ceramic materials and products Germany

...high resistance to moisture can be treated with ceramic materials...

...Basic assortment of metals, semi-metals, non-metals, ceramics from A to Z...

...Magnesium compounds are preferred raw materials in the dental industry, especially in traditional investment materials and alginate mixtures. For demanding applications in investment materials, we provide a consistent quality of high-purity fused magnesia. With our many years of experience in electrofused magnesium oxides, we understand the importance of consistent reactivity and enable customized product specifications for each customer. Synthetic magnesium oxides and magnesium hydroxides are also used in the production of alginate-based impression materials.

...Ceramic and bio-soluble fiber materials as well as accessories and their applications These products are designed for experienced users as thermal insulation, heat shields, thermal storage, seals, and expansion joints for temperatures up to 1600°C. Properties: - Excellent thermal insulation properties - Resistant to most chemicals except hydrofluoric acid, phosphoric acid, and strong alkalis - Low thermal storage - Good sound absorption - Lightweight...

...High ceramic particle content Applied with a trowel or plastic applicator Applied in a minimum thickness of 6 mm (1/4 inch) or more. Available sizes 1.5 l; 5 l; 20 kg; 12 x 20 kg...

...TEPROSA offers laser and industrial engraving services at its location in Magdeburg. We engrave, mark, and label a variety of materials such as metal (stainless steel, aluminum, anodized aluminum, brass, copper...), plastic, wood, and even ceramics according to your specifications. Our engravings are often used for the permanent and clear identification of products to protect them from...

... materials - Flow rates from 20 l/h to 170,000 l/h Media: for chemical products Drive: with electric actuator Priming: under load, self-priming, submersible Technology: gear technology Sector: for the chemical industry Other features: with mechanical seal...

...Universally applicable for gluing, sealing, bonding, insulating for quick assemblies and repair work. Almost all materials can be connected with and among each other. Adheres to aluminum, non-ferrous metals, steel, glass, ceramics, plastics, wood. Properties: Aging resistant, resistant to oil, fuel, saltwater, diluted acids and salts, industrial exhaust gases. Temperature resistance: -40° to +150° C. Further silicone RTV products available upon request. Item No: 794004 Packaging type: Tube of 85 ml transparent Units per package: 12 pieces...

...Refractory Products Refractory Building Materials, Insulation and Isolation Materials for Industry and Furnace Construction Our customers include, among others: Chemical Industry Non-Ferrous Foundries Hardening Plants Ceramic Industry Lime and Cement Works Power Plants Combustion Construction Companies Furnace Construction (Chimneys and Tiled Stoves...

...Hexagonal acid-resistant industrial tile 100 x 116 x 13.2 mm R9, R10 100 x 116 x 13.2 mm hexagonal acid-resistant industrial tile products. Adhesion is enhanced by the W6 adhesion channel on the back and the conical, slip-resistant R9, R10 surface. With low water absorption, these products are non-porous, easy to clean, and resistant to acids, chemicals, and bacterial growth. FAVO W6 Yellow FAVO W6 Beige FAVO W6 Gray 100 x 116 x 13.2 mm: 100 x 116 x 13.2 mm Yellow: Gray...

... prints. This adhesive is great for heat transfer printing onto glas or ceramic products like wine or spirits bottles as well as promotional or cosmetic products made from ABS. Furthermore, it offers self-crosslinking capabilities which increase the adhesion even further. It shows great resistance against water and heat. The particles in this dispersion are fine dispersed and result in even and repeatable results.

...The Best Way to Clean Windows. 2 Different Microfiber Cloths for Pre- & Post-Cleaning for a Sparkling Clean Result PRE-CLEANING Latest microfiber technology, combined with a PU coating for optimal cleaning results Ideal for cleaning, drying & polishing windows, car paints, ceramics, etc. Perfect glide, dirt & water absorption, drying properties, etc. through perforation Cleans absolutely lint...

... components - No discoloration of your sintered products - Vibration-free lift - Temperature control through a patented, in-house developed platinum/platinum-rhodium thermocouple - Clean atmosphere, as well as very homogeneous temperature distribution due to the use of high-purity materials in the firing chamber - Patented insulated table, allowing sintering objects with a maximum diameter of 65 mm - Optional sintering on two levels, with or without sintering beads - Precise drying, as well as very fast and targeted heating and cooling through proven and significantly...

...The Lapmaster Model 15 is a bench mounted unit ideal for engineering workshops, where flatness and finish are of prime importance. It is equipped with a 381mm diameter serrated cast iron lap plate intended for use with free abrasive compounds. The Lapmaster model 15 can be used to process a wide variety of materials including semiconductors, electro optics, ceramics, metals and other specialty products up to a diameter of 140mm. This popular bench mounted machine is also available in a pneumatic lift version.

...Hard anodizing (hard anodizing or hard coating) is the electrolytic oxidation of aluminum semi-finished products, which creates a hard and extremely abrasion-resistant protective layer for wear and corrosion protection. At temperatures of 4 - 7°C, layer thicknesses of up to 100μm are achieved (depending on the alloy), which exhibit a greater surface hardness (HV > 200) than stainless steel. As a ceramic layer, this coating has poor conductivity and thus also serves as electrical insulation. Processing dimensions: 2750 x 700 x 300 mm Material: Aluminum, aluminum alloys...

...Precise · Economical · Fast · ETCHING TECHNOLOGY IN ELECTRICAL ENGINEERING Due to the wide-ranging use of electronic and electrotechnical components in a variety of end products, etching technology is represented by many different metal form etching parts to meet the modern demands of automation and miniaturization. In the area of bent and unbent shields, heating films, complex lead frames, computer technology, and etched ceramic substrates, we are a reliable and competent partner.

... various mug shapes and sizes. You provide the design, and we implement it in production. aYoh is the specialist for custom-made products according to customer specifications. Our products are available in many different variations. Feel free to ask us; we would be happy to create a corresponding offer for you. Item number: Mug-Thermo effect Weight: approx. 330 g...

... the new product line of Steinbach AG – Form Ceram. This line features additively manufactured (3D-printed) ceramic components with the highest precision, even in single or small batch production. The LCM technology (Lithography-based Ceramic Manufacturing) used by Steinbach AG is the innovative manufacturing process that ensures 3D-printed ceramic products exhibit the same outstanding material...

... opportunities to leverage the competencies of hmb Quarzglas early in the development of your products are unique. This way, you benefit from our manufacturing expertise from the first draft to the prototype. Your ideas are realized immediately. You can test them right away under real conditions on your equipment – and provide immediate feedback on any need for optimization.

Manufacturing high-quality porcelain products for the dining table, decorative porcelain, service provider for artists and designers, creation of ceramic design models, prototypes made of porcelain.

Usedom-VP-Products aims to market regional food and handicrafts as a retail and online business. In addition to regional foods from smaller producers, such as tea, fruit spreads, oil and vinegar compositions, honey, and more, we also offer handicraft products from Mecklenburg-Vorpommern. For example, handmade ceramics from workshops for people with disabilities, wooden jewelry, and handcrafted...

...The pottery "Alte Schmiede" in the heart of Germany, specifically in the Harz region just before the Brocken, is one of the highest pottery studios in existence. Here you will find a wide selection of ceramics.

Manufacturer and dealer of ceramics and stoneware. Dishwasher safe and microwave safe, custom orders and courses.

... components made from various, predominantly high-temperature materials. Over 20 years of know-how and experience guarantee our global clientele high-quality and timely execution of all orders. Processing and coating of machines and machine parts, particularly manufacturing and regenerations, as well as the mediation of such work. Our products: Sandblasting on a contract basis; vacuum heat treatment; turbine blades; water jet cutting on a contract basis; TIG welding; ultrasonic testing; eddy current testing; laser cladding; paint stripping of metal parts; surface coating, oxide ceramic.

... more. For the highest accuracy, high material removal rates, and short process times, we have developed the innovative machine concept of the FLP HIGH PRECISION double-disc machine. The cornerstones of this innovative solution are a deflection- and deformation-free machine chassis made of granite, the use of highly damping materials, and wear-free special bearings with high long-term accuracy...

The company was founded in 1966 by Christoph Goebel and has a 400-year tradition in the production of crucibles. We are a family-owned business based in Großalmerode. From here, we supply our customers worldwide. Our company produces customer-oriented products for top-notch applications. We use only high-quality materials for production. Customer satisfaction and service are our top priorities...

...consistent quality. Color Matching Color fidelity as a visual impression of industrial products plays a central role today. Complex formulations, surface textures, and even different raw materials and substrates can unintentionally lead to color deviations in the production of industrial products. With the ColorMatchingSystem from surface controls, color deviations become visible, and process corrections can be initiated promptly and effectively.