plastic models Germany

...In some car models with sunroofs, such as certain high-end sports cars, roller blinds are installed to prevent the occupants from getting too warm during high sun exposure. The sunshade is pulled up and down via a guide rail. If this rail is made of metal, it can produce loud noises. Our plastic guide rail with a plastic inlay offers a flexible and maintenance-free solution. The internally...

... options available. One is the aesthetically pleasing Eclipse design, which features both manual and motorized models with a maximum pressing force of 1000 N. The Basic design, on the other hand, is a high-capacity model with a maximum pressing force of 4000 N. Features: • Very good assembly area/lifting height ratio • Self-locking even at maximum load • Fixing grooves on the outer profile Optional features: • Model with manual drive via a crank handle • Other lifting height lengths available upon request • Up to 32 columns can be moved in a bus system with Quadro control...

...hot rolling mills, rod/wire mills Heat treating & annealing Induction heating Lightbulb and halogen lamp production Glass melting Semiconductor furnaces Cement & lime kilns Refuse burning Carbon graphite production Foundry & welding Rubber & thick plastic Measured temperature range:250 – 3200 °C Ambient temperatures:Up to 65 °C; up to 315 °C (600 °F) with ThermoJacket enclosure Optical...

... integrated lid support. Fastening threads for internal mounting are integrated into the bottom and lid of the enclosure. For additional aesthetic appeal, the screw channels can be supplied with plastic or aluminium covers. Access safeguard with an insert lock is also an option. The enclosure can be attached without having to be opened, meaning your electronics remain protected. Cable glands and other accessories are also available. EN AC-44300 DIN EN 1706:Aluminium...

...The Marathon MM series platform consists of five IR temperature sensor models, each with a measurement wavelength and temperature range appropriate for specific application needs, from low temperature plastic processing to high temperature glass and metals processing. The Marathon MM features Precision Variable Focus that allows fast, easy and accurate adjustment of the focus of measurement...

... damage the image of the bus company among its customers. This makes repairs and touchups necessary. As noncorrosive plating is not always available for older vehicles, TC manufactures side walls made of glass fibrereinforced plastic that are suitable for all such models and makes, and provide an optimal and durable alternative to older metallic plating.

...For cost-effective clothing presentation, we offer several plastic variants. The top hangers are available in various lengths. In addition, we provide a clip hanger with adjustable clips. Almost all models are produced in black, white, and frosted. Our plastic hangers are made from impact-resistant polystyrene and are suitable for long-term use.

...— Available in different models and sizes — Made of pure, high-quality PE — Long lifespan due to high-quality manufacturing — Low breakage rate, very impact-resistant — Sturdy handles — Stackable — Arrow markings for stacking assistance Optional: — Equipped with RFID Transponder (selected versions) — Perforated side walls (20 kg box) — Lid (25 kg & 30 kg boxes) — With or without bottom perforations — Custom colors or printing...

...Show what your products are made of: With transparent demonstration models Because they are becoming increasingly popular, whether in model making – such as functional models – or in exhibition models. We produce unique pieces or series parts for you. From functional teaching aids with milled and graphically coordinated texts to medical technology flaps in conjunction with precise stainless steel components. Opt for stainless steel: High-quality displays with satin finishes & stainless steel components complete the overall appearance.

... marking alignment, marking verification, and code reading. The universal B models: motorized Z-axis, work table, electric lift door; ideally suited for a wide range of applications in direct part marking – including in the automotive industry, aerospace, and medical technology, as well as in metal, tool, and mechanical engineering, and in plastic processing industries.

... (ø12, ø24, ø38, ø53, ø67, and ø97). However, each system must be individually configured regarding drive, heating, and insulation to optimally meet the material requirements and reaction conditions of the specific application. Application possibilities: Suitable for reactive plastic synthesis and physical processing of special polymers, such as the production of plastic-based nanocomposites, the dissolution of polymers in ionic solvents or critical gases, pyrolytic polymer reactions, etc.

...Laboratory Press Polystat 500 S The Polystat laboratory presses are offered as a universal machine for producing flat samples made of plastic and rubber. These machines are successfully used worldwide in development, research, quality assurance, and production monitoring. The press is available in various sizes with square working surfaces of 200 mm as the table press 200T and with square working surfaces of 300, 400, and 500 mm as the floor models 300S, 400S, and 500S.

...Whether as an industrial vacuum cleaner or dust extractor – the diverse models of our DA series deliver top performance thanks to their directly driven three-phase motor. Wherever endurance and power are required, these mobile and thoughtfully designed helpers come into play. AT A GLANCE - Sturdy housing made of fiberglass reinforced plastic - Retrofittable modular system - Sound insulation...

... windings. Some models are available with incorporated Signal Converter providing current or voltage outputs in configuration of 2, 3 or 4 wires. Moreover, to provide protection for all potentiometers from mechanical damage, dusty and damp industrial atmospheres a series of casings with a degree of protection IP 40 to IP 68 is available which can be equipped with gearing and limit switches.

... materials: - including steels 1.4571 and 1.4301, - tool steels, - construction steels, - hardened steels up to 62 HRC, - as well as aluminum, - brass, - POM plastic, - PMMA (Plexiglas), - and other technical plastics. We are particularly specialized in the production of simple and complex individual parts and small series. Programs for simple parts are created directly at the machine. If volume models (STEP, SAT, IGES, or Solidworks) of the parts to be manufactured are available, the programs are created externally using the CAM module from Cimatron E13.

...High-quality and reversible (15-20 times) duplicating material based on agar-agar in a 6kg bucket directly from the manufacturer for model making embedding materials, plaster, and plastic casting techniques. For duplicating models for the production of complete and partial dentures as well as model casting works in combination with phosphate-bonded embedding materials. After melting and subsequent cooling to a processing temperature of 45 ºC, it can be processed continuously.

... cabins. The dimensions of the manual powder coating cabins are specifically tailored to the size of the product to be coated. Depending on customer requirements, they are manufactured with either a jet-pulse filter or a mono cyclone. Filtered cabins require an exhaust connection. For this reason, in areas where connecting to the exhaust is difficult, BOOTHLINE-CY models with an integrated mono cyclone are preferred. With the option for the automatic sieving system, the paint used is returned directly to the spray gun after sieving and can be reused.

... engineering: constructive optimization of existing components - Quality inspection through dimensional control (target/actual comparison, inspection reports) - Assembly of assemblies We are happy to manufacture entire assemblies for you – and just as gladly take care of the assembly afterwards. Ask us about this special service, which includes a comprehensive worry-free package: from the production of plastic finished parts to the coordination of purchased parts and assembly, all the way to functional and quality testing.

... in use. TECHNICAL REQUIREMENTS: Windows ME / 2000 / XP / Vista / Windows 7 / Windows 8 / Windows 10 / MAC OS X 10.x (PC with built-in USB port), USB 1.1 / 2.0 (Connect directly to the PC USB port), at least 3 MB of free hard disk space required. Other models and capacities available upon request! Plastic, Metal, Orange...

... powder-coated. Cantilever chair Frame precision steel tube, plastic gliders. Armrest in fabric and synthetic leather upholstered models in black leather, in leather upholstered models in leather like seat shell. Metal surface powder-coated. Optional Metal surface chrome, felt gliders. Stacking chairs with row connection, optionally with locking and seat number. Stacking Up to a maximum of 6 chairs on the floor and on stacking trolley 6491-000. Up to a maximum of 8 chairs on stacking trolley 6396-000.

... One porcelain toilet with concealed cistern, one porcelain urinal, a hand wash basin, mirror, paper and soap dispensers, skylight, some with integrated sound system External Dimensions Length: 3.4 m (+ 1.45 m drawbar) Width: 2.1 m Height: 2.7 m Permissible total weight: 1300 kg Connections Electricity: 230V Fresh water: GEKA or garden coupling Wastewater: Plastic pipe DIN 100, alternatively wastewater pump Feel free to contact us with any questions!

...Sand casting belongs to the group of casting processes with expendable molds. Sand Casting Sand casting belongs to the group of casting processes with expendable molds. In the model-making workshop we trust, casting models are created from plastic, wood, or aluminum, which are then molded using natural molding sand. After removing the models, a negative mold remains, which is filled with metal...

...Our company plans, manufactures, and installs balcony and entrance canopies based on a variety of already realized models or customized according to customer specifications. These can be aluminum or steel constructions with different fillings, such as plastic or glass.

... care, toy manufacturing, and sex toys. Due to its very liquid nature, it is suitable for duplicating models with very pronounced undercuts. Compatibility extends to all plasters, waxes, polyurethane, and acrylic plastics. Silicone oil, including the brand WACKER, is available from us in different viscosities. Silicone oil application areas: release agent - lubricant - hydraulic oil - antifoaming agent - hydrophobizing agent - liquid dielectric for electrical and electronic equipment - heat transfer oil - care additive - plastic additive - textile and fiber auxiliary agent additive.

...According to our slogan "Your ideas professionally shaped," we support you from the initial concept to the finished product. We have positioned ourselves in the market as a reliable supplier of small plastic parts, capable of quickly and flexibly manufacturing models, spare parts, and small series in suitable quality. In principle, any plastic part can be produced using 3D printers. The parts...

... many other materials available. Everything from a Single Source: One of our strengths lies in the fact that we can carry out wood, metal, and plastic work as well as special techniques entirely in-house.

... technically up to date. All our machines are characterized by reliability and excellent workmanship. The machines delivered so far combine our years of experience in the manufacturing and design of milling machines with practical feedback from our customers in the fields of carpentry, metal and plastic construction, and aerospace, such as Premium Aerotec, among others. The over 10,000 operating...

Our company has been successfully manufacturing models of all kinds for over 40 years. We are one of the largest model workshops in Europe, equipped with various types of plastic, wood, and metal processing capabilities. Additionally, we utilize state-of-the-art CAD and CAM technology to design, construct, and produce the models accordingly. We create models in the fields of shipbuilding...

... production chain – from the idea to the finished 3D printing model made of plastic, metal, or polymer gypsum. To manufacture 3D printing models, 3D data is required, which we create for you through 3D modeling, CAD design, or 3D scanning. You can quickly and easily upload your existing 3D data via our online shop at https://www.rapidobject.com/upload/. The price is determined in seconds before you...

... sampling: Support in the creation and sampling of tools for series production. Plastic injection molding: Small series and custom-made products. Measurement and testing technology: 3D measurement technology, coordinate measurement technology.