switching contact Germany

... oxide layers are rubbed away – the electrical contact is made reliably. — Door contact with contact plates or contact pins — Mechanical lifetime: more than 10 million switching cycles — Protection class IP20...

...—detects objects from 150 mm to 1500 mm without contact —insensitive to adhering aqueous media —with two switching points or analog output —single-piece stainless steel housing —for applications in washing processes —for use in the food industry...

...Compact DC Contactors up to 3000A Albright, as a leading manufacturer in the field of switching technology, offers the complete range of DC power contactors. From simple screw connections, copper rail mounting, to PCB mounting, we can always provide you with the suitable contactor for your application. Coil designs in CO, INT, highly Intermittent Contact configurations in NC, NO, changeover...

...Extender card for 19"-systems DIN 41612 C64 a+c Epoxy fibre-glass FR4 1.50 mm Single-sided 70 µm Cu Solder stop mask Component print Removable short-circuit bridges and two measuring posts for each continuous strip Signalling line pin 2 - 31 Large signalling line pin 1 + 32 Switching voltage 10 mV - 60 V Switching current 0.5 A at 24 V Rest current at 20° C max. 2 A Contact resistance 20 mOhm Extender card: 100% electronically tested Size 100.00 x 278.70 mm (132.50 x 330.70 mm with handle)...

... mechanical resonance frequency of approximately 1200 Hz. When the vibrating fork is covered with filling material, the frequency changes. This change is detected by the built-in electronics and converted into a switching command. The integrated function monitoring detects the following faults (red LED blinks): • Interruption of the connection line to the piezo elements • Extreme material wear on the...

... play - Electrical testing and measurements: electrical quantities, insulation measurements, switching and conduction behavior Industry-independent application, e.g., in the pharmaceutical industry, medical technology and cosmetics, electronics, and automotive industry.

...DC contactors for voltages up to 48 VDC and in closed or encapsulated design single-pole opening or closing contact - DC contactors in closed or encapsulated design - for continuous load currents up to 200 Amperes and for directly switching inductive loads - Switch type: single-pole normally open or changeover switch, double breaking contact - Max. rated load voltage: 48 VDC - Inrush currents up to 600 Amperes - Coil voltage: 6, 12, 15, 18, 24, 36, and 48 VDC...

...Chemical execution (housing with plastic coating) Switching housing with surface protection (chromated and powder-coated). Protection class IP 65. The parts of the sensor systems that come into contact with the medium are made of material 1.4571.

...{"Protection Class according to EN 60529":"IP 40 (see contact type)","Printing":"wet magnet (customer printing possible)","Switching Function":"3/2 Ways (2/2 Ways on request)","Thermal Class of Insulating Materials according to DIN VDE 0580":"F","Medium Quality according to ISO 8573-1":"Compressed air of quality class 3, 3, 3","Voltage Tolerance":"± 10 %","Electrical Connection":"USC","Ambient...

... housing with a quick-release mechanism is used for this. Housing data: External dimensions: 240x190x145mm (without antenna) Protection class: IP65 Weight: 4.4kg including lead-gel battery (12V/7.2Ah) Switching capacity: 4x 6A (silver contact relay 1xUM) Application e.g.: Remote switching of 1-4 hydraulic solenoid valves...

... contact and activates it. The repulsion between the similarly charged permanent magnets supports the buoyancy (version VK..deviating). As soon as the level drops again, the float follows and reactivates the reed contact. The level switches of the VK series are made of plastic and are available with various float variants and PVC jacketed cables. Switching function: Contact opens at falling level Nominal pressure: PN 10 Temperature ranges: Medium Max. 100 °C Ambient -25...70 °C...

...LED Parking Display "Free/Occupied", housing in Traffic Blue/RAL5017. The control/switching is done via a switching line with +12VDC. Of course, other switching voltages can also be implemented, and this display type can be programmed via Ethernet or serial interface – also with an additional remaining space display (after protocol approval). Application area: outdoor Letter height: 160mm Max. reading distance: approx. 65-70m LED color: RGB-SMD => 7 colors Control: contact input switching...

...The bistable switch is suitable, for example, for cable pull or float level indicators to be mounted on the display tube. The changeover contact of the BSS switches depending on the position of the triggering element (counterweight/float). Typical applications include limit detection or 2-point control (min/max control) in containers. The BSS switches and holds the contact as long as the switching condition is met. Accessories from Stübbe: • Float and counterweight with magnet • 90° elbows • Clear PVC pipe • PP / PTFE rope • Float for bypass level indicator • PP cable ties...

... unit contains two semicircular disks, which can be adjusted against each other by means of a screwdriver via a worm drive, the switching point position encompassing a switching angle from about 10° up to 350° at maximum, and over 360° of the cam shaft. Sets of break-before-make contacts are used, each comprising one normally-closed and one normally-open contact. For positional back-indication via coupling or gear, one or two angular position transmitters can be operated on the camshaft, optionally with analog or digital output signal.

... TERMSERIES couplers can be securely bridged. They are available in pole numbers 2/10/26 and 51, as well as in the colors red, blue, black, and orange. Their special advantages: - Customizable cross connection with 51 poles - Additional bridge prevents deformation of the spring - Vibration-resistant Contact us or browse our product catalog to find the right cross connector for your application!

... EN 10204-3.1 Classification in SIL2 Pressure type: Differential pressure transmitter Housing: Robust stainless steel housing, protection class IP 69K, parts in contact with the measuring medium made of stainless steel Output signal: 4…20 mA output signal: Alternatively with PROFIBUS PA Display: Multifunction display with 5-digit digital display and bar graph Accuracy: Accuracy ≤ 0.15 %...

...Ready-to-connect sensors for outdoor applications (various gases, e.g., CH4, H2S, NO2, O3, SF6, etc.) with relay, analog, or bus output (MODBUS RTU) Gas sensors for a variety of gases that need to be detected in industry, environment, and agriculture. The devices are delivered ready for connection. Output signal: Switching contact...

... drive technology (including electric and geared motors as well as gearboxes) and automation technology (including industrial switching technology, sensor systems, and control cabinet components) from renowned German manufacturers such as Siemens. Why should you choose HHEM HAMBURGER ELEKTROMOTOREN GmbH for your purchases? Quite simply: We offer high-quality products at competitive prices. Our excellent price-performance ratio makes a significant difference compared to other providers. Do not hesitate to contact us. We are also happy to accept special orders.

... large part is also available in stainless steel. You will also receive the necessary assembly materials and pneumatic components. Deliveries outside Germany are routine for us, and we also handle the preparation of any required customs documents. Technical documents can be found in the e-shop as a download for the item. No registration required! Customers in Switzerland should contact Welafix Schweiz GmbH www.welafix.ch Delivery exclusively to commercial customers. Get a 5% discount on orders through our e-shop.

Development, design, calculation, construction, testing, and inspection of medium and high voltage switchgear, switching devices, contact systems, bushings, gas-insulated, gas-tight enclosures.