vertical machine Germany

... applicable EU standards. Usable films: Polypropylene, composite, aluminum, barrier, polyethylene. Performance: 30-80 bags/minute Bag weight: up to 1,000g (higher weights with support flap) Bag size (width/length/opening): 50/60/150 mm to 800/1000/350 mm Diameter of film roll: up to 320 mm Packaging material: PE or thermally sealable composite film Film thickness: 10 - 120 μ Power supply: 230V (single-phase) Air supply: 6 bar Machine weight: 400 - 1,000 kg...

...The new vertical bagging machine COMET for packaging products at peak performance. Suitable for packaging mozzarella, granules, chips, candies, and many other products.

...locksmithing, light advertising, roofing, plumbing, sheet metal work, sanitation, and the computer, electronics, and lighting industries. • Affordable stationary solution • Processing of bulky or hollow components • Large horizontal and vertical reach • High-quality joining results due to adjustable stroke limitation • Reproducible results • Suitable for continuous operation • Low noise...

... (static) • Height adjustment according to the user's stature ensures high working ergonomics • Side rotation allows for optimal adjustment of the field of view • Locks without wobbling with 15° adjustment steps and a 60° rotation range (when using the global joint) • The rotation option allows the monitor to be used in either vertical or horizontal orientation • Can be mounted to aluminum profiles or machine chassis using sliding block nuts • Universal mounting holes allow for easy wall installation...

... Its dual-axis tilt function of ±15% and electronic dimming feature make it the ideal choice for avoiding interference from other lasers on site. The machine control function makes it even more versatile. Due to its vertical function an easy adjustment and alignment are allowed, and the 635nm visible laser beam makes it easy to use. All of these features make the RL-SV2S the ultimate tool for construction professionals.

... transport of goods and loads. Space-saving use - easy installation The self-supporting steel frame shaft with sheet metal lining is delivered complete. The minimal pit depth of 70 - 130 mm can be completely omitted with a ramp wedge. A machine room is not required. This allows the SHERPA goods lift to be integrated into existing buildings or shelving systems in the shortest possible time without...

... accelerations of up to 2G to ensure they meet the requirements for long service life and high speeds. The essential features of GORPLATE slat covers are: - Small compression size - Long-term proven and cost-effective - Lightweight, making it suitable for high travel speeds - Acceleration up to 2G - No impact noise - Even extension - High-quality stainless steel slats - Chip and welding splash resistant - Application vertical, horizontal, frontal - Delivered complete with guides – ready to be screwed on!

...sellacan is your partner for drying ovens in the metal packaging industry - we provide various conveyor systems for specific lid types. We deliver a tailored solution for all relevant tasks: - Mesh belt ovens for condensate-free drying of sealing compounds/paints for cans and closures - Pocket ovens (vertical conveyors) with a throughput of up to 400 lids/min per lane - SINUS / OMEGA curved...

...PDS offers drilling units for multi-center machining in parallel, vertical, and right-angle applications. Drilling units are custom spindle constructions with manual tool change. The main drive in these units is a belt drive, which allows for greater operational smoothness. Key features include: - Multi-center drilling units - Individual spindle actuation - Custom spindle exchange - Housing made from solid bars – no casting - All spindles are right-handed and use standard tools - Spindle tools are interchangeable - Custom drilling units available upon request...

...▪ CNC controlled and conventional ▪ Lathe up to Ø 710 x 5,900mm ▪ Vertical turning up to Ø 1,450 x 1,200mm ▪ CNC controlled up to Ø 580 x 1,500mm...

... and vertical composite tools, fixtures, and deburring tools, as well as automated production lines. Upon request, you will receive the design in paper or digital format. Even in the design phase, our creativity determines the future productivity and lifespan of the tools.

...This machine offers you a high volume reduction at minimal cost. You will receive bales the size of a 1/2 Euro pallet weighing up to 60 kg. The press is particularly suitable for smaller and medium quantities of loose paper, boxes, cardboard, and films. Advantages - Low space requirement - Clean working environment - Baler easily transportable with a pallet truck - Easy operation – "Plug it in and you're done!" - Bales up to 60 kg for cardboard - Quick and comfortable binding of bales thanks to the attached knife - Robust construction ensures a long service life.

... HMI and SCADA system with touch screen integrated user friendly and simplified software. Available certification up on your request UL, CE, GMP, FDA, ASME. Available documents up on your request I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification. Linear system. Filling capping labeling machine . Bottles:Filling, Capping, Labeling Pharmaceutical:Machine...

... - Linear systems (pneumatic, electric, mechanical) - Curve-controlled drives, linear and handling systems Workpiece carrier circulation systems: Horizontal, vertical Integration of SIM workpiece carrier quick insertion: Yes Integration of workpiece carrier change systems: Yes Indexing systems: Drive electromechanical / pneumatic systems / curve gear Long-stroke systems: Drive electromechanical...

...Our vertical portal grinding center RP 8 is the optimal machine for the complete processing of highly complex workpieces in a single setup. The RP design impresses with the following unique features: —5-sided complete machining —Highest processing and measurement accuracies —Stable cast constructions —Hydrostatic bearings in the X, Y, and C axes —Wear-free direct drives in the X, Y, and C axes...

...With this continuous machine for high volumes, we perform various work steps: end and vertical drilling, doweling, and also sawing.

... phases Safe operation through two-hand control Working pressure of 2.5 bar Vertical film forming Scope of delivery Basic assortment of films Air connection hose Item No.: D-3200 (red housing), D32001 (silver housing) * In addition to the two-year warranty from Dreve Dentamid GmbH, we offer an additional year of warranty for this product free of charge (referred to as the “dlgs24 warranty...

...The machine is designed for the vertical transport of various food products. Application Area: Vertical transport of various products specifically for: - Fruits - Vegetables - Meat - Nuts, etc. Construction: The vertical elevator belt features a sturdy belt body and can be easily integrated into a processing line. The dimensions and design are tailored to customer-specific requirements...

... the machine flyer. A three-bladed impeller rotates at the bottom of the vertical, cylindrical mixing vessel, to create a vortex type of circulation for the material to be mixed. Very short mixing times and excellent mixing quality are achieved, even if the product components are extremely different. The separately driven chopper (only for the 5, 10 and 15 l vessel) is designed for breaking up of agglomerated material, for uniform moistening, wet granulation and streak-free mixing of dyes, as required. 1:Exchangeable vessel with a volume of 1, 3, 5, 10 or 15 l 2:Chopper (for 5, 10 and 15 l vessels)...

... allows them to be re-used later for a new conveyor path. By connecting a serpentine conveyor that conveys upward and one that conveys downward, the machine can be used as a storage system. Technical data —Conveyor body material: stainless steel —Gradient angle: up to 6° —Chain widths: 82.5 mm, 114.3 mm, 190.5 mm —Conveying speed: up to 50 m/min —Product weight: up to 5 kg Optional equipment —Moving deflecting pulleys —Product guides,design depending on product —Supports to stabilize the conveyor systems at the desired conveying height —accessories: sensors, stoppers, etc.

... component. Hose lines can be neatly routed through the deflection pulley. Advantages: easier positioning of the riveting tool precise vertical guidance of the riveting tool prevention of incorrect riveting due to misalignment of the riveting tool time savings in handling riveting tools Technical Data: Working radius: 120 mm to 470 mm Stroke: 700 mm Height: 1,150 mm Load capacity: 6 kg Device mounting: upon consultation...

...Rotatable ball knobs GN 319.2 are preferably used when access is from the axial direction, e.g., for vertical mounting of handwheels.

...High-build putty for levelling dents, scratches and bumps in the car repair as well as the automotive and machine manufacturing. Very good adhesion on iron, steel, aluminum, GRP and galvanized substrates. Highly stable on vertical surfaces. Reference:6.2360.1600...

...Fiber Splicing Machine Designed for splicing fibers. Other materials can also be processed. The installation is carried out using a KMK drive LW 15 in vertical operation. The spool performs a vertical lifting movement and a rotating motion.

... entire systems, as well as smaller maintenance and repair work. We focus on: - Conveyor belts, which serve automated transport in countless operations and are also an important component of our PaperSpike / PaperStar models - Screw conveyors, which are ideal for vertical transport in confined spaces - Chain conveyors, which offer a sensible alternative to conveyor belts depending on the goods being transported...

... the arrangement of the raceways, profile rail guides can accommodate loads in both vertical and horizontal directions. In combination with innovative lubrication systems, they are a low-maintenance machine component with a long service life.

... enamels and 100% UV paint systems cannot be used. The horizontal version Furthermore, it is possible to use the system as a horizontal underfloor extraction system. This version is used, for example, by a machine manufacturer for large parts. In addition, a drag conveyor with gulley extraction is used there in order to automatically transport the particles cleaned off the brushes out of the pit...

...Lathe VDF Boehringer Turning diameter over bed: 480mm Turning length: 1200mm Milling machine Travel path X axis: 1000mm Travel path Y axis: 330mm Travel path Z axis: 450mm Spindle: Horizontal and vertical spindle SK50...

... manufacturers under a private label arrangement such as Nordson Corporation. Nutro has worked closely with these OEMs to design machines according to their budgets, specifications and preferences. The scope of delivery includes both standard spray gun drives which can be used in series machine lines as well as customer specific machines as required.

... decades. Customer-specific special solutions are developed and implemented by us. The advantages of the Orbital Cutter OC Optimized cutting length tolerances through specially developed cutting application Chipless, vertical cut Servo controller of the latest generation Aluminium multilayer pipes can also be cut High effectiveness with simple operation The Orbital Cutter OC at a glance A cut-to-length system with the highest quality The orbital cutting machine OC machine meets your high quality requirements in many aspects.