are also part of the delivery program. Ultrasonic humidifiers condition the air with moisture. This applies to direct room humidification, duct humidification, product technical humidification, fresh goods humidification, humidors, and other applications. The FUNA...

ALPHA IONSTATEX GMBH is a specialist in: -Cleanroom technology -Air ionization -Room air technology -Climate technology ALPHA IONSTATEX offers cleanroom solutions for the industry, such as: -Cleanroom systems -Injection molding machines -Cleanroom modules -Ionization modules...

Whether in industry or in the laboratory, in hospitals or in the office: Dust retention and air purification are essential almost everywhere, achieved through appropriate ventilation and air conditioning systems, as well as dust extraction and filtration systems. This is a task that Schulz Lufttechnik GmbH has successfully mastered for over 50 years. Schulz Lufttechnik GmbH is the modern system...

...ONI-Wärmetrafo GmbH specializes in energy-saving technology. ONI offers, among other things, cooling/refrigeration systems, heat recovery systems, climate/ventilation systems, cleanroom technology, temperature control systems, water treatment, and compressed air supply. ONI products are used in a variety of industries, such as the plastics industry, metal processing, metalworking and finishing, food industry, medical technology, chemical industry, and automotive suppliers.

... technology systems. In our in-house laboratories, we have modern measuring equipment available, with which we can measure and analyze the flow and acoustic properties of our fans and packaged air conditioning units. Our chamber test stands for recording performance characteristics have been tested and certified by TÜV Süd according to the European standard DIN EN 5801. This has confirmed the reliability and accuracy of Rosenberg's testing facilities, and thus the precision of the performance data of the products, by an independent body.

The company history of Metzger Kälte-Klimatechnik GmbH begins in 1980. Heinz Metzger plans, installs, and sells the first air conditioning systems in a garage in Karlsruhe-Grötzingen. The quality of the systems brings the young company quick success, and by 1982, a dedicated company building is constructed and occupied in the Karlsruhe-Grötzingen industrial area. Capacities and areas of activity...