Results for

Scales - Manufacturer Producer - Germany

41 Companies

490 Products

Product recommendations

DIGITAL SCALE WITH BREWING PROFILE

Turkey

Turkey

Germany

Poland

See more products

FORM + TEST SEIDNER & CO. GMBH

Germany

For more than 55 years, we have been developing and producing testing machines in the Upper Swabian town of Riedlingen. One of our strengths is the design and production of high-quality special test machines according to individual customer specifications. From the smallest machine with an output of just a few newtons to 10, 000 kN pressure test machines weighing over thirty tonnes, our team of experienced engineers and technicians is able to realise the most demanding designs themselves. Due to our close contact with the leading centres and universities, we are always up to date when it comes to testing technology. Our membership of the Verband Deutscher Maschinen- und Anlagenbau (VDMA), a specialist community for testing machines, guarantees you forward-looking technologies, outstanding quality and reliable service. An independent department deals with the development and adaptation of electronic assemblies on our test machines. There's a focus here on project planning and development according to customer-specific specifications. Hardware is produced by a subsidiary in Switzerland.

Website
MAGNESCALE EUROPE GMBH

Germany

Magnescale Co., Ltd. is a globally leading manufacturer of high-precision length measuring systems, angle measuring systems and measuring sensors based in Japan. Magnescale was founded as Sony Magnescale in 1969 and has been part of the DMGMORI Group since 2010. MAGNESCALE™, DIGIRULER™, SmartSCALE™ and DIGITAL GAUGE™ are measuring systems with a magnetic operating principle. As a result, they are extremely insensitive to contamination, while providing a high level of precision and reliability. These length and angle measuring systems are therefore typically used for speed and position control in machine tools. Thanks to their robustness, our measuring sensors are mainly used for quality control in assembly and production plants for series production, e.g. in the automotive industry. LASERSCALE™ measuring systems work according to an interferometric laser operating principle, which generates a very high signal quality. This helps to achieve very high resolutions in the single-digit picometer range. These measuring systems are primarily used in semiconductor production and in measuring machines. Outside of Japan, Magnescale Co., Ltd. has sales companies in Germany (Wernau, near Stuttgart) and in the USA (Irvine, California) and is also supported globally by a large network of distributors and retailers.

Website See all products
4CR INTERNATIONAL GMBH

Germany

4CR has set a global benchmark for automotive refinishing since 2004. Across 78 countries and with over 1600 products, we have maintained the same philosophy – to always be available at the right time with the right solution. Four of us founded 4CR close to Hamburg in northern Germany. Today, we are the loyal partner of thousands of automotive painters in over 78 countries and always feel like we're one big family. We have our roots in Germany, where we embraced the values of precision, reliability and pride in our craftsmanship. We offer an impressively comprehensive range of over 1600 products. In 2024, we will be celebrating 20 years on the market, during which we have continuously grown and benefited from your valuable feedback. 4CR's product line for painting and varnishing is the result of our experience combined with your feedback. We would like to thank our partners for this and to warmly welcome you as a new partner of 4CR.

All the products for "scales"

7700 Mixing Cup 2,3 L Box à 100 pcs.

7700 Mixing Cup 1,4 L Box à 200 pcs.

7700 Mixing Cup 0,385 L Box à 200 pcs.

7700 Mixing Cup 0,75 L Box à 200 pcs.

Website See all products
EMMERAM KARG INDUSTRIETECHNIK

Germany

The company EMMERAM KARG INDUSTRIETECHNIK, is a Manufacturer/ Producer, which operates in the Measurement and regulation equipment and instruments - output and flow industry. It also operates in the thermal and hydraulic test instruments, test instruments for paints, varnishes and enamels, test instruments for the electrical and electronics industry, and scales industries. It is based in Krailling, Germany.
ADE SCHNELLWAAGEN- UND AUFSCHNITTMASCHINEN-FABRIK WALTER R. MAYER (GMBH & CO.)

Germany

The company ADE SCHNELLWAAGEN- UND AUFSCHNITTMASCHINEN-FABRIK WALTER R. MAYER (GMBH & CO.), is a Manufacturer/ Producer, which operates in the Weighing and dosing equipment industry. It also operates in the electronic scales for commerce, scales, electronic scales for the kitchen, and professional scales industries. It is based in Hamburg, Germany.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

BWD BIERMANN WAAGEN UND DATENSYSTEME GMBH

Germany

The company BWD BIERMANN WAAGEN UND DATENSYSTEME GMBH, is a Manufacturer/ Producer, which operates in the Weighing and dosing equipment industry. It also operates in the scales industries. It is based in Schwabach, Germany.
MINEBEA INTEC GMBH

Germany

Minebea Intec is a leading manufacturer of industrial weighing and inspection technologies. With its headquarters in Hamburg, Germany, for over 150 years the company has been offering products and services which have become synonymous with innovation, performance and reliability. Their product portfolio includes platform scales, load cells, vessel and silo scales, checkweighers, metal detectors, X-ray inspection systems and user-friendly software solutions. With around 1000 employees worldwide, 19 sites and a network of 200 certified international distribution partners, Minebea Intec is a global player in its industry. Having sold more than 90, 000 inspection systems, 350, 000 industrial scales and indicators, around 1, 000, 000 industrial load cells, and services worldwide, the company can be relied upon by its customers and partners from a wide range of industries. Minebea Intec is part of the MinebeaMitsumi Group, one of the leading suppliers of high-precision production components, such as ball bearings and engines, as well as high-quality electronic components, such as sensors, antennae and IoT solutions. The group, based in Tokyo, has around 87, 000 employees worldwide and reported a consolidated net turnover of JPY 988.424 million for 2020 (approx. EUR 7.61 billion).

All the products for "scales"

Single Point load cell CB17

Digital scale - IF

Bench and floor scales - Puro®

Industrial scale - Signum®

Stainless steel pallet scale - IU

Website See all products
YAMATO SCALE GMBH

Germany

Yamato Scale is an established manufacturer of weighing systems for the food - and non-food industry. Our product range includes: Multihead weighers, Checkweighers, Fully automatic and Semi-automatic weighing systems. With Yamato, you are guaranteed to find an industrial scale for every budget and application. Our scales are suitable for weighing, batching, counting and mixing of various products. Whether you need to weigh and package confectionery, snacks, baked goods, cereals, nuts, frozen foods, fresh produce, meat products or non-food applications such as chemical or pharmaceutical products, we will support you with innovative technology to develop your individual packaging solution together with you. Products: Multihead weighers, multihead scales, automatic multihead equipment, automatic dataweigh, computer combination weighers, industrial weighers, dynamic weighing systems, checkweighers, automatic weight checker, complete packaging solutions, packaging machines, packaging line accessories.

Website
BIZERBA SE & CO. KG

Germany

For generations, the Bizerba name has been closely associated with all things relating to weighing and measuring – not to mention high quality, innovative solutions and a comprehensive range of services. Bizerba offers customers in handicraft, trade, industry and logistics a globally unique portfolio of hardware and software solutions relating to the key parameter of weight. Comprehensive services that include consultation, servicing, labelling, consumables and leasing round off the range of solutions we have to offer. Since 1866, Bizerba has considerably shaped technological developments in the field of weighing technology and now operates in approximately 120 countries. Our customer base ranges from international commercial and industrial enterprises to the retail industry, and we also cater to the bakery and butchery trades. Our Group has over 3900 employees worldwide, has been family-run for five generations and is headquartered in Balingen in the German state of Baden-Württemberg.

All the products for "scales"

RetailPowerScale

RetailIntegratorsKit (RIK)

XC II 800 Pro

XC II 300 Pro

XC II 400 Pro

Website See all products
LUTZ PUMPEN GMBH

Germany

Since the company was founded in 1954 by Karl Lutz and the creation of almost ideal production facilities in Wertheim, this brand has become synonymous with complete systems for the transfer and filling of liquids in recent years. Today, the Lutz Group is made up of highly efficient medium-sized companies, operating in various industries in Germany and abroad. The fusion of selected enterprises made it possible to considerably expand the product range. Today, the Lutz Group of companies employs more than 350 people worldwide.

All the products for "scales"

Double diaphragm pump PVDF 1 1/2" - 5241-350

Double diaphragm pump PP 1 1/2" - 5240-200

Double-diaphragm pump Stainless Steel 1 1/2"

Double diaphragm pump PVDF 2" - 5251-350

Double diaphragm pump 2" metal - 5252-240

Website See all products

FRICKE ABFÜLLTECHNIK GMBH & CO. KG

Germany

Based in Minden, FRICKE Dosing + Filling Systems has a global presence and caters to customers from around the world, providing high-quality dosing and filling systems incl. control software. .

All the products for "scales"

Liquids dispensing system - Concordia II

Semi-automatic filling machine - EFS 42

Liquid dispensing system - CONCORDIA IV

Semi-automatic filling machine - EFS 41

Semi-automatic filling machine - EFS 21

Website See all products
SHENZHEN PROMOSTAR HARDWARE CO.,LTD

Germany

ShenZhen PromoStar Hardware Co., Ltd is a company who specialize in Metal CNC machining parts, CNC turning parts, CNC milling parts, stamping parts, sheet metal parts, welding products for all kinds of industry. The materials we used to worked were stainless steel, aluminium, titanium, brass, copper, carbon steel, POM, PEEK and so on. The headquater of Promostar located at ShenZhen, China with a 2000² meter workplant.Since 2016, Promostar has an office in Meerbusch, Germany. Since 2021 lunched a 3000² meter workplant in Jiangxi China. We can meet all industry demands, such as : Austronautic, Optik, Sensor, Electronic, Automotive, LED lighting, furniture, machinery & equipments, medicial equipments, plastic & moulds lines and so on. We can reach the tolerance within +/-0.002mm. The material we are using can be reached the standard cetifications from ROHS, REACH. Promostar invested a lot on the machines and worker technologies and we have a strong human resources department. All our team have more than 8 years relationship. We work on team. PromoStar is getting a good credit around the world. Please do not hesitate to contact us for more information !

All the products for "scales"

CNC Millng machines

Website See all products

Product recommendations

Spain

Scale & Packing Systems EXTRACTION RATE SCALE

Turkey

Scale Up in Biotechnology and Pharmaceutical Production

Switzerland

Turkey

See more products

BEHN + BATES MASCHINENFABRIK GMBH & CO. KG

Germany

Consider it bagged! Our company, based in the city of Münster in western Germany, has specialised in the manufacture of high-quality bag filling machinery for the food industry. We manufacture manually operated packers, fully automatic bagging lines and ultra-hygienic filling machines for baby food and pharmaceutical products. We also supply palletisers, liquid filling lines and storage systems. With our globally operating sister companies and representatives, we serve customers all around the world. Nowadays – our focus is not only on packaging technology – our PROcheck products target the complete range of process engineering technologies, digital solutions and designing packaging materials, as well as spare parts and maintenance management.

Website See all products
EDDYLAB GMBH

Germany

eddylab GmbH specialises in developing, designing and producing sensors for monitoring geometric dimensions, as well as offering complete system solutions. Its product range comprises high-accuracy contact and non-contact measuring sensors and includes eddy current sensors, inductive sensors (LVDT), laser sensors, draw-wire sensors, digital measuring sensors, rulers, scales, displays and signal converters. eddylab offers standard products with short delivery times for a range of industrial applications in factory and process automation, for test benches and for research and development, all at an attractive price-performance ratio. eddylab products can be configured specifically to customers and perfectly adapted to their requirements. Another of eddylab GmbH's strengths lies in developing application-specific sensor systems. This means that the company is not only able to produce individual pieces, but also to manufacture medium and large series for OEM integration.

Website See all products
SME SONDERMASCHINENBAU ENGELSDORF GMBH

Germany

SME Sondermaschinenbau Engelsdorf GmbH supports you in developing individual and holistic system solutions. We cover the entire process chain: From planning and construction to implementation. Our trademark is coherent machine and plant designs for the automotive, building materials and process industries as well as the consumer goods industry. Performance fields that help automate your processes: Conveying and handling solutions, assembly technology, robot cells for palletising, handling and screwdriving processes. Manufacturing possibilities that make us strong: Sawing, conventional and CNC turning, milling, horizontal drilling, TIG and MAG welding, painting, assembly and electrical installation. Software solutions that support us in the implementation: AutoCAD Inventor® 2018, AutoCAD Inventor® Factory Design, EPLAN Electric P8, Siemens TIA V15, DELECO® ERP system.

Website
AVITEQ VIBRATIONSTECHNIK GMBH

Germany

Since 1939, AViTEQ has provided top-quality reliable solutions for vibration conveyor and process technology for a wide range of industry sectors and has always been ready to help via its global service.

All the products for "scales"

Belt scales - Weighing

Website See all products
SCHNEIDER & GEMSA GMBH

Germany

Schneider & Gemsa offers dedicated and professional solutions for customers from the automotive, industrial, telecommunications, traffic management, medical and electronic equipment sectors. Our manufacturing capabilities range from one-off and assembly-based manufacture to the complete manufacture of terminal devices and complete system solutions. We move and operate complete "business areas" – fully and semi-automatic production lines in affordable locations. Our sites in Germany, Czechia and Moldova enable us to offer cost-optimised solutions and services. Schneider & Gemsa has many decades of expertise in cable assembly, mechanics, mechatronics, electronic equipment, sensors and actuators. Since the company's foundation, we have produced several million electric adjusting motors, mechanical and electrotechnical assemblies and end devices. Our cable assembly produces strands as well as data, sensor and control cables, wiring harnesses and control cabinets with innovative technologies using the latest machinery and tools. Our own equipment workshop manufactures individual assembly, manufacture and inspection equipment. We consider quality, environmental protection and the conservation of resources to be essential aspects of our activities. Our company complies with the standards DIN EN ISO 9001: 2015, IATF 16949: 2016 (automotive) and DIN EN ISO 14001: 2009 (environment) at all sites.

Website
TVI GMBH

Germany

Whether steaks, cutlets, roulades, chops, grill sticks or kebabs – customers throughout the world portion their meat efficiently, economically, hygienically and reliably with our powerful portioning solutions. In both the retail trade and catering. Day after day, and without compromise. We have specialised in meat portioning since our company was founded in 2004 – and we have become the leading manufacturer of meat portioning machines and complete portioning lines. Our wide product range comprises efficient and needs-based solutions for tempering, freezing, pressing, portioning and automating, as well as for winding grill sticks and producing kebab skewers. These high-tech TVI systems range from tempering of the initial product through to virtually every type of portioning, and from manual or automatic loading into trays with subsequent weight checking right up to transferring the finished portions to the packaging machine.

Website
SIGG STRAHLTECHNIK GMBH

Germany

SIGG Strahltechnik GmbH, based in Jestetten in Germany, is a specialist in the production of blasting technology systems and superfinishing vibrators. In addition to the mass-produced standard equipment, the company also manufactures customised systems of any size and shape. Customers who do not have their own blasting technology system or superfinishing vibrators can commission our in-house blasting facility to produce parts. SIGG Strahltechnik supplies the most common blasting agents in a wide range of pack sizes to suit the system, starting at 25 kilograms. We strive to provide the very best quality for all systems and blasting agents. With a high degree of vertical integration and extensive expertise in all aspects of blasting technology, SIGG Strahltechnik is able to meet even the most demanding customer requirements quickly. The company represents premium quality that carries the "Made in Germany" stamp.

Website
CLIMAIR PLAVA KUNSTSTOFFE GMBH

Germany

ClimAir rain and wind deflectors are fitted to the side doors of vehicles and impress with their subtle elegance. They improve the air quality inside the vehicle and enable the driver and passengers to enjoy a circulation of fresh air, even while it is raining or snowing. During periods of intense sunlight, they prevent uncomfortable heat build-ups inside the vehicle when the windows are opened to only slightly above the lower edge of the wind deflector. ClimAir rain and wind deflectors are fitted to the side doors of vehicles and impress with their subtle elegance. They improve the air quality inside the vehicle and enable the driver and passengers to enjoy a circulation of fresh air, even while it is raining or snowing. During periods of intense sunlight, they prevent uncomfortable heat build-ups inside the vehicle when the windows are opened to only slightly above the lower edge of the wind deflector.

Website

SIKO GMBH

Germany

Today SIKO sums up five decades of experience in length, angle and speed measurement technology. Building upon this core competence, SIKO develops and manufactures groundbreaking products for automation and drive engineering. The highest demands of our industrial and machine engineering customers lead to quality, precision and functionality of our products and services. SIKO is certified according to DIN EN ISO 9001 : 2008. Sustainable resource management is a matter of course for us.

All the products for "scales"

Control knob DK03

Website See all products
L.B. BOHLE MASCHINEN UND VERFAHREN GMBH

Germany

L.B. Bohle Maschinen und Verfahren GmbH is a globally operating mechanical and systems engineer for the pharmaceutical industry. As an independent family company, we are technology leaders on the market. Out head office is in Ennigerloh, Germany. We manufacture only "Made in Germany" and invest disproportionately in the research and development sector. With an export share of 80%, we are represented in more than 40 countries all over the world through those countries' own branches and representatives. The product range includes process and handling technology for pharmaceutical solids production. We manufacture individual and system solutions for the following process steps: - weighing and dosing - wet granulation and dry granulation - container mixing - grinding and sifting - tablet coating - product handling - containment. In addition to systems for traditional batch production, we offer a comprehensive range in the area of continuous manufacturing. In addition, L.B. Bohle develops laboratory apparatus for the research and development sectors.

Website
WALTER UHL TECHNISCHE MIKROSKOPIE GMBH & CO. KG

Germany

Founded in 1943 by Oskar Uhl, Walter Uhl technische Mikroskopie GmbH & Co. KG has been synonymous with top quality and precision in the fields of precision engineering and optical metrology for over 80 years. Based in 35614 Asslar, Germany, our company has established itself through continuous development and expansion as a leading provider worldwide within the industry. We offer a comprehensive range of precision engineering and optical components and devices that are used in numerous sectors, including: Measuring microscopes: portable, video and workshop measuring microscopes, ideal for precise measurement and testing activities. Microhardness testers: devices for testing hardness in accordance with Vickers and Knoop, suitable for loads from 1 g to 2 kg. Positioning systems: linear, cross, rotary and lifting tables as well as tripods and control units for exact positioning requirements. Small devices: pen microscopes, centring microscopes, portable devices and alignment checkers. Custom solutions: individually tailored solutions for special requirements in the field of optical metrology. Our products are characterised by high precision and reliability. We achieve this by incorporating cutting-edge technologies and continuous research and development. With our own construction and software engineering department, we can offer tailor-made and customer-specific custom solutions perfectly adapted to the needs of our customers.

Website See all products
BOSCH INDUSTRIEKESSEL GMBH - INDUSTRIAL BOILERS

Germany

Bosch Industriekessel GmbH, a company of the Bosch Home Comfort Group, , has been developing and manufacturing project-specific heating and process heat systems for more than 150 years. In keeping with its “Invented for life” principle, Bosch Industriekessel creates future-proof energy systems. The steam and hot water boilers increase the energy efficiency in production, buildings and district heating grids – by means of sustainable energy use and the seamless integration of Industry 4.0 applications. CO2-neutral heating and process heat solutions with hydrogen and electrification help pave the way to carbon-neutral heating. Around the world, Bosch Industriekessel customers are offered a universal product portfolio, as well as planning support, project management and after-sales services such as maintenance and 24/7 support – all from one source.

Website See all products
KUBOTA BRABENDER TECHNOLOGIE GMBH

Germany

Kubota Brabender Technologie GmbH Kubota Brabender Technologie GmbH is one of the world's leading manufacturers of gravimetric and volumetric feeders for bulk materials such as granulates, powders, liquids, and fibres in all industrial sectors. The company has over 65 years of expertise in the field of high-precision digital weighing technology and has continuously developed and enhanced its universal and special metering systems, controls, and discharge aids. Their broad product portfolio consists of Loss-in-weight-feeders, weigh-belt feeders, single and twin-screw feeders, vibratory tray feeders, bulk bag discharge aids for silos and bins, and bulk ingredient mass flow meters. In 2022, Kubota Brabender Technologie GmbH became a fully owned subsidiary of the Kubota Corporation of Osaka, Japan. Kubota Brabender Technologie offers its technical and consulting services globally through a worldwide network of subsidiaries and representatives.

All the products for "scales"

Feeder with mass flow meter - Coriolis CDW250

Website See all products
SIEMPELKAMP MASCHINENFABRIK GMBH

Germany

Proven Siempelkamp quality for your production project with almost unlimited possibilities. Siempelkamp Maschinenfabrik GmbH is the right partner when orders in contract manufacturing are to be processed promptly. Comprehensively equipped machinery and well-trained personnel form important foundations for this. We provide our customers with production capacities in the areas of welding, machining and assembly of around 400, 000 hours per year. Machining – from small to large. Deep hole drilling. Welded construction according to individual customer requirements. Complex assemblies.

All the products for "scales"

Load-Cell Scales

Continuous Panel Scale Conti-Scale X Mulitenergy

See all products
BLUESENS GAS SENSOR GMBH

Germany

BlueSens is your specialist for gas analysis, focused on bioprocesses from lab to industrial scales. Founded in 2001 we have more than 15 years of experience and are market leader in gas analysis solutions. Our philosophy is to measure it where it happens when it happens. With our high quality sensors we serve our customers from all over the world working in pharma, food, feed, bioproduction as well as biogas sector. BlueSens´ products work independent from scale and are compatible with most bioreactor types. It´s our objective to offer our customer best quality, an appealing price/performance ratio and best possible service. No matter if you need single process sensors (O2, CO2, CH4, H2, EtOH), combined gas sensors (BlueVary, BlueInOne) or complete systems (eg Yieldmaster) we assist you in finding the right solution for your bioprocess. All sensors are produced in Germany following our strictest quality guidelines. Software and additional equipment as well as production of OEM sensors are rounding off our product portfolio. Do you have questions or try to solve an untypical problem? Contact us we are well known for our excellent customer service. US customers can directly contact our US subsidiary.

All the products for "scales"

Gas Analyzers for shake flasks- BCPreFerm

See all products
WESTMARK GMBH

Germany

In 1956, Hubert Deimel founded the "Hubert Deimel Haushaltwarenfabrik". It manufactured the "famous" potato peelers. The product was a sales hit and formed the basis for the company's successful development. Today, the company is known as Westmark GmbH and has over 2500 items on offer. As a specialist trade partner, Westmark offers a range of practical catering and kitchen aids along with household goods. Our core areas of expertise are manual household aids for peeling, cutting, dividing, preparing food, serving and taking away, boiling down, baking, eating, gifts, baskets and table sets. Most of our revenue comes from items that are MADE IN GERMANY and are manufactured in-house. Production departments include plastic injection moulding and extrusion, aluminium die casting, zinc die casting and metalworking. Production takes place at the headquarters in Lennestadt-Elspe and in Wittelsberg.

All the products for "scales"

Westmark

Westmark

See all products
DR. JOHANNES HEIDENHAIN GMBH

Germany

DR. JOHANNES HEIDENHAIN GmbH develops and manufactures linear and angle encoders, rotary encoders, digital readouts and numerical controls for demanding positioning tasks. HEIDENHAIN products are used primarily in high-precision machine tools as well as in plants for the production and processing of electronic components. With our extensive experience and know-how in the development and manufacture of measuring devices and numerical controls, we create the groundwork for the automation of tomorrow’s plants and production machines. Competence in the area of linear and angular metrology is reflected by a large number of customized solutions for users. These include the measuring and test equipment developed and built for many of the world’s standards laboratories and the angle encoders for various telescopes and satellite receiving antennas. Naturally the standard products also profit from these experiences. The high quality of HEIDENHAIN products depends on special production facilities and measuring equipment. Masters and submasters for scale manufacturing are produced in a clean-room building, conceived especially for this purpose, with special measures for temperature stabilization and vibration insulation. The the machines required for the manufacture and measurement of linear and circular graduations and copying machines are also developed and built by HEIDENHAIN.

All the products for "scales"

Length Gauge - METRO

See all products
HUZAP GMBH

Germany

Hennef is traditionally the centre for companies which manufacture scales. This is why HUZAP Waagen- und Anlagenbau was established in 2002 in Hennef. The delivery portfolio of HUZAP GmbH include a range of products from the packaging technology and plant engineering sectors, as well as mixer feeding systems. Due to economic globalisation, the company structure of HUZAP was set up so that the product range can endure on the international market under competitive conditions – in terms of technology and price. Thanks to the generation of a continuously increasing number of orders, the number of employees has risen to its current count of 44. Since HUZAP was founded, the company has managed to build up a global customer base thanks to the systems supplied, which have impressed with their quality and technology. HUZAP also guarantees an extensive range of services for the scales and systems supplied, including maintenance and the supply of spare parts.