ventilation Germany

... well as at high points with low flow quantities. Type F (fine ventilation): Air escapes through this valve, and collected gases cause it to open once again, including under operating pressure, until the medium continues to flow and close the valve again. Installed at high points which are under hydrostatic pressure even when the pump is shut down due to the height variation involved, and where no coarse ventilation is required. Installed at high points of pressure lines with low flow quantities. Housing:EN-JS1030, 1.0038 Coating:EGD...

For over 50 years, Poll has been providing state-of-the-art technology in the field of chimney construction. During this time, we have developed 15 chimney systems that cover all areas of application. Today, we plan, develop, and install chimney systems for commerce, industry, and residential construction. Our chimney systems are made of high-quality stainless steel. Higher thermal insulation and...

...Optimal ventilation is primarily achieved through counter-battens between the eaves and ridge areas. The space created beneath the roofing material serves several purposes: - Moisture that has penetrated through the roofing can be safely drained, - the safe drainage of dripping condensation from the underside of the roofing material, - ventilation of the covering, - the ventilation space achieved can contribute to summer heat protection.

...We manufacture perforated sheets and cuttings tailored to customer specifications - in single pieces, in small or larger quantities. These are used as privacy screens, balcony railings, railing infills, window protection grilles, stair railings, fence panels, as cladding for machines, as ventilation grilles, etc. The perforated sheets and cuttings are produced according to your dimensions up to...

... tunnel is adjustable via double ventilation flaps, separated from the outside. The transport speed can be continuously adjusted at the control panel. A digital temperature controller and an electronic air volume control allow for setting a constant temperature of up to 250°C in the shrink tunnel. Passage width :450 mm - 1650 mm Passage height :300 mm – 700 mm Shrink hood length:800 mm – 4500 mm Heating power :8.4 kW– 75.6 kW...

... structure that allows for good ventilation and air circulation to maintain the freshness of the vegetables. Some models are equipped with drawstrings or cords to securely close the bag. Features and Benefits: Breathability: The open structure of the raschel bags allows for good ventilation of the vegetables, which helps to extend their shelf life.

... standbag is available in: high transparent, high glossy OPP transparent, glossy CPP (PPCast) LDPE Sizes, material and foil thickness according to your specifications also in big sizes with or without head-strengthening inlay PP executions with stable ultrasonic knurling with or without Eurohole round hole for ventilation (one or several) with our without flap (also angle cut) with or without adhesive glue strip filling from above or below optionally (new) with zipper, filling from above with or without printing up to 10 colours in flexo or gravure printing...

A good climate ensures relaxed work and healthy living! Caltech Gesellschaft für Kälte- und Klimatechnik mbH from Bremen is your competent partner in the field of climate, ventilation, and refrigeration technology. We are the specialists when it comes to planning and creating an optimal system. System Planning We plan complete systems for the areas of * Ventilation * Refrigeration technol...

Do you want to rent or buy an air-cooled chiller? Is it getting too warm in your workshop and you only want to cool it during the summer? Would you like to rent a mobile ice rink in winter? Then you are exactly right with us! Rent a chiller at kW-rent – chillers for every need With us, you can rent, lease, or buy (almost) everything that comes from the segments of mobile cooling, air conditio...

...Electric motors for high speed application (approx. 6.000 up to approx. 30.000min1) need to be designed with special concern for bearings, greasing and ventilation.

...The demand valve is used for the application of 100 vol.% oxygen during manual ventilation with a bag valve mask. Direct ventilation with a face mask is also possible for spontaneously breathing patients. Technical Data: Operating Temperature: -20 to +70°C Required Operating Pressure: 280 to 550 kPa (2.8 to 5.5 bar) Maximum Delivery Capacity: 200 l/min at 20°C and 450 kPa Response Pressure...

... electronics with LEDs. The devices are used wherever safe, robust, and low-maintenance monitoring of flow values is required. This includes, among others, climate technology, monitoring of exhaust systems, and ventilation monitoring.

...lastic and strong adhesive and sealant on polyurethane (PUR) basis. For bondings and sealings on metals, many plastics, ceramic, wood, glass, stone, etc.. Applications: Tank and apparatus construction, Car body, freight container and vehicle construction, Ventilation and air conditioning, Pipeline and fittings construction, Energy and electrical industry, Insulating technology and in many areas...

... example, for use in the food sector, but also for presentation and sales. Ziplock bags with a labeling field are freeze-resistant from a material thickness of 50µ. We offer ziplock bags with a labeling field in different versions (blocked and perforated, with a round hole, with a ventilation hole, in an extra strong design, etc.), sizes and formats. We would be happy to advise you when purchasing...

...Adjustable rubber nozzle for the ventilation industry made of EPDM...

...through textile ventilation ducts (source air hoses), made from flame-retardant fabric. The source air hoses are used for draft-free ventilation, heating, or cooling of spaces in: • Offices • Gastronomy • Production halls • Large kitchens • Laboratories • Warehouses • Sports halls They are manufactured in various designs, e.g., suspensions optionally with snap buttons or carabiners, divisible by zippers. The advantages over metal ducts are: • Draft-free air supply • No condensation on the surface • No noise disturbance • Easy installation • Hassle-free cleaning...

...Ventilation hoods made of stainless steel (1.4301 or 1.4571) DN 100, DN125, DN150, DN200 Supply and exhaust chimney for use in sanitary and shaft systems made of high-alloy material, stainless steel. Available in various sizes and lengths. Inquiries can be sent directly to: markus.simon@smb-jessen.de...

...Electrical air heaters for air or process gas heating in pressureless systems: ·         Ventilation systems, Ex HVAC plants ·         Supply air heaters for machines ·         Heating of process gases ·         Heating of containers or heating chambers ATEX, IECEx, TR-CU and other international certificates...

air control has been in operation for over 35 years and designs, plans, produces, and installs central vacuum systems for various industries and trades. The combination of smoothly functioning teamwork and good project management ensures timely delivery of systems, professional installation, and high customer satisfaction. Last but not least, the careful planning is also responsible for tailoring...

Our strength lies in complete solutions with a system. From expert consulting, planning, and installation to our extensive maintenance and service offerings, our customers always receive a tailored solution from a single source. Our Direct Room Air Humidification fits into any building and enhances our customers' success in every application. Low energy costs, flexible installation options, easy r...

We are prosatech.de We are a young, customer-oriented company from Germany that specializes in the planning and distribution of air conditioning systems, VRF systems, and air purifiers.

Tranter manufactures heat exchangers for its customers at various locations worldwide, providing top-notch on-site customer service. The world's longest heat exchanger plates and the largest product portfolio of advanced plate heat exchangers from Tranter offer proven performance in numerous applications involving liquids, gases, steam, and two-phase flow. Our newly developed welded Shell&Plate ...

Company Since 1982, we have been developing, designing, manufacturing, and installing products in the fields of sound insulation, air technology, as well as painting and drying systems according to the latest state of the art. We create complete solutions for our customers that find application worldwide. Service We are your partner for competent, individual, and cost-optimized solutions for co...

In 2000, BRE-Service GmbH was founded. Initially starting with 7 employees, we conducted safety inspections and UVV inspections, maintenance, and repairs on automatic sliding doors, automatic swing drive systems, and hold-open devices in the Leipzig/Halle metropolitan area. The development and implementation of high-quality yet cost-effective service concepts for inspected doors and gates has bee...

For decades, Fritz Althoff has been a competent and proven partner for high-quality solutions in the -chemical/biochemical, -pharmaceutical, -food and beverage industry, -laboratory/medical technology, -environmental technology, and -development and manufacturing of dialysis couplings. We support you in your phases of conception, planning, and design. During implementation, our high technological ...

HECK Kältetechnik GmbH is a medium-sized, globally active family business that specializes in the custom manufacturing, installation, and support of high-quality refrigeration systems for industrial and climate applications. Our range of services primarily includes air cooling and dehumidification, liquid cooling, air drying, as well as the construction of special machines and chilled water centr...

Full-Service from DFW We present ourselves as a young, open-minded company operating in the field of plastic and plant engineering. Our goal and the mission of DFW is to offer you a comprehensive, complete, and individual problem-solving approach. Customers are provided with complete turnkey systems or system components, as well as solutions for tasks in valve, measurement, control, and regulat...

"Always one idea ahead"...

PURIMA is your specialist for innovative, customized, and environmentally conscious system solutions in industrial parts cleaning. For over 25 years, we have been developing and designing cleaning systems in global collaboration with our customers in the automotive industry, aerospace, rail and transportation technology, as well as the metal and plastics industries. Through innovative cleaning tec...

PKS - Your specialist for pumps, compressors & rotary lobe blowers We are a powerful specialist company with extensive experience in the field of industrial pumps, compressors, and rotary lobe blowers.