temperature monitoring Germany

...Electronic temperature monitoring devices - Thermal cut-out - Thyristor units - Temperature controllers...

...The CS400 is a modular system for non-contact measurement and monitoring of the surface temperature of rotary kilns. The system reliably detects so-called "Hot Spots" on the rotary kiln, which may indicate faulty linings. This helps prevent malfunctions or damage to the kiln and costly production stoppages. At the core of the CS400 system is an MP150 line scanner with 1024 data points per scan...

... system" for wear through deviations in oil condition values o configurable specific limit values o precise real-time data • modularly implementable oil sensors • numerous options for data transmission • optional automatic data interpretation • also suitable for high-viscosity oil • also suitable for oil with air entry / air bubbles Sensors: • pressure sensors (bar) • moisture sensor (RF in %) • temperature sensor (°C) • sensor for oxidation rate • particle content (>4, 6, 14, 21 up to 250 micrometers (µm))...

...Do you want to measure the temperature in your process or monitor it continuously? Ellabs Precision Measurement Technology offers the right temperature sensors for nearly all applications. Our selection of temperature sensors ranges from rigid and flexible sensors for data loggers and monitoring systems to thermocouples for wired measurement systems. This wide range provides the right equipment...

... Features: Multiple kiln support Added ThermoView TV40 Thermal Imager support (Additional hardware required) Added Pyrometer support – including Mi3 and Endurance units – for Burn Zone and Shadow monitoring (additional hardware required) Analog and Digital I/O (Wago) “One brick” resolution hot spot detection, even in shadowed areas CS400 System Software The CS400 Kiln Shell Imaging System features...

...Pneumatics, hydraulics, sensors, temperature, pressure, flow, level, display instruments (digital/analog), alarm systems, all electrical components.

... you with regard to your testing tasks and, together with you, transfer the entire testing process into a specification sheet. OUR OPPORTUNITIES 2-chamber system air-air Test chamber volume up to 130 liters Temperature range hot chamber 50°C to 200°C Temperature range cold chamber -80°C to -100°C Change between chambers <15 seconds Maximum test material weight 25 kg State monitoring of the test specimens during the test...

...ODE infrared detectors capture infrared rays from hot objects ranging from 300° to 2000° C. ODE infrared detectors from EGE are designed with fiber optic cables and auxiliary optics for use under extreme conditions up to 350°. The sensors provide a 4…20 mA output and additionally feature an adjustable switching threshold for the PNP switching output or relay output. The detectors are used, among other things, for measuring and monitoring process temperatures, for example in metal processing or glass manufacturing.

... output 201 W, torque 192 mNm, IP 54 Velocity range: 10 - 5,000rpm Positioning: 1000 pulses/rev., analog hall sensors Motor protection: motor current monitoring Interface: 6-pole plug for motor winding, 5-pole plug for hall sensors Cable length: 2m Dimensions (L x W x H): 254 x 84 x 93 mm Weight: approx. 3.9 kg Remarks: * Customized solutions on request.

...The SIKA KombiTemp® consists of a SIKA machine glass thermometer and an electric temperature sensor tailored to customer specifications, all housed in the same casing and immersion tube as the machine thermometer. The combination of the electric sensor with a local display offers many advantages: • Temperature monitoring from two completely independent measurement systems. • Significantly...

...The Feuchtesensor Plus provides continuous measurement of three oil parameters, namely the determination of the relative humidity value, the relative permittivity, and the conductivity of the oil. Initially, the measurement values are displayed during the learning phase at the current temperature and, after the completion of the learning phase, also at a reference temperature of 40 °C. Thanks to...

...The standard firmware for all electronic systems provides precise control of speed and position. Other requirements can be programmed customer-specifically by KAG. Examples of implemented customer requirements: — Motor speed control for single-grain sowing unit — Valve control actuated via digital inputs — Automatic door control with temperature monitoring — Target position generator...

...The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher...

...The DK-BT 01 EM is primarily used in mobile weather stations and handheld measuring devices, while the DK-BT 01 ES is utilized in greenhouses and temperature monitoring and control systems. The sensor elements can be varied for both versions according to customer requirements. The following sensors are used: PT 100, Pt 1000, LM 35, NTC, or SMT 160. The insertion depth of the soil temperature...

... enable precise measurements and thus provide a reliable basis for the control and optimization of industrial processes. From pressure and temperature sensors to flow meters, we offer a variety of solutions that enable accurate recording of process parameters. Versatility for various applications: Our range of industrial metrology includes a wide range of products suitable for various applications, be it chemical, petrochemical, food, power generation or other industries.

... according to DIN EN 54-5 Ambient Temperature Range: non-Ex area -40 °C to +85 °C, Ex area -20 °C to +60 °C Process Temperature Range: non-Ex area -40 °C to +160 °C, Ex area -20 °C to +60 °C Storage Temperature Range: -20 °C to +60 °C Relative Humidity: 0 to 95 %, non-condensing Installation Location: dust-explosive areas, Zones 20, 21, 22 Protection Class: IP 66...

...• Programmable pressure and temperature sensor • Ideal as a dry run protection for pumps and for process monitoring • Pressure range from 0.5 to 10 bar • Alternative signal output interfaces (current loop / relay / Modbus RTU) • Compact version for space-saving installation • Flex version for hard-to-reach or heavily contaminated areas Additional menu for monitoring pumps, with two inputs for starting and stopping the pump. Housing material selectable: PVC-U, PP, and PVDF Sealing material selectable: EPDM, FKM...

... horizontal, vertical or inclined positions Accurate measurement result, since the reading is independent of the temperature and viscosity of the fluid Minimum failure costs due to simple function monitoring, rapid fault analysis and the possibility of simple repairs on site Areas of application To measure heating fuel consumption by oil burners (for example, in heating boilers, industrial furnaces, tar processing plants) Consumption monitoring and optimisation (ships, generators and large vehicles, etc.) Flow measurement for mineral oils Optional remote processing and integration into...

...Valilog, the data logger system from Valitech, is tailored to meet the requirements for validations and process monitoring under high temperatures and pressures. Our system, consisting of pressure loggers, temperature loggers (with long and short sensors), and dual temperature loggers, along with the corresponding software, is specifically designed for use in the validation of processing...

... temperature monitoring for pipes with diameters of 4...300 mm ■ Patented measurement system ■ High measurement accuracy, fast response time ■ Easy installation ■ No welding, no process interruption ■ No additional insulation required ■ Measurement unit can be recalibrated ■ Temperature switch in 2-wire technology, current output 4 and 33 mA, switching function max. normally open ■ Switching point...

... monitoring the flow in liquid media.","Medium":"liquid or air","Sensor Element":"Sensor","Flow Setpoint Range":"with ASW unit 0.05/0.5 … 3/20 m/s","Medium Temperature":"-15 … 80 °C","Additional Description":"LED for indicating supply voltage","Max. Pressure":"20 bar"}...

... Junior allows for an operating temperature of 250°C. The fan housing and impeller are made entirely of stainless steel, ensuring high protection against corrosion. The fan motor is a continuously adjustable, temperature-resistant special motor with temperature monitoring via thermal contacts. The KA-I Junior is easy to install and can be tilted at the chimney head for chimney cleaning without the need for tools.

...InfraWarm® infrared heaters are the perfect solution for a variety of applications. Whether as a temporary and local supplementary heater or as a comprehensive heating system for large and small buildings. The simple installation and commissioning allow for quick and convenient use in any location. Thanks to its integrated surface temperature monitoring, it provides pleasant warmth while...

...The pH-Log3030 is a self-sustaining data logger for unsupervised measurements and logging of pH and temperature. It is perfectly suitable for water quality surveys, e. g. in bodies of water or sewer tunnels, or for monitoring in transportation, e. g. fish or fluids. Once the pH Log3030 has ben set up with a PC it records measurements of the chosen parameters in a freely programmable interval.

...RW3 submersible motor mixer. Motor protection class IP68. The motors are available in a power range from 7.5 to 22 kW. The oil chamber is double-sealed (2 x mechanical seal). With gearbox to reduce motor to propeller speed (planetary or spur gear). The slurry mixer is equipped with sensors for seal and temperature monitoring. The connection for seal and temperature monitoring is only possible...

... - 2D detail visibility of up to 150 nm with new water-cooled 190 kV transmission tube - Temperature stability with granite-based manipulation - Innovative touchscreen for intuitive operation via graphical symbols - Application flexibility using trajectories such as helical CT scan, horizontal field-of-view extension, virtual rotation axis, and standard Quick/QualityScan - Precise metrology MPESD = 3,9 µm + L/75, measured as a deviation of sphere distance referring to VDI 2630-1.3 ...

...Indoor Air Quality Monitoring, Apple HomeKit, IFTTT Compatible, WiFi compatible (2.4 GHz), Support for iOS and Android smartphones/tablets Technical Specifications: • Battery capacity 2300mAh • Input voltage 5.0 V DC • Max. current consumption 1A, power 2.5W • Display LCD 2.5" • Device color white, Ø 11cm, depth 9cm • Weight 290g • Wi-Fi 2.4GHz • App for iOS and Android Laser Egg: Laser Egg3, Measures PM2.5 particles, VOC chemicals, temperature, and humidity Color: White...

... cleaning) Features of Triple Plus-IR Permanent display up to 4 gases in real time at the same time. Shock- and waterproof Self test of all functions of sensor, battery, electronic and acoustic/optical alarm Bright, wide-angle flashing alarm display Free adjustable alarm points Integrated gas probe pump with reliable membrane technology PC- interface for configuration of device Technical data of Triple Plus-IR Size (cm): 11,8 x 16,7 x 7,3) Weight (g): 900 Application temperature: -20 up to +50°C Alarm: optical, vibration and acoustic (95dB) low, high, Stel, MAK, OL (exceedance of measuring...

... soldering process. Peters heatsink paste for thermal management of LED modules, screen printing of thermal pads and thermal vias. Latest generation vapor phase reflow soldering technology with process monitoring, stress-free soldering at a maximum peak temperature of 235°C for critical components such as LEDs.

...ROCAR Smart Alcohol Detection Watch Professional Alcohol Detection | Accurate Body Temperature Detection | Sports Health Monitoring...